• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.26-36
• /
• 2020

It is very difficult to suppress fire by rapid flame spread through flue space between flammable commodities on the rack when a fire occurs in the rack storage. At present, the fire protection system for rack storage in Korea has many issues, and the new fire protection system was designed and developed by it. A smart system using the sensor network and artificial intelligence was designed to detect fire very rapidly and track the location of a fire. In the very early stages, the system was constructed using vertical open sprinkler pipes, wet pipes, and solenoid valves to allow water to spray near fire locations. Based on the design results, the system was installed and tested, and the full-scale test was successfully completed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.203-208
• /
• 2021

At the manufacturing site, workers have been operating by inputting materials into the manufacturing process and leaving input records according to the work instructions, but product LOT tracking has been not possible due to many omissions. Recently, it is being carried out as a system to automatically input materials using RFID-Tag. In particular, the initial automatic recognition rate was good at 97 percent by automatically generating input information through RACK (TAG) ID and RACK input time analysis, but the automatic recognition rate continues to decrease due to multi-material RACK, TAG loss, and new product input issues. It is expected that it will contribute to increasing speed and yield (normal product ratio) in the overall production process by improving automatic recognition rate and real-time monitoring through the establishment of artificial intelligent smart factory datasets.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.76-77
• /
• 2015

In construction industry, management of construction factors such as cost, schedule, quality and safety is the most important key for delivering successful projects. According to the Smart Market Report, a magazine specialized in construction industry, recently said 'Off-site Prefabrication' is a significant trend related with construction productivity in global construction industry. It is a kind of practice shift from On-site to Off-site. A lot of general contractors in oversea have been using 'Multi-trade MEP Ceiling Rack Prefabrication' method for getting benefits such as decreased cost & schedule and increased labor productivity. Thus, in this paper, critical management factors at each phase from design to installation was derived by researching case studies. Forwardly, it can be a basic guideline for applying Multi-trade MEP Ceiling Rack Prefabrication in Korea construction industry.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.99-104
• /
• 2022

In this paper, we first intend to develop and introduce a smart laundry drying system for verandas that controls the drying rack by actively responding to climate change. The developed smart laundry drying system receives laundry location information through the app, then detects climate change in real time through data from the Korea Meteorological Administration such as temperature and humidity according to the location information, and automatically controls the laundry on the drying rack in case of rain. It acquires weather information through the Arduino humidity sensor and the Korea Meteorological Administration Open-API, which is used to control the switch bot by the Raspberry Pi. The user interface uses Blynk, and the switch bot controls the laundry. Our proposed system can detect bad weather and automatically control the laundry at a remote location to prevent damage to the laundry.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.11-16
• /
• 2015

Data center, not only the development of globally of cloud-based IT solutions, As the big data, education, use of development electronic equipment of communication means is increased, Demand of domestic and international data center has increased steadily. Due to the increase of data center demand, heat generation of server rack due to the development of IT equipment is also increasing continuously. Calculating heat value of the data center, because more than 99% of the power usage of IT server is converted into heat, the calorific value as the size and capacity of the server is larger will increase. In this paper, to center the cooling system of air-cooled, and research and development of air conditioning systems for energy reduction of data center, through performance analysis and simulation, it has been analyzed that there is energy savings.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.50-55
• /
• 2020

This study investigates the injection molding of a plastic rack gear and focuses on deflections in the part. The causes of deflections were found and resolved through a trade-off study by injection molding analysis. Based on a warpage analysis, the fiber orientation was found to be a dominant factor in the occurrence of deflections. Changes in the part design and various injection conditions were analyzed for their effects in reducing deflections. Based on the trade-off study, a new part bottom design, injection time, and melt temperature were recommended. A trial injection was done for the new plastic rack gear, and measurements showed that its flatness surpassed that of the original part and met the specified requirement. The short injection time, low melt temperature, and symmetric similar configuration of the part contributed to the reduction in deflections. Therefore, optimized gate design and injection conditions as well as a new part design were validated through injection molding analysis in this study.

