• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.41-56
• /
• 2008

In this research, optical fiber sensors and shape memory alloys (SMA) were incorporated into sandwich panels for development of a smart honeycomb sandwich structure with damage detection and shape recovery functions. First, small-diameter fiber Bragg grating (FBG) sensors were embedded in the adhesive layer between a CFRP face-sheet and an aluminum honeycomb core. From the change in the reflection spectrum of the FBG sensors, the debonding between the face-sheet and the core and the deformation of the face-sheet due to impact loading could be well detected. Then, the authors developed the SMA honeycomb core and bonded CFRP face-sheets to the core. When an impact load was applied to the panel, the cell walls of the core were buckled and the face-sheet was bent. However, after the panel was heated over the reverse transformation finish temperature of the SMA, the core buckling disappeared and the deflection of the face-sheet was relieved. Hence the bending stiffness of the panel could be recovered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.73-79
• /
• 2001

In this paper, the transmitted noise reduction performance of piezoelectric smart panels is experimentally studied. The proposed piezoelectric smart panels are comprised of plate structure on which piezoelectric sensor/actuators are bonded and sound absorbing material is provided. It is a combination of passive and active approaches utilizing a passive effect at high frequencies and an active effect at low frequencies. To prove the concept of piezoelectric smart panels, an acoustic measurement experiment is performed. An acoustic tunnel is designed and its acoustic characteristics are tested. Below 800Hz, the tunnel exhibits a plane wave guide characteristics. When an absorbing material is bonded on a single plate, a remarkable transmitted noise reduction in mid frequency range is observed except the first resonance frequency. By enabling the active control of single smart panel with negative feedback control. about 10dB noise reduction is achieved at the resonance frequencies. The double smart panel got 4dB at the first resonance frequency and has more potential to reduce the transmitted noise in a wide range frequency. Piezoelectric smart panels incorporating passive absorbing material and active piezoelectric devices is a promising technology for noise reduction in a wide range frequency.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.7
• /
• pp.76-84
• /
• 2005

For flight loads analysis of Smart UAV, applicable regulations and loads conditions should be prepared in advance, and modeling for aerodynamics, weight, and structure should be performed. Panel method is usually adopted for aircraft loads analysis to obtain aerodynamic loads. In this study, ARGON which is a multidisciplinary fixed wing aircraft design software co-developed by KARI and TsAGI was used for loads analysis. ARGON can be utilized for flutter and stress analysis as well as for flight and ground loads analysis. In this paper, flight loads analysis of Smart UAV which is a FAR 23 category airplane was performed with ARGON and the results were presented.

• Structural Engineering and Mechanics
• /
• v.10 no.3
• /
• pp.245-262
• /
• 2000

The objective of this study is to analyze the deformational characteristics of a high-vacuum insulation panel that is evacuated to eliminate significant gas-phase conductance through its thickness. The panel is composed of a metal envelope and low thermal conductance spacers. The problem is very challenging because several nonlinearities are involved concurrently. Not only are various finite element models such as triangular, rectangular, beam and circular plate models used to simulate the panel, but also several finite element programs are used to solve the problem based on the characteristics of the finite element model. The numerical results indicate that the effect of the diameter of the spacer on the vertical deformation of the plate panel is negligibly small. The parameter that mainly influences the maximum sag is the spacing between the spacers. The maximum vertical deformation of the panel can be predicted for a practical range of the spacing between the spacers and the thickness of the plate. Compared with the numerical results obtained by the finite element models and the experimental tests, they have a good agreement. The results are represented in both tabular and graphical forms. In order to make the results useful, a curve fitting technique has been applied to predict the maximum deformation of the panel with various parameters. Moreover, the panel was suggested to be a "smart" structure based on thermal effect.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.81-88
• /
• 2021

