• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.1
• /
• pp.57-64
• /
• 2016

Pen-based interaction is universally available on smart devices and especially on Tablet PCs. Previous studies compared various input methods like fingers, a mouse or a stylus pen on PCs or on a touchscreen based devices such as smart phones. At the same time, various soft keyboard applications are being developed on application stores of smart devices. However, these previous studies did not suggest which one is a suitable keyboard application for Tablet PCs when users perform a certain interaction as input type. In this study, we compared two types of input methods (finger and pen) and three types of soft keyboard applications (QWERTY, Gesture and Swype) in a Tablet PC using performance measurements (accuracy and input speed) and discussed what types of applications showed better performance with each interaction on tablet PC. From these results, recommendations for the keyboard types depending on the input methods on tablet PCs were developed.

• Journal of International Academy of Physical Therapy Research
• /
• v.7 no.2
• /
• pp.1051-1055
• /
• 2016

The purpose of this study was to investigate the effect of the screen size of smart devices on the bending angle of the cervical spine. The subjects of this study were 30 healthy adults(15 men and 15 women) who used smartphones and tablet PC(personal computer). The changes in the bending angle of the upper and lower cervical spine were measured in the subjects after they had used a smartphone and a tablet PC for 300 seconds each. To make sure that all subjects began in the same starting position, an angle-measuring instrument was used to set the angles of the ankle, knee, hip, and arm joints to 90 degree. The subjects were asked to keep the trunk straight. They were asked to hold a smartphone in their hand and to bend their neck so that they could look down at the screen. Once they began using the smartphone in this manner, they were free to change their posture. We used a paired t-test to compare the bending angle of the cervical spine on subjects who used smartphones and tablet PC in the long-term and short-term there production error of cervical and the significance level was cervical. The results showed that, when using a smartphone and a tablet PC for 300 seconds, there was no significant difference in the bending angle of the upper cervical spine(p>.05), although there was a significant difference in the bending angle of the lower cervical spine(p<.05).

• Journal of Integrative Natural Science
• /
• v.11 no.3
• /
• pp.148-153
• /
• 2018

In this paper, we propose a hybrid-recognition system to obtain the state information and control the Internet of Things (IoT) based smart devices using two recognitions. First, we use a facial recognition for checking the owner of the mobile devices, i.e., smartphones, tablet PCs, and so on, and obtaining the state information of the IoT based smart devices, i.e., smart cars, smart appliance, and so on, and then we use a fingerprint recognition to control them. Further, in the conventional system, the message of the state and control information between the mobile devices and smart devices is only exchanged through the cellar mobile network. Thus, we also propose a direct communication to reduce the total transmission time. In addition, we develop a testbed of the proposed system using smartphones, desktop computers, and Arduino vehicle as one of the smart devices. We evaluate the total transmission time between the conventional and direct communications and show that the direct communication with the proposed system has better performance.

• Journal of Multimedia Information System
• /
• v.3 no.4
• /
• pp.111-118
• /
• 2016

Today, the proliferation of various mobile devices, such as smart phones and tablet PC, brought changes in the existing TV viewing behavior. People use smart devices as secondary device while watching TV. Researches on a wide range of services linked with second-screen devices around the smart TV in the home network have been actively conducted. While there exist several Web-related technologies for connections between devices, specialized techniques for a second screen service are quite insufficient. There are still some problems related to the display of contents from multiple devices and the efficient transfer of these contents. Considering the characteristics of broadcasting systems In this study, we focus on a second screen service that permits a dynamic transfer of contents by connecting a television (TV) with mobile devices. Here, we propose a second screen service model to enable the personalization of TV contents by combining the existing broadcasting and Web-related techniques.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.2
• /
• pp.157-168
• /
• 2014

In this paper, HSE (Health and Safety Environments) research with smart device and biometrics is conducted for the worker's HSE enhancement in the manufacturing shop floor. Today, various kinds of smart devices are popularized extensively. In addition, the wearable type devices are being introduced such as google glass very recently. Smart device of werable type is exptected to bring great opportunity out in terms of HSE functionality. Smart devices of phone or tablet type are being used for on-line work between control center and manufacturing shop floor by virtue of wireless communication. However, those devices are not appropriate for detecting of worker's physical senses such as temperature and pulse. In this paper, we developed a glass type smart device and required funictions for HSE enhancement with the investigation of biometrics technology. Also, required sensors are investigated for the detecting of temperature, pulse and noxious gasses. Smart device of glass type has advantages in that most senses of personnel are gathered around faces, and also it's possible to detect neutral axis of body because the wearing location is fixed. We expect that the proposing HSE product of glass type smart device could contribute the enhancement of the HSE of manufacturing shop floor.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.2
• /
• pp.96-100
• /
• 2012

