• 대한치과교정학회지
• /
• 제24권1호
• /
• pp.161-180
• /
• 1994

This study was performed to investigate the midline having the least difference between the right and left structure among the lines that had been used in the submentovertex analysis and secondarily to know the distribution of asymmetry and it's degree existed normal persons and asymmetric patients. The subjects consisted of 40 normal adult patients and 40 asymmetric adult patients. The computerized analyses from submentovertex cepholometric radiograph were carried out. The results were as follows : 1. The right and left difference of the perpendicular bisecting line between right and left foramen spinosum was larger than the other midlines in the anterior area and it was decreased gradually as it progressed posteriorly. Specially the difference of this line was the smallest in the area where there was foramen spinosum. 2. The right and left difference of the perpendicular line through crista gali to the line between right and left foramen spinosum was smaller than the other midlines in the anterior area and it was increased gradually as it progressed posteriorly. 3. The right and left difference of the line between crista gali and anterior process of atlas was constant and smaller than the other midlines. 4. Asymmetry was a common finding in both normal and asymmetry group and left or right dominance of asymmetry was not statistically singnificant. 5. When the analyses were undertaken after submentovertex radiogram was divided into cranial base, upper face and lower face, the more inferior part showed relative asymmetry than the more superior part.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2277-2288
• /
• 1996

This study was performed to analyze the cooling effect of heated ribs which are frequently used for cooling of electronic parts, using the numerical method. To prevent the excessive pressure drop due to turbulence promoters for the enhancement of heat transfer rate especially, the effect of the angle of turbulence promoter was investigated by the numerical analysis. Heat transfer rate with turbulence promoters with rectangular cross-section increased by 13% in average, but the coefficient of pressure drop increased by 1.68 times than that without them. In the present study, triangular cross-sectional shape turbulence promoters were suggested and numerically tested. Pressure drop of turbulence promoter with the 30 degree triangular cross-sectional shape decreased by 30% from that of rectangular cross-section promoters while heat transfer rate was almost the same. While with 4 turbulence promoters, the heat transfer rate increased by 21%, the pressure drop increased 4 times. It means that the higher capacity of cooling fan should be needed. With the triangular cross-sectional shape, the size of vortex region at the rear of promoters became considerably smaller, so pressure drop became smaller. The effect of the change of cross-sectional shape was not found in the flow pattern near the ribs, so that heat transfer characteristics in the ribs were not changed.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.145-151
• /
• 2006

Nickel and nickel-tungsten alloy were electroplated on a cold rolled and heat treated copper(Cu) substrate. 4 mm-thick high purity commercial grade Cu was rolled to various thicknesses of 50, 70, 100 and 150 micron. High reduction ratio of 30% was applied down to 150 micron. Rolled texture was converted into cube texture via high temperature heat treatment at $400-800^{\circ}C$. Grain size of Cu was about 50 micron which is much smaller compared to >300 micron for the Cu prepared using smaller reduction pass of 5%. 1.5 km-long 150 micron Cu was fabricated with a rolling speed of 33 m/min and texture of Cu was uniform along length. Abnormal grain growth and non-cube texture appeared for the specimen anneal above $900^{\circ}C$. 1-10 micron thick Ni and Ni-W film was electroplated onto an annealed cube-textured Cu or directly on a cold rolled Cu. Both specimens were annealed and the degree of texture was measured. For electroplating of Ni on annealed Cu, Ni layer duplicated the cube-texture of Cu substrate and the FWHM of in plane XRD measurement for annealed Cu layer and electroplated layer was $9.9^{\circ}\;and\;13.4^{\irc}$, respectively. But the FWHM of in plane XRD measurement of the specimen which electroplated Ni directly on cold rolled Cu was $8.6^{\circ}$, which is better texture than that of nickel electroplated on annealed Cu and it might be caused by the suppression of secondary recrystallization and abnormal grain growth of Cu at high temperature above $900^{\circ}C$ by electroplated nickel.

