• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.116-125
• /
• 2018

Color shade variation was investigated in zirconia dental blocks, prepared using commercial powders. As a reference color-shade block we used the color indexes of A2, A3.5, A4 and B3, according to the VITA classical color scale. The zirconia powders for color shade blocks showed colors of white, yellow, pink and grey, respectively, after firing at $1530^{\circ}C$. The zirconia powders were mixed according to the recipe of color shade blocks and shaped at lower pressure using a uniaxial hydrostatic press. The shaped sample was inserted into a vinyl pack and sealed in a vacuum form machine. The shaped block samples were reshaped at 450 bar using an isostatic cold press and fired at $1530^{\circ}C$ for three hours. In order to investigate the atmospheric color variation with firing temperature, the A2, A3.5, A4 and B3 sintered blocks were fired between $700^{\circ}C$ and $1300^{\circ}C$ under controlled atmosphere of $pN_2$ and $pO_2$. The surface color picture was taken using a smart phone camera and compared with the results obtained using the VITA classical color scale. Quantitative color index value, CIELAB, was measured using a color-meter. Above $800^{\circ}C$, the color darkness greatly increased with the increase of the reduction temperature and keeping time.

• Journal of the Korean housing association
• /
• v.27 no.5
• /
• pp.25-35
• /
• 2016

he objective of this study was to investigate home network systems presently applied in multi-housing complexes and resident's usage to improve the utilization of these systems and services as well as maintenance methods. Subjects were 27 housing complexes equipped with home network systems in west Pangyo area. The investigation methods of communal network systems were observed and photographed. Unit systems were investigated through photography, interviews, and observation focusing on the utilization of Wall-Pads by visiting one unit of each housing complex. The results are as follows: (1) Most housing complexes that we investigated were built with high-grade IT infrastructure. Also, remote meter reading, electronic security, vehicle access, and building access systems were established. Wall-Pads with similar functions were installed in 23 housing complexes, excluding private rental housing complexes. (2) Even though people were well aware of the need for common systems within their housing complexes, only 10~20% of Wall-Pad menus were used. (3) Low utilization rates of home network stem from Wall-Pad menus which were user-unfriendly, and a lack of user training for the complex's common system and unit system. Therefore, to promote active use of home network systems, the systems must be diversified in accordance with user characteristics. In addition, the Wall-Pad menus should be reorganized to be user-friendly.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.22 no.2
• /
• pp.106-110
• /
• 2011

Western classical singing voices are different from those of pop song singer's singing voices as well as traditional Korean singing such as Pansori. We anlalysed the singing voices from three different categories with using free application programs available at the usual smart phones : sound level meter and Spectral View Analyzer and fiberoptic rhinolaryngoscopic evaluation. The intensity of voice produced by a classical western singer was 11 dB louder than that produced by a pop song singer. Source sound, glottic sound, as well as harmonic sound and singing resonant sound (Singer's formant) are much more prominent. When evaluated under video-rhinolaryngoscopy during singing, the resonance cavity especially oropharyngeal cavity and hypopharyngeal cavity are widely opened during singing of the western classical singer than those of the traditional Korean singer's singing. Difference of singing methods including producing the glottal sound, respiration and resonance are discussed. Possible explanation of development of 'Singer's Formant' is discussed.

• Journal of the Korean Institute of Gas
• /
• v.23 no.5
• /
• pp.15-23
• /
• 2019

42.5% of domestic gas accident due to human factors, and 38% occurred in residential area. Also gas accident caused by deterioration / malfunction increased more than 2 times for last 1 year. In this study we developed IoT based gas safety platform service for Home-gas safety, which secured 99.32% of data transmit accuracy, monitoring and remote control through LPWA bidirectional communication.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.

• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.295-306
• /
• 2019

Shanghai Tower is a 632-meter super high-rise building located in an area with wind and active earthquake. A sophisticated structural health monitoring (SHM) system consisting of more than 400 sensors has been built to carry out a long-term monitoring for its operational safety. In this paper, a reduced-order model including 31 elements was generated from a full model of this super tall building. An iterative regularized matrix method was proposed to tune the system parameters, making the dynamic characteristic of the reduced-order model be consistent with those in the full model. The updating reduced-order model can be regarded as a benchmark model for further analysis. A long-term monitoring for structural dynamic characteristics of Shanghai Tower under different construction stages was also investigated. The identified results, including natural frequency and damping ratio, were discussed. Based on the data collected from the SHM system, the dynamic characteristics of the whole structure was investigated. Compared with the result of the finite element model, a good agreement can be observed. The result provides a valuable reference for examining the evolution of future dynamic characteristics of this super tall building.

