• 인터넷정보학회논문지
• /
• 제19권4호
• /
• pp.71-82
• /
• 2018

As the era of the $4^{th}$ industrial revolution began, it is possible to provide smart education by utilizing various new technologies. This paper included 6 steps to prove that the educational satisfaction of students' can be improved by applying the technology of the $4^{th}$ Industrial Revolution toward smart education. The first step is to review technologies of the $4^{th}$ industrial revolution that could enable smart education. The second step is to define areas that smart education should include by adopting technologies of the $4^{th}$ industrial revolution. The third step is to extract the keyword through literature review while the keyword can constitute the smart education for the defined areas. The fourth step is to present the research model by using the extracted keyword. The fifth step is to verify the proposed research model through questionnaires. The last step is to analyze the result of questionnaires to suggest better educational method. Consequentially, the purpose of this study is to verify the effectiveness of smart education by measuring students' expectation about smart education through questionnaire. As a result, students responded that the presented factors of smart education could maximize the effect of education by increasing the satisfaction of education. Therefore, it is necessary to utilize the technology of the $4^{th}$ Industrial revolution in the education field and apply the smart education method for better education.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.87-105
• /
• 2020

Purpose: This paper aims to propose a practical strategy for smart factories and a step-by-step quality strategy according to the maturity of smart factory construction. Methods: The characteristics, compositional requirements, and diagnosis system are examined for smart factories through theoretical considerations. Several cases of implementing smart factory are studied considering the company maturity level from the aspect of the smartness concept. And specific quality techniques and innovation activities are carefully reviewed. Results: The maturity level of smart factory was classified into five phases: 1) ICT non-application, 2) basic, 3) intermediate 1, 4) intermediate 2, 5) advanced level. A five-step quality strategy was established on the basis of case studies; identify, measure, analyze, optimize, and customize. Some quality techniques are introduced for step-by-step implementation of quality strategies. Conclusion: To build a successful smart factory, it is necessary to establish a quality strategy that suits the culture and size of the company. The quality management strategy proposed in this paper is expected to contribute to the establishment of appropriate strategies for the size and purpose of the company.

• Journal of Smart Tourism
• /
• 제3권4호
• /
• pp.23-31
• /
• 2023

This paper explores the concept of enhanced smart tourism as a response to the challenges and opportunities arising in the post-pandemic tourism landscape. The COVID-19 pandemic has not only halted the global tourism industry but also prompted a reevaluation of its sustainability, technological integration, and impact on local communities. The need for a paradigm shift in tourism is emphasized, focusing on digitalization, innovation, and resilience. Enhanced smart tourism is characterized by a shift from traditional practices to innovative governance models, increased emphasis on sustainability, and the integration of technology for better management and visitor experiences. The paper discusses the four pillars of enhanced smart tourism - Technology, Sustainability, Accessibility/Mobility, and Innovation/Creativity, and their expansion in the post-pandemic era. Furthermore, the significant role of data in smart tourism is examined, highlighting the importance of data valuation, management, and ethics. The paper proposes frameworks and methods for data valuation and emphasizes the necessity of a comprehensive approach to data within the smart tourism ecosystem. The conclusion points to the need for further empirical and conceptual research to fully realize the potential of enhanced smart tourism.

• 디지털산업정보학회논문지
• /
• 제14권4호
• /
• pp.189-204
• /
• 2018

The purpose of this study is to examine an organizational performance difference by individual utilization level of the smart work. The Smart work help minimizing business process and improving organization productivity based on information technology. This new technology provides a flexible way of the task through smart-work center, videoconferencing, telecommuting, mobile(remote control) and business-only messenger. This investment changes organizational culture, institutions and behavior by new technology applying. The organization system change due to smart work has trouble between alteration preferences and existing maintains a group. In response, the organization should make investment justification of smart work for institutional and culture stabilized by a new system in organization. I set up the analytical process of four stages for empirical research. It will analyze an operation difference of the smart work between pre and post investment in the first-step analysis. The two-step analysis will conduct a text mining analysis of smart work operations. The three-step analysis will identify organization performance differences among individual levels in smart work. The four-step analysis will identify a factor difference in organizational performance by individual utilization level on smart work. According to the study, It has been revealed a difference between the pre and post investment performance on smart work. The text mining analyses many appeared an improvement opinion of organizational culture. Next, there is a difference in organization performance among utilize groups of smart work. Furthermore, the factors of organizational performance among groups appeared differently. The theoretical contribution of this study provided to expand the organizational theory of organization change and resistance. The practical implications provided to require a strong guideline an organizational culture and institution for smart work.

• 한국해양공학회지
• /
• 제35권4호
• /
• pp.266-272
• /
• 2021

Mooring systems are among the most important elements employed to control the motion of floating offshore structures on the sea. Considering the use of polymer material, a new method is proposed to address the creep characteristics rather than the method of using a tension load cell for measuring the tension of the mooring line. This study uses a synthetic mooring rope made from a polymer material, which usually consists of three parts: center, eye, and splice, and which makes a joint for two successive ropes. We integrate the optical sensor into the synthetic mooring ropes to measure the rope tension. The different structure of the mooring line in the longitudinal direction can be used to measure the loads with the entire mooring configuration in series, which can be defined as SMART (Smart Mooring and Riser Truncation) mooring. To determine the characteristics of the basic SMART mooring, a SMART mooring with a diameter of 3 mm made of three different polymer materials is observed to change the wavelength that responds as the length changes. By performing the longitudinal tension experiment using three different SMART moorings, it was confirmed that there were linear wavelength changes in the response characteristics of the 3-mm-diameter SMART moorings. A 54-mm-diameter SMART mooring is produced to measure the response of longitudinal tension on the center, eye, and splice of the mooring, and a longitudinal tension of 100 t in step-by-step applied for the Maintained Test and Fatigue Cycle Test is conducted. By performing a longitudinal tension experiment, wavelength changes were detected in the center, eye, and splice position of the SMART moorings. The results obtained from each part of the installed sensors indicated a different strain measurement depending on the position of the SMART moorings. The variation of the strain measurement with the position was more than twice the result of the difference measurement, while the applied external load increased step-by-step. It appears that there is a correlation with an externally generated longitudinal tensional force depending on the cross-sectional area of each part of the SMART mooring.

