• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.35-46
• /
• 2016

Purpose : BoS(Base of Skull) Frame, the fixation tool which is used for the proton of brain cancer increases the lateral penumbra by increasing the airgap (the distance between patient and beam jet), due to the collision of the beam of the posterior oblique direction. Thus, we manufactured the fixation tool per se for improving the limits of BoS frame, and we'd like to evaluate the utility of the manufactured fixation tool throughout this study. Materials and Methods : We've selected the 3 patients of brain cancer who have received the proton therapy from our hospital, and also selected the 6 beam angles; for this, we've selected the beam angle of the posterior oblique direction. We' ve measured the planned BoS frame and the distance of Snout for each beam which are planned for the treatment of the patient using the BoS frame. After this, we've proceeded with the set-up that is above the location which was recommended by the manufacturer of the BoS frame, at the same beam angle of the same patient, by using our in-house Bos frame fixation tool. The set-up was above 21 cm toward the superior direction, compared to the situation when the BoS frame was only used with the basic couch. After that, we've stacked the snout to the BoS frame as much as possible, and measured the distance of snout. We've also measured the airgap, based on the gap of that snout distance; and we've proceeded the normalization based on each dose (100% of each dose), after that, we've conducted the comparative analysis of lateral penumbra. Moreover, we've established the treatment plan according to the changed airgap which has been transformed to the Raystation 5.0 proton therapy planning system, and we've conducted the comparative analysis of DVH(Dose Volume Histogram). Results : When comparing the result before using the in-house Bos frame fixation tool which was manufactured for each beam angle with the result after using the fixation tool, we could figure out that airgap than when not used in accordance with the use of the in-house Bos frame fixation tool was reduced by 5.4 cm ~ 15.4 cm, respectively angle. The reduced snout distance means the airgap. Lateral Penumbra could reduce left, right, 0.1 cm ~ 0.4 cm by an angle in accordance with decreasing the airgap while using each beam angle in-house Bos frame fixation tool. Due to the reduced lateral penumbra, Lt.eyeball, Lt.lens, Lt. hippocampus, Lt. cochlea, Rt. eyeball, Rt. lens, Rt. cochlea, Rt. hippocampus, stem that can be seen that the dose is decreased by 0 CGE ~ 4.4 CGE. Conclusion : It was possible to reduced the airgap by using our in-house Bos frame fixation tool for the proton therapy; as a result, it was possible to figure out that the lateral penumbra reduced. Moreover, it was also possible to check through the comparative analysis of the treatment plan that when we reduce the lateral penumbra, the reduction of the unnecessary irradiation for the normal tissues. Therefore, Using the posterior oblique the Brain cancer proton therapy should be preceded by decreasing the airgap, by using our in-house Bos frame fixation tool; also, the continuous efforts for reducing the airgap as much as possible for the proton therapy of other area will be necessary as well.

• Korean Journal of Ichthyology
• /
• v.27 no.1
• /
• pp.45-49
• /
• 2015

A single specimen (192 cm total length, TL) of the Pacific sleeper shark, Somniosus pacificus, belonging to the family Somniosidae, order Squaliformes, was firstly collected from the west margin of the East Sea, Korea in February 2008. This specimen was characterized by having interdorsal space, being less than the distance between the snout and first gill opening; and the distance between the snout and first dorsal fin origin more than 45% TL; head and body has overall dark brownish. The new Korean name "Jam-sang-eo-gwa" is proposed for the family Somniosidae, and "Jam-sang-eo-sok" for the genus Somniosus, and "Jat-bit-jam-sang-eo" for the species S. pacificus.

