• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.227-229
• /
• 2006

3차원 실장을 하기 위해서 딥핑 방법으로 전기적 신호를 전달할 수 있는 비아를 가진 실리콘 웨이퍼를 제작하였다. 레이저를 이용하여 실리콘 웨이퍼에 개구부가 원형에 가까운 관통 홀을 형성하였다. 관통 홀의 벽에 도금 방법으로 시드 층을 형성하였다. 관통 홀의 충전 금속은 Sn-3.5Ag-0.7Cu 솔더를 사용하였다. 딥핑 방법으로 시드 층과 솔더 사이의 확산 현상 이용하여 전기적 신호를 전달 할 수 있는 비아를 형성하였다. 비아 내부에 일부 기공과 크랙이 발견되기도 했으나 딥핑 방법을 통해서 빠른 시간 내에 비아를 가진 실리콘 웨이퍼를 제작 할 수 있었다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.157-162
• /
• 2010

This paper describes the thermal fatigue life prediction models for 95.5Sn-4.0Ag-0.5Cu solder joints of Flip chip package considering Under Bump Metallurgy(UBM). A 3D Finite element slice model was used to simulate the viscoplastic behavior of the solder. For two types of solder bump pitches, simulations were analyzed and the effects of underfill packages were studied. Consequently, it was found out that solder joints with underfill had much better fatigue life than solder joints without underfill, and solder joints with $300{\mu}m$ bump pitch had a longer thermal fatigue life than solder joints with $150{\mu}m$ bump pitch. Through the simulations, flip chip with lead-free solder joints should be designed with underfill and a longer bump pitch.

• Journal of the Korean institute of surface engineering
• /
• v.24 no.1
• /
• pp.25-30
• /
• 1991

The evaporation characteristics of Ag, Al, Au, Cr. Cu, In, Mg, Mn, Pb, Pd, Si, SiO, Sn, Ti and Zn with the various resistive heating sources have been studied. The employed sources are refractory metal (Mo, Ta and W) boats, W-wire, ceramic (usually Al2O3)-coated and -barriered refractory metal boats, and special boats such as baffled boats and intermetallic boats (nitride compound and graphite). We investigated the melting mode, evaporation rate at a specific power, and lifetime of the sources. A special boat holder is also discussed which is needed to cool the sources at a large heat capacity.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.298-301
• /
• 2004

European Union Member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain mercury, cadmium, lead, hexavalent chromium, polybrominated biphenyls(PBB) or polybrominated diphenyl ethers(PBDE) (by Directive 2002/95/EC of The European Parliament and the Council of 27 january, 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ). So, It is important to develop lead free solder and to assure the reliability of appliance. But lead free solder(i.e. Sn-3Ag-0.5Cu) have some problems such as lift off, whisker, migration and crack, etc. In this paper we discuss the reliability assurance method in lead free solder and appliance.

• Journal of Welding and Joining
• /
• v.31 no.3
• /
• pp.22-30
• /
• 2013

Due to ELV banning, automotive electronics cannot use four kinds of heavy metal element (Pb, Hg, Cd, $Cr^{6+}$) from 2016. Therefore, this study was focused on degradation characteristics of Sn-3.0Ag-0.5Cu Lead-free solder joint with OSP and ENIG finsh under various reliability assessment method, as like to thermal shock test and high temeprature/high humidity test with test duration for cabin electronics. Also, we compared bonding strength degradation to other advanced research results of electronic control unit for engine room because of difference service temperature with mount location in automotive. Whisker growth phenomenon and mitigation method which were essentially consideration items for Pb-free car electronics were examined. Conformal coating is a strong candidate for mitigating whisker growth in automotive electronics. Necessary condition to adapt Pb-free in car electronics was shown.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.86.1-86.1
• /
• 2012

