• Asian Pacific Journal of Cancer Prevention
• /
• 제15권4호
• /
• pp.1831-1835
• /
• 2014

Background: To investigate the relationship between extracellular matrix parameters and texture of prostatic lesions evaluated by transrectal real-time tissue elastography (TRTE). Methods: 120 patients suspicious for prostate cancer underwent TRTE. Targeted biopsies were carried out after 12-core systematic biopsy. Epithelia were stained with hematoxylin-eosin, and Victoria blue and Ponceau S were used to stain elastic-collagen fibers, and picric acid-sirius red for visualization of collagen type I (Col1) and III (Col3). Smooth muscles were visualized by immunohistochemistry. All image analyses were performed in a blind manner using Image Pro Plus 6.0, and the area ratios of epithelium, elastic fibers, collagen fibers and Col1/Col3 were determined. Results: 42 patients with typical elastograms were included in the final data analysis. Significant differences were detected between the benign and malignant groups in the area ratios of epithelium (P = 0.01), smooth muscles and Col1/Col3 (P = 0.04, P = 0.02, respectively). There were no significant differences in the area ratios of epithelium, smooth muscle and elastic fibers between the stiff and soft lesion groups. The area ratio of Col1 was ($0.05{\pm}0.03$) in the stiff group, and ($0.02{\pm}0.01$) in the soft group (P= 0.00). However, the area ratio of Col3 was ($0.03{\pm}0.02$) in the stiff group, and ($0.05{\pm}0.04$) in the soft group (P = 0.16). Col1/Col3 in the stiff group ($1.99{\pm}1.59$) was greater than in the soft group ($0.71{\pm}0.64$) (P = 0.01). Conclusions: Tissue hardness of prostatic tumors was mainly dependent on the Col1 content, Col1/Col3 being higher in malignant than in benign lesions, so the prostate tissue texture can be used as a target for distinguishing between the two with TRTE.

• 대한조선학회논문집
• /
• 제46권1호
• /
• pp.1-9
• /
• 2009

Three-dimensional characteristics of fluid flow and heat transfer around a wavy circular cylinder having sinusoidal variation in cross sectional area along the spanwise direction are numerically investigated using the immersed boundary method. The three different wavelengths of ${\pi}4$, ${\pi}3$ and ${\pi}2$ at the fixed wavy amplitude of 0.1 have been considered to investigate the effects of waviness especially on the forced convection heat transfer around a wavy cylinder when the Reynolds and Prandtl numbers are 300 and 0.71, respectively. The present computational results for a wavy cylinder are compared with those for a smooth cylinder. The time- and total surface-averaged Nusselt number for a wavy cylinder with ${\lambda}={\pi}/2$ is larger than that for a smooth cylinder, whereas that with ${\lambda}={\pi}/4$ and ${\pi}/3$ is smaller than that for a smooth cylinder. However, because the surface area exposed to heat transfer for a wavy cylinder is larger than that for a smooth cylinder, the total heat transfer rate for a wavy cylinder with different wavelengths of ${\lambda}={\pi}/4$, ${\pi}/3$ and ${\pi}/2$ is larger than that for a smooth cylinder.

