• Journal of the Society of Disaster Information
• /
• v.12 no.4
• /
• pp.381-388
• /
• 2016

In this study, we surveyed the supply and perception of Personal Protective Equipments for firefighters. As a result, most of the respondents answered that they were paid in accordance with the supply standard, but 12% of the respondents said that there were insufficient equipment. Also, satisfaction with the performance of the equipment is mostly satisfied, but the safety gloves are more than 50% dissatisfied. In summing up the results of the survey, it is urgently necessary to improve the current supply standard, which is determined by the life of PPE, to the replacement period according to the using time or frequency. Also, a new standard should be prepared through the follow - up study.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.96-97
• /
• 2011

In these days many korean people have much interested in oceanic sports and oceanic leisure equipment.. However, the current condition for the marine leisure in korea are not advanced even worse than wnderdeveloped countries.. Recently several suggestion for vitalization on the marine leisure industry and preparations of the laws & the regulations for marine leisure.. This paper suggest the new marina model using ubiquitous sensor network to reduce the risk of the policy and the investment in the filed og marine leisure industry.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.291-296
• /
• 2015

This paper describes the design of a high-speed comparator for high-speed automatic test equipment (ATE). The normal comparator block, which compares the detected signal from the device under test (DUT) to the reference signal from an internal digital-to-analog converter (DAC), is composed of a rail-to-rail first pre-amplifier, a hysteresis amplifier, and a third pre-amplifier and latch for high-speed operation. The proposed continuous comparator handles high-frequency signals up to 800MHz and a wide range of input signals (0~5V). Also, to compare the differences of both common signals and differential signals between two DUTs, the proposed differential mode comparator exploits one differential difference amplifier (DDA) as a pre-amplifier in the comparator, while a conventional differential comparator uses three op-amps as a pre-amplifier. The chip was implemented with $0.18{\mu}m$ Bipolar CMOS DEMOS (BCDMOS) technology, can compare signal differences of 5mV, and operates in a frequency range up to 800MHz. The chip area is $0.514mm^2$.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.76-83
• /
• 2015

Various products are displayed and traded in superstores. Therefore, providing the information of these diverse products plays a crucial part in acknowledging their presence. Currently, superstores mostly utilize printed materials to provide product information and promotion of displayed products. A display equipment is utilized for providing product information and promotion of certain high-end and new products. As such, utilizing an expensive display equipment in order to provide product information fragmentarily for 1 product or successively can be referred to as being inefficient. This paper aims at proposing a method that enables the description of product information efficiently by utilizing a display specific for store support in order to overcome the restriction mentioned above. A test was executed in order to verify the potential of the method of providing product information though the proposed display.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.162-169
• /
• 2019

Facial rigging technology has been developing more and more since the 21st century. Facial rigging of various methods is still attempted and a technique of capturing the geometry in real time recently also appears. Currently Modern CG is produced image which is hard to distinguish from actual photograph. However, this kind of technology still requires a lot of equipment and cost. The purpose of this study is to perform facial rigging using muscle simulation instead of using such equipment. Original muscle simulations were made primarily for use in the body of a creature. In this study, however, we use muscle simulations for facial rigging to create a more realistic creature-like effect. To do this, we used Ziva Dynamics' Ziva VFX muscle simulation software. We also develop a method to overcome the disadvantages of muscle simulation. Muscle simulation can not be applied in real time and it takes time to simulate. It also takes a long time to work because the complex muscles must be connected. Our study have solved this problem using blendshape and we want to show you how to apply our method to face rig.

