• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.29-33
• /
• 2020

Despite the same system architecture and operation principle, Advanced Metering Infrastructure (AMI) and Internet of Things (IoT) are recognized as a heterogeneous system. This is due to the different object modeling and communication protocols used in smart meters and sensors. However, data interworking between AMI and IoT is expected to be inevitable in the future. In this paper, we propose Device Language Message Specification (DLMS) to Lightweight Machine to Machine (LwM2M) conversion model. The proposed interworking model can reduce the packet size by 46.5% compared to that of the encapsulation method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1201-1208
• /
• 2014

As the wireless communication technologies are being studied for application to marine communication networks in a fusion of marine industries and IT technology, this paper proposes a HARQ-ARQ interaction scheme for reliable communication between the smart ships. Moreover, this paper evaluates the performance of the HARQ-ARQ interaction schemes through the computer simulation. In the HARQ-ARQ interaction scheme for marine network systems, as a HARQ acknowledgement is implicitly utilized as an ARQ acknowledgement. Hence, the HARQ-ARQ interaction scheme can reduce the packet delay. However, the HARQ-ARQ interaction scheme has problems caused by the error of HARQ feedback messages. Hence, this paper considers the effect of error of HARQ feedback messages on the performance of the HARQ-ARQ interaction scheme, in marine network systems. The simulation results show that the HARQ-ARQ interaction scheme can improve the delay performance of the ships in the marine network systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1139-1145
• /
• 2014

In shipyard site, a ship is constructed by integrating lots of modules that are made in several sites with different capabilities and specifications. Recently, it needs to make a shipyard to be smart communicating various multimedia information with wired and wireless broadband networks between hierarchical shipyards. In this paper, we propose an additional function of an LTE femtocell local gateway at a remote shipyard, an information exchange method between hierarchical shipyards, and an offload method to separate the general traffic. To reduce traffic of duplicated requests in shipyard, we apply a D2D communication scheme for supporting communication between shipyard equipments without IP service network. Hence, it is expected to increase the productivity of shipyard industry with mobile communications, D2D and broadband Internet technologies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.506-515
• /
• 2015

In this paper, we propose a group playback synchronization method using adaptive synchronization delay time by the bit rate of media to synchronize a play position of streaming media between mobile smart devices. This method consists of streaming server-side and client-side synchronization algorithms based on synchronization delay time which includes connection time, control packet transmission time, streaming data buffering time, and synchronization processing time. We implement the Android media player application with synchronization support using the proposed algorithms and present the result of performance evaluation.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.11
• /
• pp.11-19
• /
• 2019

Recently, hybrid CDN/P2P video streaming architecture is specially designed and deployed to achieve the scalability of P2P networks and the desired low delay and high throughput of CDNs. In this paper, we propose a cooperative video streaming and active node buffer management technique in hybrid CDN/P2P architecture. The key idea of this streaming strategy is to minimize network latency such as jitter and packet loss and to maximize the QoS(quality of service) by effectively and efficiently utilizing the information sharing of file location in CDN's proxy server which is an end node located close to a user and P2P network. Through simulation, we show that the proposed cooperative video streaming and active node buffer management technique based on CDN and P2P network improves the performance of realtime video streaming compared to previous methods.

• Journal of Practical Engineering Education
• /
• v.10 no.2
• /
• pp.81-87
• /
• 2018

During the major sections of the network, Software-defined network control technology for the network area corresponding to the transmission network is becoming a change in network-controlled environments utilizing network operation and provisioning across the network industry. Currently development is underway along with the deployment of PTN equipment and configuration for provisioning is being phased out. It is actively introducing establishment of SDN-based control system while constructing provisioning of PTN equipment from actual commercial network. Therefore, in this thesis, we are going to look at the contents and trends of SDN systems in packet-based transmission networks based on PTN and use them in research on OpenDaylight, an open source for configuring SDN. It then Network Operator will study the software defined control techniques for operational education.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.173-178
• /
• 2019

Recently, the types and amount of data generated, collected, and measured in IoT such as smart home, security, and factory are increasing. The technologies for IoT service include sensor devices to measure desired data, embedded software to control the devices such as signal processing, wireless network protocol to transmit and receive the measured data, and big data and AI-based analysis. In this paper, we focused on developing a gateway for interfacing heterogeneous sensor network protocols that are used in various IoT devices and propose a heterogeneous network interface IoT gateway. We utilized a OpenWrt-based wireless routers and used 6LoWAN stack for IP-based communication via BLE and IEEE 802.15.4 adapters. We developed a software to convert Z-Wave and LoRa packets into IP packet using our Python-based middleware. We expect the IoT gateway to be used as an effective device for collecting IoT big data.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.1-7
• /
• 2021

In this paper, optimized media data retrieval and transmission based on the Hybrid CDN/P2P architecture and selective storage through user's prediction of requestability enable seamless data transfer to users and reduction of unnecessary traffic. We also propose a new media management method to minimize the possibility of transmission delay and packet loss so that media can be utilized in real time. To this end, we construct each media into logical segments, continuously compute weights for each segment, and determine whether to store segment data based on the calculated weights. We also designate scattered computing nodes on the network as local groups by distance and ensure that storage space is efficiently shared and utilized within those groups. Experiments conducted to verify the efficiency of the proposed technique have shown that the proposed method yields a relatively good performance evaluation compared to the existing methods, which can enable both initial latency reduction and seamless transmission.

• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.13-27
• /
• 2023

Fatigue crack is a fatal problem for steel structures. Early detection and maintenance can help extend the service life and prevent hazards. This paper presents the ultrasonic guided waves-based (UGWs-based) fatigue crack detection of a steel I-beam. The semi-analytical finite element model has been built to obtain the wave propagation characteristics. Damage indices in both time and frequency domains were analyzed by considering the characteristic variations of UGWs including the amplitude, phase angle, and wave packet energy. The pulse-echo and pitch-catch methods were combined in the detection scheme. Lab-scale experiments were conducted on welded steel I-beams to verify the proposed method. Results show that the damage indices based on the characteristic variations in the time domain can identify and localize the fatigue crack before it enters the rapid growth stage. The damage severity can be reasonably evaluated by analyzing the time-domain damage indices. Two nonlinear damage indices in the frequency domain give earlier warnings of the fatigue crack than the time-domain damage indices do. The identification results based on the above two nonlinear indices are found to be less consistent under various excitation frequencies. More robust nonlinear techniques needed to be searched and tested for early crack detection in steel I-beams in further study.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.112-118
• /
• 2023

Internet of Things(IoT) technology is developing to a stage where the Internet and objects are connected and objects themselves analyze and judge data to interconnect the real world and the virtual world in real time. This technology consists of sensors, actuators, devices, and networks, and it is being applied in various fields. As the number of IoT devices and applications increases, data traffic also increases. In this paper, a messaging system is designed and implemented in order to analyze the performance between an IoT device and MQTT broker. The experimental was performed to measure MQTT-based round-trip time and message transmission time between the IoT device and the broker. The result shows that there is no packet loss, and propagation delay affects round-trip time.