• 정보처리학회논문지B
• /
• 제12B권3호
• /
• pp.223-232
• /
• 2005

본 논문에서는 블록 기반으로 부호화된 영상에 대하여 블록 경계 영역 특성에 따른 적응적 필터링을 이용한 양자화 잡음 제거 알고리즘을 제안하였다 제안한 방법에서는 블록 경계에 인접한 네 개 화소들의 통계적 특성을 이용하여 각 블록 경계 영역을 평탄 부영역(smooth sub-region)과 복잡 부영역(complex sub-region)으로 분류한 후, 인접 블록간 영역 특성을 이용하여 서로 다른 블록간 필터링을 수행한다. 먼저 인접 블록 모두 평탄 부영역인 경우에는 평탄 블록 경계 영역 중 블록화 현상이 발생하지 않은 영역도 존재하기 때문에 계산량을 줄이기 위하여 평탄 영역 중 블록화 현상이 발생한 영역만을 검출하여 필터링을 수행한다. 그리고, 두 부영역이 서로 다른 부영역인 경우에 대하여서는 기존의 방법들과는 달리 실제 에지 성분을 보존하면서 블록화 현상과 에지 주위에서 발생하는 링잉 현상을 동시에 제거하기 위하여 인접 블록의 영역 특성에 따라 적응적으로 일차원 필터링을 수행한다. 두 부영역이 모두 복잡 부영역일 경우에는 블록화 현상을 제거하면서 실제 에지를 보존하기 위하여 블록화 강도 및 양자화 파라미터에 따라 블록 경계 영역의 두 화소에 대하여 필터링을 수행한다. 모의실험 결과를 통하여 제안한 방법이 객관적 화질 및 주관적 화질 측면에서 기존의 방법보다 그 성능이 우수함을 확인하였다.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.743-752
• /
• 1998

Experiments were performed to characterize single-phase heat transfer behavior of submerged liquid jet with multiple nozzle normally impinging on the smooth and extended surfaces. Arrays of 9 and 36 nozzles were used, with diameters of 0.5 to 2.0mm providing nozzle area ratio (AR) from 0.05 to 0.2. The square pin fin arrays were chosen as extended surfaces and the effects of geometrical parameters such as fin height, the ratio of fin width to channel width on heat transfer enhancement were examined. Single nozzle characteristics were also evaluated for comparison. The results clearly showed that heat transfer enhancement could be realized by using multiple nozzles at the constant volume flow rate. The average Nusselt number of multiple nozzle impingement on the smooth surface was correlated by the following equation : Nu/$Pr\frac{1}{3}=0.94 Re^{0.56}N^{-0.12}AR^{0.50}$The average heat transfer coefficients of multiple nozzle impingement on the extended surfaces decreased with increasing fin height and the ratio of fin width to channel width. The effectiveness of ex-tended surfaces ranged from 1.5 to 3.5 depending on the fin height, the ratio of fin width to channel width of pin fin arrays, nozzle number and nozzle area ratio.

• Structural Engineering and Mechanics
• /
• 제42권1호
• /
• pp.121-129
• /
• 2012

All contemporary seismic Codes have adopted smooth design acceleration response spectra, which have derived by statistical analysis of many elastic response spectra of natural accelerograms. The above smooth design spectra are characterized by two main branches, an horizontal branch that is 2.5 times higher than the peak ground acceleration, and a declining parabolic branch. According to Eurocode EN/1998, the period range of the horizontal, flat branch is extended from 0.1 s, for rock soils, up to 0.8 s for softer ones. However, from many natural recorded accelerograms of important earthquakes, the real spectral amplification factor appears to be much higher than 2.5 and this means that the spectrum leads to an unsafe seismic design of the structures. This point is an issue open to question and it is the object of the present study. In the present paper, the spectral amplification factor of the smooth design acceleration spectra is re-calculated on the grounds of a known "reliability index" for a desired probability of exceedance. As a pilot scheme, the seismic area of Greece is chosen, as it is the most seismically hazardous area in Europe. The accelerograms of the 82 most important earthquakes, which have occurred in Greece during the last 38 years, are used. The soil categories are taken into account according to EN/1998. The results that have been concluded from these data are compared with the results obtained from other strong earthquakes reported in the World literature.

• 한국게임학회 논문지
• /
• 제3권2호
• /
• pp.30-34
• /
• 2003

Image-based rendering is an approach to generate realistic images in real-time without modeling explicit 3D geometry, Especially, TIP(Tour Into the Picture) is preferred for its simplicity in constructing 3D background scene. However, TP has a limitation that a viewpoint cannot go far from the origin of the TIP for the lack of geometrical information. in this paper, we propose a method to interpolating the TIP images to generate smooth and realistic navigation. We construct multiple TIP models in a wide area of the virtual environment. Then we interpolate foreground objects and background object respectively to generate smooth navigation results.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권3호
• /
• pp.57-62
• /
• 2001