In general, a non-explosive nylon wire cutting-based holding and release mechanism has been used to store and deploy deployable solar panels of CubeSat. However, with this method, accessing the solar panel's access port for charging the cube satellite's battery and electrical inspection and testing of the PCB and payloads while the solar panel is in storage is difficult. Additionally, the mechanism must have a reliable release function in an in-orbit environment, and reusability for stow and deploy of the solar panel, which is a hassle for the operator and difficult to maintain a consistent nylon wire fastening process. In this study, we proposed a pin-puller-based solar panel holding and release mechanism that can easily deploy a solar panel without cutting nylon wires by separating constraining pins. The proposed mechanism's release function and performance were verified through a solar panel deployment test and a maximum separation load measurement test. Through this, we also verified the design feasibility and effectiveness of the pin-puller-based separation device.

• Therapeutic Science for Rehabilitation
• /
• v.8 no.1
• /
• pp.27-39
• /
• 2019

Objective: The purpose of this study was to examine the effect of the experiences of neglect on adolescent smart phone dependency, exploring the pathways through self-resilience and alienation. Methods: This study utilized the 7th wave data from the Korean Child Youth Panel Survey(KCYPS), and the sample included 1,805 participants with no missing data. The data was analyzed using SPSS 23.0 and AMOS 23.0 programs. Results: First, the experiences of neglect directly affected adolescent smart phone dependency. Second, the experiences of neglect indirectly affect smart phone dependency partially mediated by self resilience and alienation. Conclusions: The ways to prevent adolescent smart phone dependency were discussed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.393-396
• /
• 1999

본 논문에서는 흡음 재료와 압전 재료를 부착시켜 넓은 대역에서 소음 저감을 향상 시키는 압전 지능패널(piezoelectric smart panel)을 구성한 후 이를 통하여 구조물로부터 복사되는 소음의 저감 성능을 실험적으로 고찰 하였다. 우선, 단빌 평판과 흡음 재료가 부학된 편판을 구성하여 소음 저감 성능을 즉정 하였다. 그리고 두 방법을 합성하여 광 대역에서의 소음을 저감 시키기 위해 흡음 재료와 압전 재료를 부착한 압전 지능패널을 이용하여 감지기로부터 측정된 신호를 적절한 부 이득(negative gain)을 거쳐 작동기에 되먹임 하였을 때의 소음 저감 성능을 측정 하고 앞의 두 결과와 비교하였다. 실험 결과로부터 수동적 방법과 능동적 방법을 복합적으로 구성한 압전 지능패널이 넓은 주파수 대역에서 소음을 저감 시킬 수 있음을 확인할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.188-191
• /
• 2005

Taguchi method is used to determine the optimal configuration of PZT (Lead Zirconate-Titanate) patch on the host structure for improving the performance of piezoelectric shunt system. The charges generated on the surface of PZT patch are selected to be the objective function in the Taguchi method. Full three dimensional finite element models are used to simulate vibration of smart panel and to obtain the admittance of the piezoelectric shunt system. Using Taguchi method in Minitab, the optimal model is obtained. The experiment with piezoelectric shunt circuit is performed to verify the validity of the optimal model comparing with initial model.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.615-620
• /
• 2017

In this study, we have developed the resistive leakage current detecting and tripping circuit breaker based on a 32bit ARM processor. The developed leakage circuit breaker can be operated in a desired trip threshold within 0.03 seconds as specified in KS C 4613. This resistive leakage current breaker is expected to be applicable as a circuit breake for prevention of electric fires and electric shock in smart distribution panel.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1182-1188
• /
• 2011

By storing various train information in running high speed train, we can analyze the cause of train accident efficiently. we have developed the smart and high available control method to control and manage the hardware modules. The hardware modules for event recorder consist CPU, Digital Input and Output, Pulse Input, Communication, Control Panel and Crash Protected Memory. The real time operation system is used to totally control and manage the various hardware modules. The main function of control method is collection of train information, calculation of train speed, interface with other on-board control system, storing and retrieving train information, and communication with Control Panel. In Control Panel, it displays the current train speed and the status of event recorder effectively. Also user interface is provided in Control Panel.