• Information and Communications Magazine
• /
• v.30 no.3
• /
• pp.43-50
• /
• 2013

현존하는 프로토콜 중심의 네트워킹이 가지는 근본적인 한계를 인식하고 이를 소프트웨어-정의 네트워킹(Software Defined Networking: SDN)이라는 새로운 흐름으로 해소하자는 노력이 확산되고 있다. 즉 실험자들이 점차 복잡해지는 네트워킹 문제들을 논리적으로 집중화된 단순함으로 재편하여 손쉽게 해결하자는 것이다. 본 논문에서는 SDN에 기반한 미래형 서비스 실증을 위해 핵심적인 도구로 대두된 시험환경(또는 테스트베드)의 구축 방향과 사례를 살펴본다. 먼저 가상화되고 프로그램이 가능한 융합형 실험자원들을 다수의 실험자들이 공용하는 환경을 구축하고, 개별적으로 서비스 실증을 자유롭게 시도하는 전체 프레임워크를 제시한다. 특히 융합형 자원을 Rack 방식으로 구성하고 이를 연동하여 시험환경을 구축하는 추세에 따라, 독자적인 SmartX Rack을 사용한 SDN 기반 서비스 실증을 위한 시험환경 구축 사례를 설명한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.193-194
• /
• 2024

스마트홈과 연동하는 안전한 방범창은 외부의 침입자를 차단하고 주거 내의 물품 도난 및 개인의 신변을 보호하기 위한 안전설비로 다양한 형태의 방범창이 존재한다. 스마트홈은 건물 내의 센서가 화재를 감지하면 방범창 내부의 원격시스템이 자동으로 방범창을 매우 짧은 시간 안에 개방할 수 있도록 설계한다. 화재 등 재난시 상하부 방법창이 자동으로 개폐되도록 랙피니언을 이용하여 방범창의 위쪽 창틀을 상승시켜 창살이 움직일 수 있도록 개방하고 동시에 아래쪽 창틀이 회전하도록 구성하여 화재 및 폭우 등에 인명피해를 줄일 수 있도록 설계한다. 스마트홈 시스템과의 연계로 재난을 미리 감지하고 탈출구를 개방한다면 신속하고 안전한 대피가 가능하고, 기존의 프레임 부분 변경에 간단한 시스템만 변경하여 적용할 수 있어, 간단한 구조로 설치할 수 있고 낮은 비용으로 스마트홈을 구성할 수 있다. 특히 스마트홈과 연동하여 재난을 미리 감지하고 탈출구를 개방함으로써 신속하고 안전한 대피가 가능하여 다양한 재난을 대비할 수 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.11
• /
• pp.696-701
• /
• 2016

In this study, to increase output of road piezoelectric energy harvester, it was made into rack type in which many piezoelectric materials can be installed and load transfer device of the leverage type to transfer vehicle load was made. By paving it in the road, the output characteristics depending on vehicle load and speed were evaluated. Changing vehicle load, harvester output characteristics depending on speed changes were evaluated at the interval of 10 km/h from 10 km/h to 100 km/h. Also, by making a wireless switch and sending wireless signal with output of rack type harvester, whether to receive it was evaluated by distance. It was checked that all switches work up to front-to-back 100 m from harvester.

• Smart Media Journal
• /
• v.9 no.1
• /
• pp.84-91
• /
• 2020

Along with increasing the renewable energy utilization, many researches have paid attention on the utilization and efficiency of energy storage systems. Especially, it is required an operational model in order to actively respond with each system's failure of sub-systems in the solar energy storage system. This paper proposes an energy management scheme by estimating the newly generated power based on the solar power generation samples. With comparing the estimated battery charging power in real time and the total charging power of the battery rack, a charge model is applied to adjust the charging power, As a result, the stability of energy storage system would be improved by suppressing the battery heat while maintaining battery C-Rate.