나노재료와 나노기술의 연구개발 지원을 위하여 국가나노인프라인 나노종합팹센터에서 개발되고 있는 나노재료/나노현상의 실시간 관찰을 위한 SiN membrane chip 기술 및 나노그래핀 기반구축에 대한 최근 결과와 향후계획을 소개하고자 한다. 나노재료의 합성, 배열, 구조 등의 실시간 관찰을 가능하게 하기 위하여 제작된SiN membrane chip은 투과전자현미경(transmission electron microscope, TEM)에서 투명한 기판으로, 그 위에 나노재료를 합성, 배열하고 원하는 모양의 전극을 형성하여 나노재료 및 나노소자의 온도변화 및 전기적 특성 측정 등이 가능하다. 이러한 기술은 Ag, Sn, Cu 등 nano-cluster의 percolation 소자, SiN 및 Graphene 나노기공 소자, SiGe, BiTe, Si, ZnO 나노선 및 CNT의 내부구조변화, 상변화 등 다양한 나노재료/나노소자의 나노현상 관찰 및 해석에 적용되었다.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.340-343
• /
• 2013

A novel bumping process using solder bump maker is developed for the maskless low-volume solder on pad (SoP) technology of fine-pitch flip chip bonding. The process includes two main steps: one is the aggregation of powdered solder on the metal pads on a substrate via an increase in temperature, and the other is the reflow of the deposited powder to form a low-volume SoP. Since the surface tension that exists when the solder is below its melting point is the major driving force of the solder deposit, only a small quantity of powdered solder adjacent to the pads can join the aggregation process to obtain a uniform, low-volume SoP array on the substrate, regardless of the pad configurations. Through this process, an SoP array on an organic substrate with a pitch of $130{\mu}m$ is successfully formed.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.7-13
• /
• 2019

Power module is getting attention from electronic industries such as solar cell, battery and electric vehicles. Transient liquid phase (TLP) boding, sintering with Ag and Cu powders and wire bonding are applied to power module packaging. Sintering is a popular process but it has some disadvantages such as high cost, complex procedures and long bonding time. Meanwhile, TLP bonding has lower bonding temperature, cost effectiveness and less porosity. However, it also needs to improve ductility of the intermetallic compounds (IMCs) at the joint. Wire boding is also an important interconnection process between semiconductor chip and metal lead for direct bonded copper (DBC). In this study, TLP bonding using Sn-based solders and wire bonding process for power electronics packaging are described.

• YAKHAK HOEJI
• /
• v.45 no.5
• /
• pp.448-454
• /
• 2001

The contents of heavy metals in boiled Sibjeonaebotang with those in its herbal ingredients are compared. The herbal medicines of Sibjeonaebotang were bought at 10 defferent markets. The contents of 14 heavy metals (Ag, As, Ba, Cd, Cr Cu, Fe, Hg, Mn, Ni, Pb, Sb, Sn, Zn) were analysed using ICP It was found out that 5 heavy metals (Pb, As, Ba, Fe, Sb) were detected in only one boiled Sibjeonaebotang But they were detectable in all Sibjeonaebotang and its herbal before boiling. For example the content of Hg in one pack of Sibjeonaebotang before boiling was 0.064$\pm$0.016 me and Hg in boiled one was 0.002$\pm$0.005mg. These results suggest that boiled Sibjeonaebotang which we take is less harmful than herbal medicine itself by heavy metals.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.4
• /
• pp.215-219
• /
• 2009

A packaging technology based on flip-chip bonding and Pb-free solder for silicon pressure sensors on printed circuit board (PCB) is presented. First, the bump formation process was conducted by Pb-free solder. Ag-Sn-Cu solder and the pressed-screen printing method were used to fabricate solder bumps. The fabricated solder bumps had $189-223{\mu}m$ width, $120-160{\mu}m$ thickness, and 5.4-6.9 standard deviation. Also, shear tests was conducted to measure the bump shear strength by a Dage 2400 PC shear tester; the average shear strength was 74 g at 0.125 mm/s of test speed and $5{\mu}m$ shear height. Then, silicon pressure sensor packaging was implemented using the Pb-free solder and bump formation process. The characteristics of the pressure sensor were analogous to the results obtained when the pressure sensor dice are assembled and packaged using the standard wire-bonding technique.