• Smart Structures and Systems
• /
• v.24 no.3
• /
• pp.403-414
• /
• 2019

Offshore drilling has become a key process for obtaining oil. Offshore platforms have many applications, including oil exploration and production, navigation, ship loading and unloading, and bridge and causeway support. However, vibration problems caused by severe environmental loads, such as ice, wave, wind, and seismic loads, threaten the functionality of platform facilities and the comfort of workers. These concerns may result in piping failures, unsatisfactory equipment reliability, and safety concerns. Therefore, the vibration control of offshore platforms is essential for assuring structural safety, equipment functionality, and human comfort. In this study, an optimal multiple tuned mass damper (MTMD) system was proposed to mitigate the excessive vibration of a three-dimensional offshore platform under ice and earthquake loadings. The MTMD system was designed to control the first few dominant coupled modes. The optimal placement and system parameters of the MTMD are determined based on controlled modal properties. Numerical simulation results show that the proposed MTMD system can effectively reduce the displacement and acceleration responses of the offshore platform, thus improving safety and serviceability. Moreover, this study proposes an optimal design procedure for the MTMD system to determine the optimal location, moving direction, and system parameters of each unit of the tuned mass damper.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.249-253
• /
• 2019

Most of music-transcription systems that have been commercialized operate based on audio information. However, these conventional systems have disadvantages of environmental dependency, equipment dependency, and time latency. This paper studied a vision-based music-transcription system that utilizes video information rather than audio information, which is a traditional method of music-transcription programs. Computer vision technology is widely used as a field for analyzing and applying information from equipment such as cameras. In this paper, we created a program to generate MIDI file which is electronic music notes by using smart-phone cameras to record the play of piano.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.3
• /
• pp.49-55
• /
• 2022

The design of a battery package and a BMS module for applications using seawater rechargeable batteries, which are known as next-generation energy storage devices, is proposed herein. Seawater rechargeable batteries, which are currently in the initial stage of research, comprise primarily components such as anode and cathode materials. Their application is challenging owing to their low charge capacity and limited charge/discharge voltage and current. Therefore, we design a method for packaging multiple cells and a BMS module for the safe charging and discharging of seawater rechargeable batteries. In addition, a prototype seawater rechargeable battery package and BMS module are manufactured, and their performances are verified by evaluating the prevention of overcharge, overdischarge, overcurrent, and short circuit during charging and discharging.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.478-486
• /
• 2022

Holography is a human-friendly technology that can express 3D stereoscopic information without eye fatigue. You can experience the mysterious features of light directly and indirectly, and you can also experience the principles of 3D imaging, which makes it a very good curriculum. As such, although holography is very effective in teaching students optics and 3D imaging technology, it has not yet been systematically established. The reason is the cost burden such as expensive equipment and laboratories, and the lack of easily accessible educational equipment. We implemented a portable holographic recording system to solve this problem. In addition, since silver halides, which use harmful chemicals, are not used in the process of developing the recording medium, and photopolymers are used, it is possible to educate not only the general public but also young students. In order to improve the completeness of the recorded result, the mechanism part, light source, and recording medium part of the production system were newly constructed to complement all the existing problems. The proposed system will make holography easily accessible to many people in a variety of fields, not just education. Through the interesting experience of various features and principles of light and the production of holograms with high satisfaction, we hope to popularize them in various fields such as education.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.221-232
• /
• 2023

Recently, due to the expansion of the logistics industry, demand for logistics automation equipment is increasing. The modern logistics industry is a high-tech industry that combines various technologies. In general, as various technologies are grafted, the complexity of the system increases, and the occurrence rate of defects and failures also increases. As such, it is time for a predictive maintenance model specialized for logistics automation equipment. In this paper, in order to secure the operational reliability of the ICT/Cold-Chain Unmanned Storage, a predictive maintenance system was implemented based on the LSTM model. In this paper, a server for data management, such as collection and monitoring, and an analysis server that notifies the monitoring server through data-based failure and defect analysis are separately distinguished. The predictive maintenance platform presented in this paper works by collecting data and receiving data based on RabbitMQ, loading data in an InMemory method using Redis, and managing snapshot data DB in real time. The predictive maintenance platform can contribute to securing reliability by identifying potential failures and defects that may occur in the operation of the ICT/Cold-Chain Unmanned Storage in the future.