• Toxicological Research
• /
• 제31권2호
• /
• pp.181-189
• /
• 2015

In recent years, the use of both nano- and micro-sized lanthanum has been increasing in the production of optical glasses, batteries, alloys, etc. However, a hazard assessment has not been performed to determine the degree of toxicity of lanthanum. Therefore, the purpose of this study was to identify the toxicity of both nano- and micro-sized lanthanum oxide in cultured cells and rats. After identifying the size and the morphology of lanthanum oxides, the toxicity of two different sized lanthanum oxides was compared in cultured RAW264.7 cells and A549 cells. The toxicity of the lanthanum oxides was also analyzed using rats. The half maximal inhibitory concentrations of micro-$La_2O_3$ in the RAW264.7 cells, with and without sonication, were 17.3 and 12.7 times higher than those of nano-$La_2O_3$, respectively. Similar to the RAW264.7 cells, the toxicity of nano-$La_2O_3$ was stronger than that of micro-$La_2O_3$ in the A549 cells. We found that nano-$La_2O_3$ was absorbed in the lungs more and was eliminated more slowly than micro-$La_2O_3$. At a dosage that did not affect the body weight, numbers of leukocytes, and concentrations of lactate dehydrogenase and albumin in the bronchoalveolar lavage (BAL) fluids, the weight of the lungs increased. Inflammatory effects on BAL decreased over time, but lung weight increased and the proteinosis of the lung became severe over time. The effects of particle size on the toxicity of lanthanum oxides in rats were less than in the cultured cells. In conclusion, smaller lanthanum oxides were more toxic in the cultured cells, and sonication decreased their size and increased their toxicity. The smaller-sized lanthanum was absorbed more into the lungs and caused more toxicity in the lungs. The histopathological symptoms caused by lanthanum oxide in the lungs did not go away and continued to worsen until 13 weeks after the initial exposure.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.203-211
• /
• 2015

The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti's modeling rule and Kim's modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net ${\upsilon}$. Because resistant coefficient k decreases exponentially according as flow velocity ${\upsilon}$ increases to make $k=c{\upsilon}^{-m}$, c and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti's modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given $c=4.9(kgf{\cdot}s^2/m^4)$ and m=0.45, R (kgf) of bottom pair trawl net could show $R=4.9S{\upsilon}^{1.55}$ using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.

• 한국언론정보학보
• /
• 제25권
• /
• pp.41-64
• /
• 2004

본 연구는 지역신문의 규모가 지방정부 보도자료 이용 및 의존도, 보도성향에 어떤 영향을 미치는지를 내용분석을 통해 체계적으로 알아보고, 나아가 지역언론인들에 대한 심층 인터뷰를 통해 어떠한 요인들이 지방정부 보도자료 이용형태 및 의존도에 영향을 미친다고 생각하는지를 살펴보고자 하였다. 본 논문은 문헌연구를 토대로 신문사의 규모와 보도자료의 이용률, 의존도, 그리고 보도성향간 부적인 관계를 가설화하여, 지방정부(경북도청)에서 배포된 보도자료와 동일 권역내 4개 지역신문의 지방정부 기사를 분석하였다. 연구결과에 의하면 신문사의 규모는 지방정부 보도자료 이용률과 의존도에 유의미한 영향을 미쳐, 신문사 규모가 클수록 이용률과 의존도는 낮으며, 작을수록 높게 나타났다. 또한 지역신문의 규모와 보도성향간 정적인 관계에 대한 가설은 부분적으로 지지되었다. 본 연구에서는 신문사 규모가 작을수록 중립적 보도를 상대적으로 적게 하고, 긍정적이거나 부정적인 보도를 상대적으로 더 많이 하는 것으로 나타났다. 지역언론인들은 어떠한 요인들이 보도자료 이용률 및 의존도에 영향을 미칠 것이라고 생각하는지를 조사하기 위해 심층 인터뷰가 실시되었다. 이를 통해, 취재보도 과정에서 사회적, 경제적 요인들이 어떻게 언론사 조직과 역동적으로 관여되고 있는지에 대한 의미해석이 이뤄졌다.

• Journal of Oral Medicine and Pain
• /
• 제34권4호
• /
• pp.409-420
• /
• 2009

2006년 한 해 동안 경북대학교 구강내과에 내원한 하악과두흡수 환자 중에 MRI를 촬영한 42명을 대상으로 임상적 평가와 관절원판의 위치와 과두의 흡수 형태를 조사했으며 그리고 악안면 골격형태를 분석하여 다음과 같은 결론을 얻었다. 1. 임상적 평가 1) 여자가 34명, 남자가 8명으로 여자가 훨씬 많았으며, 이들의 연령분포는 10대가 14명, 20대가 13명, 30대가 7명, 40대가 3명, 50대가 4명 그리고 60대가 1명 이었고 10대와 20대가 대부분을 차지했다. 2) 대부분의 환자가 이상기능활동을 보고했다. 3) 다른 관절의 통증을 호소한 환자는 5명 있었지만 류마티스 관절염과 같은 자가면역질환으로 진단 받은 경우는 없었다. 2. 파노라마와 자기공명영상 소견에 대한 평가 1) 파노라마로 하악과두 골변화 관찰시에 과두의 편평화나 침식, 과두형태의 변형이 초래된 Grade II에 해당된 경우가 대부분이었다. 2) MRI를 촬영해 관절원판의 변위 여부와 과두형태 변화를 관찰 시에 비정복성 관절원판전위소견과 퇴행성 골변화가 동반된 stage IV에 해당된 경우가 대부분이었다. 3. 악안면 골격 형태 평가 1) 여자 환자에서는 SN, SAr, saddle angle의 값이 정상군 보다 유의하게 작은 값을 나타냈고, 남자에서는 SN만이 유의한 작은 값을 보였다. 2) SNA는 정상군과 차이가 없었으며, SNB는 남녀 모두에서 유의하게 작은 값, ANB는 남녀 모두에서 $4.9^{\circ}$로 유의한 큰 값을 보였다. 3) 남녀 모두 SN-GoMe, FMA의 각도가 환자군에서 유의하게 컸으며 FMA는 남자는 평균 $28.9^{\circ}$, 여자는 평균 $31.2^{\circ}$로 여자에서 수직적 성장이 더 크게 나타났다. 4) 총후안면고경(TPFH)은 남녀 모두 유의한 작은 값을 보였다. 5) Ramus height은 남녀 모두 유의하게 작은 값을 보였다. 6) Mandibular body length는 정상군과 차이가 없었다. 이들 결과들로 하악과두흡수는 소인인자로 수직적 악안면 골격형태로 인한 부하의 집중과 이상기능활동 증가로 측두하악 관절에 기계적 과부하가 가해져 과두흡수가 발생하는 것으로 생각하며 이러한 부하는 과두흡수가 발생하기 전에 관절원판을 변위시키고 형태를 변화시키며 이로써 관절은 부하를 받아들이기에 더 취약한 구조가 되어 부하가 가해지면 과두흡수가 촉진되리라 생각한다.

• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.203-215
• /
• 2015

본 연구는 농촌지역의 쇠퇴도를 진단하고, 농촌생활권의 기초단위인 읍 면 지역에 대한 공간적 쇠퇴 특성과 유형을 도출하는데 목적을 두고 있다. 이를 위해, 충청권 27개 시 군을 대상으로 거시적 차원의 쇠퇴수준과 잠재수준을 분석하여 도시차원의 쇠퇴현상을 진단한다. 다음으로 공간단위를 세분화하여 충청권의 274개 읍 면지역을 대상으로 쇠퇴수준을 분석하고, K-평균군집분석을 적용하여 쇠퇴유형 및 쇠퇴특성을 도출한다. 충청권 시 군 별 쇠퇴수준 및 잠재수준 분석결과, 충남지역의 청양군, 서천군, 태안군이 높은 쇠퇴도를 보이고 있으며, 충북지역의 전통적 낙후지역인 남부 3군(보은, 옥천, 영동)과 단양군, 괴산군의 쇠퇴도가 높게 나타나고 있다. 또한, 충청권의 읍 면지역 중 쇠퇴의 경향을 보이는 166개 읍 면지역에 대한 군집분석 결과 인구 및 주택 노후화지역(29), 경제기반 취약지역(16), 중심지접근성 취약지역(42), 주거환경 열악지역(51), 노령인구 취약지역(28)의 5개 군집유형의 쇠퇴특성이 도출되었다. 충청권 농촌지역의 쇠퇴특성과 유형화를 시도한 본 연구는 농촌지역 활성화 정책 수립에 있어 기초자료로 활용될 것으로 기대되며, 향후 연구에서는 읍 면지역 차원을 넘어 농촌정체성의 기초단위가 되는 농촌마을을 대상으로 종합적인 진단과 맞춤형 정책발굴 연구가 이어질 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3991-3998
• /
• 2012

본 연구의 목적은 만성 뇌졸중 환자에서 발목관절 각도에 따른 근 수축이 내측 비복근의 근 구조에 미치는 영향에 대해 알아보고자 하였다. 연구대상은 MAS(modified Ashworth scale) 2등급인 만성 뇌졸중 환자 10명을 대상으로 하였다. 근육 두께, 우모각, 근섬유속 길이, 최대 수의적 등척성 수축력(MVIC) 측정은 초음파 영상 촬영장치와 동력계로 이완 시(resting)와 최대 수의적 등척성 수축 시를 측정하였다. 측정결과, 근육 두께는 마비측이 정상측에 비해 유의하게 얇은 것으로 나타났고(p<.001), 발목이 저측굴곡 될수록 얇아짐을 알 수 있었다. MVIC에서는 이완 시보다 근육 두께가 유의하게 얇아지는 것을 알 수 있었다(p<.001). 우모각은 마비측이 정상측에 비해 유의하게 작은 것으로 나타났고(p<.001), 발목이 저측굴곡 될수록 커짐을 알 수 있었다. MVIC에는 이완 시보다 우모각이 유의하게 커짐을 알 수 있었다(p<.001). 근섬유속 길이는 마비측이 정상측보다 유의하게 짧은 것으로 나타났고(p<.001), 발목이 저측굴곡 될수록 짧아짐을 알 수 있었다. MVIC에는 이완 시보다 근섬유속 길이가 유의하게 짧아지는 것을 알 수 있었다(p<.001). 본 연구를 통해 만성 뇌졸중 환자에서 발목 각도에 따른 근 수축이 내측 비복근의 근 구조에 영향을 미치는 것을 알 수 있었다. 따라서, 만성 뇌졸중 환자의 영상구조적 특성을 평가하는 것은 임상적 진단과 치료에 매우 유용한 자료라 생각된다.