• Journal of Marine Life Science
• /
• v.1 no.1
• /
• pp.8-17
• /
• 2016

The family Pristiophoridae belonging to the order Pristiophoriformes consists of about 8 species and 2 genera in the world. Among them, only one species (Pristiophorus japonicus) is distributed in northwestern Pacific. The family is characterized by having an elongated and flattened rostrum with laterally projecting a low of sharp teeth. In order to clarify variability of local populations of P. japonicus, we investigated 16 individuals collected from four locations (Korea, n=6; Miyagi, n=1; Kochi Pref., n=1; Okinawa, n=8) for morphological and molecular analyses. Morphological analysis showed that there may exist three morphotypes, of which A morphotype (Korea, Miyagi, Kochi Pref.) has a short snout (26.8% of TL), being most similar to syntypes of P. japonicus. On the other hand, B morphotype (Okinawa) has a long (31.7% of TL) and wider snout (snout width at nostrils 5.2 times pre-oral length) and, C morphotype (Okinawa) has a long (31.7% of TL) and narrower snout (6.3 times). Molecular analysis using mitochondrial DNA cytochrome b DNA sequences (386 base pairs) showed that the K2P distance between A and C morphotypes were 2.1~2.7%, but those within A morphotype were 0.0~0.5%. We identified A morphotype as P. japonicus, and designated B and C morphotypes as Pristiophorus sp. 1 and Pristiophorus sp. 2, respectively. Further studies are required to elucidate the taxonomic status of two morphotypes of the sawshark in Okinawa.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.149-155
• /
• 2012

Purpose: Long Extension (LE) is used in proton therapy for lung and abdomen. However, it has limitations in surface area, produces collision in posterior oblique beam which creates limitations in various gantry angles in planning therapy and increases air gap (distance between patient and compensator). Therefore, this study investigates the usability of manufactured Rounded Extension (RE) in comparison to LE to use the most suitable extension in proton therapy. Materials and Methods: To compare structural features of LE and RE. This study investigated usable gantry angle for snout sizes 100, 180 and 250 and CT scanned Humanoid phantom. And it compared the air gap in posterior oblique direction. Results: The structural features of two extensions are as follow. Because of the existence of supporting bar, the width of LE was 40 cm and RE was 50 cm. Result of the investigation of usable gantry angle for snout sizes 100, 180 and 250 are as follow. LE is ${\pm}36$ (average) at 180 degree and RE is ${\pm}70$ (average). And also, the air gap of RE is decreased by 11.3 cm in average at the same gantry angle. Conclusion: Manufactured RE for proton therapy has several benefits than LE. Its therapy surface area is wider and range of usable gantry angle is also wider. Also, the air gap at the posterior oblique beam has decreased. Therefore the usability of RE in proton therapy of lung and abdomen will be increased compared to LE. However, the air gap of proton therapy at the lateral direction may be increased, so there may be need for make up to decrease air gap at the lateral direction in the future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.179-188
• /
• 1981

The authors made an investigation concerning the geographical distribution and some major differentiations in morphological characteristics associated with the each habitat, of the pond smelt, Hypomesus olidus, which was introduced into Korea more than 50 years ago. Major characteristics utilized for the comparison study were upper jaw (maxillary), number of fin rays, scale structure, vertebral count, number of pyloric caeca, number of gill rakers, and the relative measurements of these and other internal characters. 1. The main areas of natural distribution are Paro Lake, Soyang Lake, Han River, Euirim Lake, and Ogjeong Lake (or Unam Lake) and the tributaries of these waters. 2. Morphological variations varied when the mean values of measurements from each area were compared with the standard measurement value by mosaic comparison, and in some instances a significant variation was found. 3. The most significant variations were found in the number of fin rays of pectoral and anal fins; the lengths from the tip of snout to the origin of pectoral fin, from snout to ventral fin, and from snout to anal fin, relative to standard body length; eye depth relative to head length; upper jaw: the number of pyloric caeca and the scale structure. Variations, on the other hand, by each habitat were not clear in the numbers of ventral and dorsal fin rays, gill rakers, vertebrae and lateral line scale : and the depth of caudal peduncle and distance from the tip of snout to the origin of dorsal fin relative to standard body length. 4. The scales of pond smelt showed some differences in the shape of scales, the shape and position of the focus and the number of ridges according to the scale positions on the body. No radii were present. The relations between longitudinal and transverse diameters of the scale suggest that the pond smelts of Soyang Lake and Un-am Lake are closely related, and those of Han River and Euirim Lake are also closely related. 5. The geographical variations in morphology of the pond smelt seem to have resulted from the variations in turbidity, water temperature, salinity (rather conductivity) and currents. 6. From the results obtained, it may be concluded that such factors as supramaxillary, relation between scale length and its breadth, number of caudal vertebrae and eye depth relative to head length may be used as the key characters for the classification of geographical varieties of Pond smelt.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.2
• /
• pp.189-194
• /
• 2022