Falling film heat transfer analyses with aqueous lithium bromide solution were performed to investigate the transfer characteristics of the copper tubes. Finned (knurled) tube and a smooth tube were selected as test specimens. Averaged generation fluxes of water and the heat flux were obtained. As the film flow rate of the solution increased, the generation fluxes of water decreased for both tubes due to the fact that the heat transfer resistance increased with the film thickness. The effect of the enlarged surface area at the knurled tube was supposed to be dominant at a small flow rate. The generation fluxes of water increased with the increasing degree of tube wall superheat. Nucleate boiling is supposed to occur at a wall superheat of 20K for a smooth tube, and at 10K for a knurled tube. The increased performance of the knurled tube was supposed to mainly come from the effect of the increased heating surface area.

• 한국환경복원기술학회지
• /
• 제16권2호
• /
• pp.53-61
• /
• 2013

The present study elucidated the growth properties of Sasa borealis communities distributed in the lower layer of deciduous broadleaf forests in temperate zones and analyzed the correlation between the growth properties of S. borealis and positional environmental factors. The higher the culm height of S. borealis was, the higher the values of the leaf number, leaf area, and foliage layer thickness became. This might be because as the culm height of S. borealis increased, the acquisition of light sources became easier so that the biomass of leaves increased simultaneously for smooth anabolism. S. borealis seem to change their growth mode for smooth acquisition of light resources. The culm density of S. borealis and the leaf number, leaf area and foliage layer thickness of S. borealis did not show any clear correlation. The values of the culm height, leaf number, leaf area, and foliage layer thickness of S. borealis as the above altitude of the location of S. borealis increased. It seems like that growth conditions such as temperatures and winds are deteriorated as the above altitude of the location of S. borealis increased so that S. borealis becomes smaller. No clear correlations were shown between the physiochemical properties of soil and S. borealis' growth properties. It seems like that the growth of S. borealis complexly intertwined with diverse environmental factors and that due to the physiological integration of S. borealis, certain physiochemical properties do not unilaterally affect S. borealis' growth properties.

• Journal of Chest Surgery
• /
• 제31권4호
• /
• pp.422-426
• /
• 1998

53 세 남자가 하부 식도에서 발생한 거대한 용종성 종괴에 의한 연하곤란을 주소로 내원하여 식도 절제술과 식도-위 문합술을 시행하였다. 현미경소견상 기저세포양 편평세포암과 연골 분화가 여러 곳에서 관찰되는 연골육종이 혼재하는 진성암육종이었다. 위장주위 임파절과 기도분기부하 임파절에 편평세포암이 전이되어 있었다. 면역조직화학적 검사상 편평세포 지역은 cytokeratin 에 강한 양성이었고 기저세포양 지역은 고분자량 cytokeratin 에 양성이었다. 방추세포육종은 vimentin 과 smooth muscle actin 에 양성이었고 연골육종 지역은 vimentin 과 S-100 단백질에 양성이었다. 술후 항암제 치료와 방사선 치료의 보조병용요법을 시행하였으며 술후 11 개월인 현재까지 재발의 소견 없이 정상 식사를 하고 있다.

• 한국항해학회지
• /
• 제15권2호
• /
• pp.61-86
• /
• 1991

This paper aims to investigated the reasonable objectiveness of trading areas on the Korea Ship Safety Act and to make a regulated proposal of trading areas. To achieve the above mentioned object, we analyzed the existing rules and other related circumstances of maritime fields. On the basis of this viewpoint, this paper was focused on three topics of concern : (1) the relationship between the ship Safety Act and other Maritime Acts. (2) the legislative examples of foreign countries, (3) the reasonable revised reasons of trading areas. In this paper, we proposed following four matters such as (1) the modification of ship's length and speed which are the designative basis of trading areas, (2) the extension of the smooth sea area to limit of territorial seas (3) the extension of the near-coastal area to the coasts of the P.R.C., Japan, the U.S.S.R and the R.O.C ., and rename of its area into the near & greater coastal area, (4) the annulment of greater-coastal area.