• Korean Journal of Radiology
• /
• v.23 no.2
• /
• pp.271-279
• /
• 2022

Objective: To compare the clinical and radiologic findings between perforated and non-perforated choledochal cysts in children. Materials and Methods: Fourteen patients (mean age ± standard deviation, 1.7 ± 1.2 years) with perforated choledochal cysts (perforated group) and 204 patients (3.6 ± 3.8 years) with non-perforated choledochal cysts (non-perforated group) were included between 2000 and 2019. All patients underwent choledochal cyst excision after ultrasound, CT, or MR cholangiopancreatography. Relevant data including demographics, clinical symptoms, laboratory findings, imaging findings, and outcomes were analyzed. Statistical differences were compared using the Mann-Whitney U test and Fisher's exact test. Results: Choledochal cyst perforation occurred only in children under the age of 4 years. Acute symptoms, including fever (p < 0.001), were more common in the perforated group than in the non-perforated group. High levels of white blood cells (p = 0.004), C-reactive protein (p < 0.001), and serum amylase (p = 0.002), and low levels of albumin (p < 0.001) were significantly associated with the perforated group. All 14 patients with perforated choledochal cysts had ascites, whereas only 16% (33/204) of patients in the non-perforated group had ascites (p < 0.001). In the subgroup of patients who had ascites, a large amount of ascites (p = 0.001), increase in the amount of ascites in a short time (p < 0.001), complex ascites (p < 0.001), and perihepatic pseudocysts (p < 0.001) were more common in the perforated group than in the non-perforated group. Conclusion: Children with perforated choledochal cysts have characteristic clinical and radiologic findings compared to those with non-perforated choledochal cysts. In young children with choledochal cysts, perforation should be differentiated in cases with acute symptoms, laboratory abnormalities, and characteristic ascites findings.

• Journal of Life Science
• /
• v.18 no.6
• /
• pp.789-795
• /
• 2008

To study the possible use of probiotics in fish farming, we evaluated antagonism of antibacterial strain Bacillus amyloliquefaciens H41 against the fish pathogenic bacterium Vibrio anguillarum NCMB1. The purification of growth inhibition factor produced by B. amyloliquefaciens H41 was achieved by obtaining supernatant of this bacterium. The growth inhibition factor was purified to homogeneity by 70% ammonium sulfate precipitation, DEAE-sephadex A-50 ion exchange chromatography, sephadex G-200 gel filtration column chromatography, and sephadex G-50 gel filtration column chromatography with 40.8 fold of purification and 2.9% yield. The molecular weight of the purified growth inhibition factor was 48 kDa as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The optimum pH and temperature for the growth inhibition factor were pH 7.5 and $30^{\circ}C$, respectively. The activity of growth inhibition factor was enhanced slightly by some metal ions, such as $Mg^{+2}$, $Mn^{+2}$, but was inhibited by the addition of $Co^{+2}$, $Hg^{+2}$, $Zn^{+2}$ and $Ag^{+2}$. NaCl stability of the growth inhibition factor was observed with 50% residual activity at 3% NaCl concentration. Toxicity test showed that the purified B. amyloliquefaciens H41 growth inhibition factor did not affect the live of Japanese flounder (Paralichthys olivaceus) and the effectiveness was 78% of residual lethality compared to commercial antibacterial agents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6C
• /
• pp.249-257
• /
• 2012

The reinforced earth method is financially viable. Furthermore, it overcomes environmental limitations and is therefore employed in retaining walls, slopes, foundations, roads, embankments, and other structures. However, in some cases, reinforced retaining walls are not strong enough in the curved sections and can collapse. Such mishaps are believed to occur because of an unsatisfactory analysis of the curved sections of a reinforced retaining wall. Accordingly, with the aim of investigating the workability and structural safety of curved sections of various types, this study investigates the differences in the estimated horizontal displacements of curved sections of various types and subsequently uses this information to study and analyze preliminary data so that appropriate measures can be taken to resolve alignment issues. The results of an experiment reveal that when a load is applied to curved sections of both concave and convex types, the largest horizontal displacement occurs at the center of the section. In the concave form, the earth pressure force is directed inward, whereas in the convex form, this force is directed outward. As a result, the horizontal displacement in convex forms is larger than that in concave forms. Convex reinforced earth structures are subjected to earth pressures as well as lateral earth pressure, therefore horizontal displacements in convex curved sections is larger than that of concave curved sections.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.4
• /
• pp.30-41
• /
• 2010