Existing, widely used industrial controller programmable logic controller (PLC) using the high cost and maintenance was a difficult problem. In addition, the network configuration was not easy. Thus, the filter press by remote control and management to improve productivity and shorten maintenance time. Variety of smart devices (smart phones, iPad, tablet PC, etc.) Remote control is possible by utilizing the existing controlled by the PLC addresses maintenance and improved performance compared to that of possible filter press control and management system was developed.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.251-257
• /
• 2018

The purpose of this study is to analyze the satisfaction and requirements of users' devices after development of tablet based AAC(Augmentative and Alternatice Communication) application for Android. The purpose of this study is to evaluate the satisfaction and the requirement of tablet - based AAC application, Were assessed using the Korea Assistive Technology Assessment Tool (KAAT). As a result of satisfaction evaluation of tablet-based smart AAC device, all the items including device, service, and everyday life showed positive response satisfying from 5 point scale to more than 4 point scale. However, it was relatively low in the items of effectiveness, manipulation and convenience. Some of the improvements in the application include the enlargement of the symbol sound and the simplicity of symbol editing. The results of the study suggest that continual updates of m Smart AAC applications, the simplicity of symbolic editing, application usage and training should be improved. The satisfaction evaluation results of this study and the feedback of potential users will be the guidelines for improving and complementing the functions of existing smart AAC devices.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.71-77
• /
• 2013

Smart work has been gaining more popularity recently. Smart work means that employees perform their works anytime and anywhere as utilizing the information and communication technology. It can be divided into four categories; the mobile office, the home office, the work-at-center and the tele-cooperation. Among them, the mobile office based on tablet personal computers(PCs) or smart phones, employees can exchange information with tablet PCs or smart phones via mobile radio communication networks and portable terminals. Smart devices such as tablet PCs and smart phones help to access intranet system for requests, approvals, information search whenever employees need. This mobile office system for real-time HSE managing can contribute to improve the productivity and work efficiency in a shipyard. In this study, the main goal is to design the specialized mobile application for the HSE management system on the shipbuilding industry. The mobile application including 10 functions is designed based on ooCBD(object-oriented Component Based Development) methodology.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.389-400
• /
• 2023

Technological advancements in the field of information and communication have led to the advent and usage of various types of smart devices, which have significantly altered people's usage behaviors and environments. This change has also been applied to the learning environment, where various smart devices are appearing and the learning behavior of learners is changing accordingly. In this study, we investigate learners' perceptions of digital note-taking behaviors focusing on the recently emerged learning media, tablet PCs and digital pens. Drawing upon the expectancy-confirmation model, we conduct a study on the factors affecting the (dis)confirmation and (dis)satisfaction of undergraduate students with tablet PCs and digital pens by comparing their expectations with their actual use experiences. An open-ended survey was conducted among students at C University in Korea, and the responses were analyzed through qualitative content analysis to derive four factors of expectation-confirmation and satisfaction and three factors of expectation-disconfirmation and dissatisfaction. Based on these findings, we provide academic and educational implications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.2152-2170
• /
• 2014

With advances in smart and ICT(information and communication technology) technologies, our life style has been changing dramatically. Now everybody can enjoy the benefits of such technologies in every aspect of his/her daily life. Currently more and more people are trying to have smart devices such as smart phones and tablet PCs so that smart devices become the bare necessities. New smart technologies have created a new concept called smart learning in education area. As educational smart contents become popular, we need quality standards for the contents. Those standards are essential for evaluating the smart contents and suggesting guidance for future smart contents production. Although there are some standards for the existing e-learning environments, to our best knowledge, there are no standards for educational smart contents in the literature. The purpose of this paper is to develop quality standards for educational smart contents. The proposed quality standards are based on the existing quality standards in e-learning environments and include some characteristics of smart learning. For development of quality standards, wide experts group from academy and industry are selected and surveyed. Their responses are analyzed based on thorough statistical analysis so that final quality standards for educational smart contents are developed.