Unidentified postflexion larva (18.57 mm in standard length, SL), belonging to the family Synodontidae was collected from Jeju Island, Korea, in November 2019. Molecular analysis revealed that the unidentified larva was identical to Synodus kaianus adults in mtDNA cytochrome c oxidase subunit I region (Kimura-2-parameter distance, d= 0.006), and was different from the close species S. macrops (d=0.220). The postflexion larva of S. kaianus has the following morphological features: regularly distributed seven peritoneal pigment spots along the alimentary canal; and, intensively distributed stellate melanophores at the middle of the base of caudal fin and behind the last anal fin ray. The postflexion larva of S. kaianus differed from that of S. macrops in snout length and size of peritoneal pigment spots. This is the first record of S. kaianus in Korea, and we suggest the Korean name "Ka-i-ya-kkoch-dong-myeol" for S. kaianus, according to Lee et al. (1999).

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.192-194
• /
• 2002

We present the results on the calibration of iso-center positions using the quality assurance system established at PMRC for determination of center position in X-ray and proton irradiation fields. Details on the system are presented in another presentation in this session. The equipment in the system is mounted on a patient treatment bed in each proton exposure room, G1 or G2. A center of a stainless ball on the equipment is set at a cross of laser markers located around the iso-center and fixed on the room and on the snout in the gantry. A proton beam or an X-ray beam is exposed onto the ball through a brass collimator of 100 mm ${\times}$ 100 mm and projected onto the imaging plate set at I cm behind the ball. On the axis perpendicular to the thrust axis of the gantry on the imaging plate, a distance between a center of the collimator image and a center of the ball image varies as a cosine function of gantry angles unless the ball is set on the iso-center. An amplitude of the cosine curve shows the distance between the ball and the iso-center, an offset the offset of the collimator, and a phase shift at a zero crossing point the ball direction viewed from the iso-center. We present the relation among the iso-center position, the laser maker position, and the center of proton and X-ray irradiation fields. Its stability and its reproducibility are discussed.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.57-65
• /
• 2007

A new species of the rajid genus Okamejei is described from a single specimen (295 mm TL) from off Shantou, Gwangdong in the South China Sea. The new species differs from all other congeners in the following combination of characters: snout pointed, dorsal head length 6.7 times interorbital width, tail moderately wide and long, its length 48.5% TL, interdorsal distance less than length of first dorsal fin base, postdorsal tail short as 5.8% TL, small evenly distributed dark brownish spots, without ocelli on dorsal surface of disc, pores of ampullae of Lorenzini on ventral surface distributed from snout tip to distal end of metapterygium, scapulocoracoid high, its height about 1.4 times rear corner height, trunk vertebrae 23, predorsal tail vertebrae 50 and pectoral fin radials 96.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.132-138
• /
• 1984

The genus Squalidus of Korea, formerly regarded as genus Gnathopogon is reviewed and keys to following 4 species and subspecies: S. gracilis majimae, S. chankaensis tsuchigae, S. chankaensis ssp., and S. japonicus coreanus. The genus spualidus is distinguished from genus Gnathopogon by the position of snout, color pattern on the body sides, number of scales above lateral line, and distance from anus to anal finorgin. G. majimae Jordan et Hubbs is junior synonym of S. gracilis majimae, and G. coreanus (not Berg) is splitted and identified as S. chankaensis tsuchigae, S. c. ssp., and S. japonicus coreanus. S. c. tsuchigae is very similar to S. j. coreanus, but the eye diameter, barbel length, and the number of lateral line scales are useful characters in separating these species. S. thankaensis ssp. occurring only in the Yongdok-Oship River differs from S. chankaensis tsuchigae in the number of lateral line scales, eye diameter and their body size.

• Korean Journal of Ichthyology
• /
• v.25 no.4
• /
• pp.222-226
• /
• 2013

As Carangoides ferdau was previously reported based on its underwater photograph, morphological descriptions have been incomplete up to the presence in Korea. On the base of two samples collected at the coast of Jeju island, morphological characters of C. ferdau are described in detail. This species is characterized by having the forepart of second dorsal fin much prolonged, 7~8 transverse dark bands on body, and snout length almost equal to eye diameter. It is morphologically very similar to C. orthogroammus, but is easily distinguished in having transverse dark bands instead of yellow spot on the body of C. orthogroammus. Phylogenetic relationships based on the mitochondrial cytochrome b (1,141 base pairs) sequences shows that C. ferdau is closely related to C. orthogroammus, and C. dinema also has a sister group relationship with C. ablongus. Both genetic distances (p-distances) are 8.2%, respectively.