Research was initiated to investigate germination characteristics and germination pattern of creeping bentgrass (CB, Agrostis palustris Huds.). Seven varieties of CB were evaluated in the study. An alternative condition for a CB germination test required by International Seed Testing Association (ISTA) was applied in the experiment, consisting of 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$ (ISTA conditions). Daily and cumulative germination patterns were measured and analyzed on a daily basis. Significant differences were observed in germination pattern, days to the first germination, days to 50% germination, days to 85% germination, and germination percentage. Germination rates were different among the treatments at the end of study. There were significantly considerable variations in early germination characteristics and germination pattern among CB varieties. The first germination in all entries was initiated between 4 and 5 DAS (days after seeding) under ISTA conditions. Generally, the first germination percentage was 5 to 25%. However, such Penn-series varieties as Penn A-1, Penn A-4 and Penncross were much more vigorous over others, resulting in 50 to 75% in the first germination percentage. It took 4 to 10 DAS in reaching to days to the 50% germination, being 5 days in difference among the varieties. Days to the 85% germination were 5.90 to 11.75 DAS under ISTA conditions, being 5.85 days in variety difference. It means 1 to 2 days after days to 50% germination. Penn A-1 was the fastest variety, while T-1 the slowest one. Considering days to the first germination, days to 85% germination, and germination pattern etc, Penn A-1, Penn A-4, Penncross and L-93 were regarded as excellent varieties under ISTA conditions. From this study, in-depth information on germination characteristics and pattern would be usefully applied for golf course design and construction, when established with CB.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.107-112
• /
• 2013

The aim of this study was to test hypothesis that low sink size could mitigate deterioration of grain filling characteristics under high grain filling temperature. To achieve this aim, we selected Donganbyeo as a tolerant and Ilpumbyeo as susceptible variety to high temperature during grain filling period through screening 6 rice varieties. Then their spikelets number and the ratio of superior and inferior spikelet were compared. Grain weight and head rice ratio of Ilpumbyeo decreased significantly in high temperature. Ilpumbyeo had more spikelets than Donganbyeo. However, there was no significant difference between two varieties in the ratio of superior and inferior spikelets. So we tried to investigate the varietal difference of grain filling characteristics with removing inferior spikelets. Removing inferior spikelet in both of varieties could recover grain weight but not improve head rice ratio under high temperature. These results showed that sink/source ratio affected grain weight but didn't affect head rice ratio. Therefore, new approach was required to improve head rice ratio beyond sink/source ratio under high temperature.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.357-366
• /
• 2010

This paper presents experimental results about shear wall with various lateral reinforcement details in boundary elements. The research objective is to study the structural behavior of shear wall with boundary column confined by rectangular spiral hoops and headed cross ties developed to improve workability in the fabrication of boundary columns. These two details can be fabricated in a factory and put together on-site after being delivered so that the construction work may be reduced. Main parameters in the experimental study were the types of hoop and cross tie: rectangular spiral hoop and headed cross tie vs. standard hoop and cross tie with hook. Four half scaled shear wall specimens with babel shape were made and tested by applying horizontal cyclic load under constant axial force, 10% of nominal compressive strength of concrete. Based on the test result, it was shown that the shear wall with rectangular spiral hoop and headed cross tie in boundary columns has structural capacity compatible with conventional shear wall. The specimen SW-Hh which has bigger hoop bar and higher volumetric ratio of transverse reinforcements than other showed improved energy dissipating characteristic but it presented a rapid reduction of strength after peak point. The results indicates that, it is necessary to consider volumetric ratio of transverse reinforcements as well as hoop space in designing of shear wall with boundary columns for improved strength and ductility.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.269-277
• /
• 2017

Purpose: The aim of this study is to compare the performance of two piezoelectric engine systems by surveying satisfaction from dental clinicians. Materials and Methods: Two piezoelectric systems were evaluated: TRAUS XUS10 (Saeshin), PIEZOSURGERY touch (Mectron). For this study, 20 dentists responded to the 11 questionnaires in which 5 point Likert-type scale was used. The two devices were operated for 10 seconds and measured 5 times to compare the maximum noise values. In heat emission test, the handpiece was operated for 3 minutes and heat was measured at three positions each. Results: TRAUS XUS10 had higher satisfaction level on motor noise (P < 0.05). About function key and handpiece heat generation, PIEZOSURGERY touch showed higher satisfaction (P < 0.05) than TRAUS XUS10. The maximum noise level for each of the devices was confirmed to be 56.6 dB for the TRAUS XUS10 and 56.0 dB for PIEZOSURGERY touch. The two piezoelectric engines satisfied the safety standards with an operation temperature below $41^{\circ}C$ after having been operated for 3 minutes. Conclusion: Except for the function key and handpiece heat emission, TRAUS XUS10 has comparable performance with PIEZOSURGERY touch.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.1
• /
• pp.80-83
• /
• 2018

