• 한국농촌건축학회논문집
• /
• 제4권2호
• /
• pp.1-11
• /
• 2002

The integrated school has an expectation of the total education environment in which has some problems as regional, emotional, teaching treatment, establishment equipment part because of the based relative establishments are abolished. The expectations are the educating effective rising, the reduce of the responsibility of the teacher, a smooth teacher placing and saving the educating estimate. As the new education course propulsion is raising the school and students discretion and expanding the way of educating, being close to the course of studies, the integrated operation is earnestly needed and such as these versatile background the small schools will keep on getting integrated. So, in this paper I'll object the need and purpose of the integrate operation and show the integrated schools that are now in use. Investigate about actual condition of the integrated school, so after these research I've concluded these things below about the integrated school operating.

• 설비공학논문집
• /
• 제4권4호
• /
• pp.289-298
• /
• 1992

Fouling is "a major unsolved" area in heat transfer research. Currently, fouling researches are performed in every directions-fundamental aspects, modeling and cumulating experimental data. In this study, an attempt was made to extend the knowledge in enhanced tube fouling. The Kern-Seaton fouling model which was originally proposed for smooth tube fouling was extended to repeated rib tubes. Key parameters-mass transfer coefficient and wall shear stress-were modeled for repeated rib tubes. Some critical points related with the enhanced tube fouling-uncertainties in the mass transfer rate, wall shear stress modeling, deformation of roughness shape during fouling-were discussed, and some quantitative evaluations were made.

• 한국유체기계학회 논문집
• /
• 제6권3호
• /
• pp.15-20
• /
• 2003

For measuring friction factor of artificially-roughened surfaces which are usually applied to damper seals, flat plate test apparatus is designed and fabricated. The measurements of leakage flow and pressure distribution through round-hole patterned specimen with different hole areas are described, and a method is discussed for determining the friction factor experimentally. Results show that the friction factor of the round-hole patterned surface is bigger than that of smooth surface, and increases as increasing the hole area. A empirical friction factor model for the round-hole patterned surface can be descrived by the Moody's friction factor formula.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.892-896
• /
• 2005

In this paper, key issues of stainless steel foil substrates for display applications have been described. We studied and analyzed technical issues on substrate passivation/planarization to control surface roughness and capacitive coupling from conductive substrates. A thick (either multiple or single) passivation/planarization layer needs to be applied on the nonelectronic-grade stainless steel substrate to provide a smooth surface and electrical insulation from the conductive substrate. Especially for large size, high-resolution display applications, low k and thick passivation/planarization layers should be used for appropriate capacitive coupling. Based on our initial study, a unit area capacitance of less than $2nF/cm^2$ of passivation/planarization layers is needed for 32" HD TV OLED displays.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.28-34
• /
• 1998

This paper presents a new method for local obstacle avoidance of indoor mobile robots. The method combines a directional approach called the lane method and a velocity space approach. The lane method divides working area into lanes and then chooses the best lane to follow for efficient and collision-free movement. Then, the heading direction to enter and follow the best lane is decided, and translational and rotational velocity considering physical limitations of a mobile robot are determined. Since this method combines both the directional and velocity space method, it shows collision-free motion as well as smooth motion taking the dynamic of the robot into account.

• 복식문화연구
• /
• 제14권2호
• /
• pp.299-309
• /
• 2006

This study was intended to analyze the wearing practices and the subjective fabrics preferences for men's dress shirts. It was performed by means of convenience sampling survey of male office workers wearing dress shirts who were living in Seoul, Geonggi, and Chungcheong area. Collected data were analyzed by frequency analysis, cross-tabulation analysis, t-test, and ANOVA using SPSS. The results were as follows: Most of the male office workers owned 5 dress shirts, and blue color dress shirts were preferred to white one. It was shown that most of the respondents wore dress shirts at the office almost every day with necktie. The preferred sensations of the dress shirt fabrics were the soft, wrinkle-free, smooth and dry ones. There were partially significant differences according to gender and age of male office workers in the wearing practices and subjective fabrics preferences of dress shirts.

• 식물분류학회지
• /
• 제39권1호
• /
• pp.1-3
• /
• 2009

한국의 강원도에 위치한 석회암 산지인 덕항산에서 발견된 으아리속 자주종덩굴절의 1신종, 바위종 덩굴 (Clematis calcicola J. S. Kim)을 기재 및 도해하였다. 바위종덩굴은 엽연에 거치가 드물게 있고 털이 없는 가죽질의 잎과 두텁고 주름이 없는 꽃받침의 특징으로 자주종덩굴절의 다른 종들과 쉽게 구별된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.940-948
• /
• 2000

Noise and vibration generated at construction sites become serious issues because of bigger construction projects and growing use of heavy equipment. Especially in downtown construction, noise and vibration easily exceed the legal standards that can suffer the most of surrounding residents. The number of complaints by the residents who are exposed to the noise increases as their consciousness grows. However, the Korean regulations for the construction noise and vibration only present the overall limits for target areas and times zones, and this make it difficult to take effective measures. Also in rural area, disputes between construction sites and residents arise, but the dispute resolution or taking measures are difficult because clear standards concerning cause-and-effect, estimation of effective levels, calculation of damages, and future precautions and examples lack. This paper describes legal standards regarding the noise and vibration and presents judging standards for the physical damages. This paper also introduces example public complaints that happened at Daewoo construction sites to describe the problems in the existing law and further to enable smooth construction progresses by emphasizing the seriousness of public complaints.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.202-211
• /
• 2002

The basic concept of 'tooth profile modification' to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring, pitting and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We use the AGMA Standard to design basic gear profile. We also developed a gear design program using tooth profile modification.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.159-162
• /
• 2008

This paper presents a modified mean curvature diffusion filter to smooth speckle noise in images. Mean curvature diffusion filter has already shown good results in reducing noise in images while preserving fine details. In the mean curvature diffusion, the rate of smoothing is controlled by the local value of the diffusion coefficient chosen to be a function of the local image gradient magnitude. In this paper, the diffusion coefficient is modified to be controlled adaptively by local image surface slope and heterogeneity. The local surface slope contributes to preserving details (e.g.edges) in image and the local surface heterogeneity helps the smoothing filter consider the amount of noise in both edge and non-edge area. The proposed filter's performance is demonstrated by quantitative experiments using speckle noised aerial image and TerraSAR-X satellite image.