• Journal of Korea Multimedia Society
• /
• v.22 no.3
• /
• pp.366-373
• /
• 2019

The development of monitoring and analysis systems to increase productivity while saving energy is needed as a method to reduce huge amount of energy consumed in the process of producing large forged products. In this paper, we propose a system to monitor and analyze energy usage in real-time collected from gas-meter, wattmeter, and thermometer based on IoT installed in forging factories. The system consists of a data collection server for collecting and processing data from IoT- based platform and existing SCADA equipment and ERP/MES system in forging factories, and an application server for providing services to users. To develop the system, the overall system structure is logically diagrammed, and the databases configuration and implementation modules to efficiently store and manage data are presented. In the future, the system will be utilized to reduce energy consumption by analyzing energy usage pattern and optimizing process works with real-time energy usage and production process data for each facility.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2021

The current settlement and distribution used in theme, background and signal music market other than conventional music is being carried out with either the comprehensive settlement method or the measured meter-rate settlement method in the payment process of collected user fees and compensation depending on the use-permission types. In this settlement and distribution process, however, the reliability issues are often being raised because of the difficulty of tracking rights due to changes in music source rights management information, etc, and the opaque settlement and distribution method itself. This paper proposes a new settlement and distribution platform using a blockchain for the reliable collection and distribution of copyright fees among music user group, monitoring organization group, trust organization group and copyright holders, based on the monitoring information of the theme, background and signal music usage. This platform also provides the transparency in settlement and distribution process among stakeholders through smart contract system.

• Korean Journal of Remote Sensing
• /
• v.37 no.1
• /
• pp.139-151
• /
• 2021

By the end of December 2020, an earthquake with Mw about 6.4 hit Sisak-Moslavina County, Croatia. The town of Petrinja was the most affected region with major power outage and many buildings collapsed. The damage also affected neighbor countries such as Bosnia and Herzegovina and Slovenia. As a light of this devastating event, a deformation map due to this earthquake could be generated by using remote sensing imagery from Sentinel-1 SAR data. InSAR could be used as deformation map but still affected with noise factor that could problematize the exact deformation value for further research. Thus in this study, 17 SAR data from Sentinel-1 satellite is used in order to generate the multi-temporal interferometry utilize Stanford Method for Persistent Scatterers (StaMPS). Mean deformation map that has been compensated from error factors such as atmospheric, topographic, temporal, and baseline errors are generated. Okada model then applied to the mean deformation result to generate the modeled earthquake, resulting the deformation is mostly dominated by strike-slip with 3 meter deformation as right lateral strike-slip. The Okada sources are having 11.63 km in length, 2.45 km in width, and 5.46 km in depth with the dip angle are about 84.47° and strike angle are about 142.88° from the north direction. The results from this modeling can be used as learning material to understand the seismic activity in the latest 2020 Petrinja, Croatia Earthquake.

• New & Renewable Energy
• /
• v.18 no.3
• /
• pp.32-42
• /
• 2022

Rapid spread of intermittent renewable energy has amplified the instability and uncertainty of power systems. The Korea Power Exchange (KPX) promoted efficient management by opening the power brokerage market in 2019. By combining small-scale intermittent renewable energy with a flexible facility through the power brokerage market, the KPX aims to develop a virtual power plant system that will allow the conversion of existing intermittent renewable energy into collective power plants. However, the participation rate of renewable power owners in the power brokerage market is relatively low because other markets such as the small solar power contract market or the Korea Electric Power Corporation power purchase agreement are more profitable. In this study, we used a choice experiment to determine the attributes affecting the participation rate in the power brokerage market for 113 renewable power owners and estimate the value of the power brokerage market. According to the estimation results, a low smart meter installation cost, low profit variations, long contract periods, and few clearances increased the probability of participation. Moreover, the average value of the power brokerage market was estimated to be 2.63 million KRW per power owner.