Purpose Assessment of Serum Thyroglobulin (sTg) value in total thyroidectomy patients having an ablation dose of radioactive iodine indicates remaining cancer or metastasis. Especially, sTg in patients on withdrawal thyroxine or thyrogen administration for radioiodine ablation is an important indicator to determine the direction of further treatment and prognosis. Current guidelines suggest measurement of sTg is performed at 72 hours after the last injection of thyrogen. and assumes that sTg reaches maximum serum levels at that time. The purpose of this study is to evaluate the variation of sTg measured after thyrogen administration. Materials and Methods We compared with sTg performed at 24hours(D0) and 72hours(D2) after the last injection of thyrogen. We reviewed D0 and D2 from 276 patients were divided them into three groups according to ablation dose of radioactive iodine, 5mCi(A group), 30~80mCi(B group) and 100~200mCi(C group). We used T-test for comparison between D0 and D2. sTg was measured in serum using immunoradiometric assay (Tg-plus RIA; BRAHMS, Berlin, Germany). Results There is no critical variation between D0 and D2 in A group(n=100)(P=0.32), The case of increase(D2>D0) is 45, no change(D2=D0) is 23, decrease(D2D0 is 91, D2=D0 is 28, D2D0 is 19, D2=D0 is 2. The biggest increase is 143.6 ng/mL from 98.4 to 242. Conclusion There was a significant difference in the group over 30mCi. and the case of D2>D0 is 45%, 58.7%, 90.5% for each group. therefore, D2 increased as the dose of radioactive iodine increased. Furthermore, the most sTg values of D0 and D2 are variation under 2.0 ng/mL, so reproducibility as well as sensitivity of sTg will be important at values below 2ng/mL.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1520-1520
• /
• 2001

Food adulteration is a serious consumer fraud and a potentially dangerous practice. Regulatory authorities and food processors require a rapid, non-destructive test to accurately confirm authenticity in a range of food products and raw materials. Olive oil is prime target for adulteration either on the basis of the processing treatments used for its extraction (extra virgin vs virgin vs ordinary oil) or its geographical origin (e.g. Greek vs Italian vs Spanish). As part of an investigation into this problem, some preliminary work focused on the ability of near infrared spectroscopy to discriminate between virgin olive oils from separate regions of the Mediterranean i. e. Crete and the Peloponese. A total of 46 oils were collected: 18 originated in Crete and 28 in the Peloponese. Oils were stored in a temperature-controlled room at 2$0^{\circ}C$ prior to spectral collection at room temperature (15-18$^{\circ}C$). Samples (approximately 0.5$m\ell$) were placed in the centre of the quartz window in a camlock reflectance cell; the gold-plated baking plate was then gently placed into the cell against the glass so as to minimize the formation of air bubbles. The rear of the camlock cell was then screwed into place producing a sample thickness of 0.5mm. Spectra were recorded between 400 and 2498nm at 2nm intervals on a NIR Systems 6500 scanning monochromator. Spectral collection took place over 2-3 days. Data were analysed using both WINISI and The Unscrambler software to investigate the possibility of discriminating between the oils from Crete and the Peloponese. A number of data pre-treatments were used and discriminant models were developed using discriminant PLS (WINISI & Unscrambler) and SIMCA (Unscrambler). Despite the small number of samples involved, a satisfactory discrimination between these two oil types was achieved. Graphical examination of principal component scores for each oil type also holds out the possibility of separating oils from either Crete and the Peloponese on the basis of districts within each region. These preliminary data suggest the potential of near infrared spectroscopy to act as a screening technique for the confirmation of geographic origin of extra virgin olive oils. The sample presentation strategy adopted uses only small volumes of material and produces high quality spectra.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.541-547
• /
• 2017

In Yongwon channel, its natural flow of seawater is blocked by the construction of Busan Newport including the container berth. The channel was transformed into a narrow and long one, where it is possible that ships are only allowed to pass through the north-side channel of Gyeonmado located at the point of river mouth to Songjeongcheon. So it is considered that the changes in the terrain characteristics of Yongwon channel is likely to alter the circulation of sea water, thereby changing its water quality. Contaminants are accumulated from the sediment release. In this study, before and after dredging the sediment release test was performed. As a result, after the sediment dredging is performed, the reduction rate was higher at the same point. The results show that the water quality can be improved by dredging. Each group (A~C) reduction rate of the evaluation of the reduction rate of 4.64% T-N, 18.00%, 18.59%, respectively. T-P rate of 24.75% reduction, 24.17%, 44.08%, respectively. COD reduction rate was 18.57%, 19.76%, 38.08%, respectively. These results can be used as basic data for controlling the contamination by dredging in Yongwon channel.