• 재활복지공학회논문지
• /
• 제9권3호
• /
• pp.245-250
• /
• 2015

스마트 폰과 개인 휴대정보 단말기와 같은 장치는 일상생활에서 중요한 역할을 담당한다. 본 논문에서는 물리적 활동의 모니터링을 위해 신호벡터크기(signal vector magnitude)와 적응적인 임계값 처리에 기반한 걸음수 검출 알고리즘을 제안한다. 알고리즘은 스마트 폰에 내장된 가속도 센서와 중력 센서를 사용하여 걸음수를 측정한다. 실험결과 제안한 알고리즘이 스마트 폰의 어플에 비해 정확도와 적응성에서 좋은 성능을 나타내었다.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.321-326
• /
• 2023

The purpose of this study is to create and present a formalized module of ISP (Information Strategy Plan), a smart factory consulting method that is helpful to companies or consultants who will build smart factories. Order of study is First, the theoretical research direction is established through the investigation of related papers. Second, ISP policy research practices are compared to derive practical implementation methods. Third, in order to derive a standardized module method related to the final smart factory ISP, related cases of the government and individuals are compared. As a result of previous research, ISP (Information Strategy Planning), a consulting methodology, is similar to Deming's PDCA, and is regarded as Plan (environment and current status analysis), Do (establishment of future model goals), Check (establishment of implementation plan), and Act (follow-up management). As a result of the study, we obtained the following results. The first step is to analyze the current status and identify the purpose of introduction and problems in plant operation. In the second step, establish a consulting plan and derive a proposal description, strategic task, and master plan. Step 3 establishes detailed action plans, evaluates consulting outputs and consulting, and reports performance. Step 4 is established as follow-up management consulting. The limitation of the study is that although related data were compared to develop the consulting methodology into a standardized module, FGI analysis through experts or Delphi survey were not conducted, so there is a limit to the reliability of the mapping results.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.215-223
• /
• 2022

Objective: This study was to resolve the limitations of the experimental environment and to solve the shortcomings of the method of measuring human gait characteristics using optical measuring instruments. Design: A cross-sectional study. Methods: Fifteen healthy adults without a history of orthopedic surgery on the lower extremities for the past 6 months were participated. They were analyzed gait variables using the smart guide and the 3D image analysis at the same time, and their results were compared. Visual-3D was used to calculate the analysis variables. Results: The reliability and validity of the data according to the two measuring instruments were found to be very high; gait speed(0.85), cycle time(0.99), stride time of both feet(0.98, 0.97) stride legnth of both feet(0.86, 0.88) stride per minute of both feet(0.99, 0.96), foot speed of both feet(0.90, 0.91), step time of both feet(0.77, 0.71), step per minute(0.72, 0.74), stance time of both feet(0.96, 0.97), swing time of both feet(0.93, 0.79), double step time(0.81), initial double step time(0.84) and terminal step time(0.76). Conclusions: In the case of the smart insole, which measures human gait variables using the pressure sensor and inertial sensor inserted in the insole, the reliability and validity of the measured data were found to be very high. It can be used as a device to replace 3D image analysis when measuring pathological gait.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.22-23
• /
• 2011

본 논문은 Battery의 열화 특성을 반영한 순차적 Step Charge를 통한, Mobile 기기용 Li-Ion Smart Battery의 Life Cycle 개선기술을 제안 하고자 한다. 현재 기술수준의 Li-Ion 2차전지 수명은 표준충방전 300~500cycle 내외이나. 초기용량을 희생하지 않고도 Smart Battery 내부의 ASOC(Absolute State of Charge)와 연동하여 Battery 수명열화 곡선을 추종하는 최적화된 가변 충전전압을 순차적 Step Charge로 제공하여 Li-Ion 2차 전지의 수명열화를 개선하고, 열화 특성의 검토 및 개선효과 확인을 논문의 목적으로 한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권1호
• /
• pp.90-99
• /
• 2021

Recently, studies on wearable devices in ubiquitous computing environments have increased and the technology collecting user's activities to provide services has received great attention. We have compared the step counting methods according to sensor molding methods in case of counting steps by using the piezoelectric sensor. We have classified the cases which could result from the course of molding the internal module of a smart shoe as follows: (i) the module is unmolded, (ii) molded but only to the extent that a sensor is fixed or (iii) molded to the extent that a sensor is not moved. Moreover, we have made comparison to verify which algorithm should be used to increase the accuracy of counting steps by the respective cases. Based on the comparison result, we have confirmed that the accuracy of counting steps is higher when using gradient value rather than when using threshold value. In the case of no molding and small molding under the condition of using gradient value, it was turned out to be 100% accuracy for step counting.