• Title/Summary/Keyword: Small-aperture beam

Search Result 24, Processing Time 0.031 seconds

Design and Characteristics of Shaped ADE Reflector Antennas (경면수정 ADE 반사경 안테나의 설계 및 그 특성)

  • 최학근
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.10 no.1
    • /
    • pp.122-132
    • /
    • 1999
  • In this paper, a shaped small-size ADE(Axially Displaced Ellipse) reflector antenna of 30 cm in diameter operating from 37 to 40 GHz was designed. The experimental antenna was manufactured, and the radiation characteristics evaluated. In the procedure of antenna design, aperture field distribution was assumed to uniform + parabolic distribution. And the variations of beam width, aperture efficiency, and sidelobe level as functions of aperture field distributions were investigated, and these results presented to be used in antenna design. The measured gain and sidelobe level of experimental antenna were found 39.9 dBi(efficiency : 61.9%) and -18.8 dB for 40 GHz. These values show good agreement in design goal of efficiency more than 60% and sidelobe level less than -20 dB.

  • PDF

Rotational Prism Stitching Interferometer for High-resolution Surface Testing (고해상도 표면 측정을 위한 회전 프리즘 정합 간섭계)

  • In-Ung Song;Woo-Sung Kwon;Hagyong Khim;Yun-Woo Lee;Jong Ung Lee;Ho-Soon Yang
    • Korean Journal of Optics and Photonics
    • /
    • v.34 no.3
    • /
    • pp.117-123
    • /
    • 2023
  • The size of an optical surface can significantly affect the performance of an optical system, and high spatial frequency errors have a greater impact. Therefore, it is crucial to measure the surface figure error with high frequency. To address this, a new method called rotational prism stitching interferometer (RPSI) is proposed in this study. The RPSI is a type of stitching interferometer that enhances spatial resolution, but it differs from conventional stitching interferometers in that it does not require the movement of either the mirror tested or the interferometer itself to obtain sub-aperture interferograms. Instead, the RPSI uses a beam expander and a rotating Dove prism to select particular sub-apertures from the entire aperture. These sub-apertures are then stitched together to obtain a full-aperture result proportional to the square of the beam expander's magnification. The RPSI's effectiveness was demonstrated by measuring a 40 mm diameter spherical mirror using a three-magnification beam expander and comparing the results with those obtained from a commercial interferometer. The RPSI achieved surface testing results with nine times higher sampling density than the interferometer alone, with a small difference of approximately 1 nm RMS.

An Amplitude Comparison Direction-Finding Antenna Assembly for Mounting on a Small Flight Vehicle (소형 비행체 탑재를 위한 크기 비교용 방향 탐지 안테나 조립체)

  • Kim, Jaesik
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.23 no.5
    • /
    • pp.459-465
    • /
    • 2020
  • In this paper, a compact antenna assembly for an amplitude comparison direction-finding(DF) method for a small flight vehicle is presented. Designed antenna assembly consists of four antennas and it is mounted on a radius of 1.45 λc where λc corresponds to the wavelength of the center frequency. To achieve compactness and robustness of the assembly, the elements are fed by end-launch feeding method and have modified aperture shapes of E- or H-sectoral horns. The feeding part consists of SMA connector, stepped impedance matching structure, and square waveguide of 0.6 λc × 0.6 λc. To achieve different main beam directions for every antenna which is required condition for amplitude comparison DF method, all apertures of the antennas are inclined and it makes the main beam direction of each antenna to top, bottom, left, and right with respect to the axis of the platform. To verify the validation of DF performance of the presented antenna assembly, amplitude comparison curves using measurement results are presented. The bandwidth of the antennas are above 3.2 % in Ku-band(VSWR ≤ 2:1).

2-axis deck mechanism for gap servo NFR system (근접장 시스템의 2 축 deck mechanism)

  • Jeong, Mi-Hyeon;Park, Hong-Soo;Lee, Seong-Hun;Seo, Jeong-Kyo;Choi, In-Ho;Min, Byung-Hoon
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.1031-1032
    • /
    • 2007
  • Gap servo NF (Near Field) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve higher NA, SIL (Solid Immersion Lens) is used. In the case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. Because of very small gap distance between SIL bottom and the surface of media, relative tilt tolerance is limited. In this paper, we presented 2-axis tilt mechanism for skew adjustment within small tilt margin.

  • PDF

Optimization of optical focus of composition optical system by OSLO (합성광학계의 OSLO를 통한 optical focus의 최적화)

  • Kim, Dae Nyoun;Choi, Gei Hun
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.5 no.1
    • /
    • pp.1-6
    • /
    • 2000
  • This study was to calculate spot size, focus shift and optical focus by use of OSLO when 3 wavelength, ${\omega}{\upsilon}_1=0.588{\mu}$, ${\omega}{\upsilon}_2=0.486{\mu}$ and ${\omega}{\upsilon}_3=0.656{\mu}$ in composite lens optics system & ocular optical system were respectively here, Entrance Beam Radius(mm) 1 mm, Field angle(deg) 5.7296e-0.5 mm, Image Aperture 0.053055 mm, Exit Aperture 0.903711 mm, Reflective focal length 25.181544 mm, Petzval radius -19.21839 mm, n = 1.523. It was found that a range of spot size was 0.002 mm~0.07 mm when a range of back curvature radius was 1 mm~30 mm, and 0.0005 mm~0.002 mm when of it more than 50 mm. Focus shift, 50 mm a range 3 kinds of lens was small, and it saw that of all tendency was high up to 1 mm~15 mm and up to 25 mm beyond that limits, it was going down and then going up again, optical focus 100 mm lens was best and the value when optimization with this lens was $60{\pm}1mm$.

  • PDF

SUB-Y-TYPE ANTENNA ARRAY CONFIGURATION FOR HIGH RESOLUTION INTERFEROMETRIC SYNTHETIC APERTURE RADIOMETER

  • Kang, Gum-Sil;Jiang, Jingshan;Kim, Yong-Hoon
    • Proceedings of the KSRS Conference
    • /
    • 2002.10a
    • /
    • pp.581-586
    • /
    • 2002
  • The development of 2-D radiometer is a new technical challenge for space borne remote sensing area. The Y-type antenna array has been proposed as a most efficient configuration because a large alias free FOV and a small-synthesized beam-width can be achieved compared to L-, T-type under the fixed antenna spacing. New configuration of antenna array, which is called sub-Y type configuration, is proposed to obtain a higher angular resolution than the case of Y-type array in the paper. The sub-Y type array is consisted of basic arrays, which are the Y-type array of four antenna elements. To analyze characteristics of the proposed configuration, the synthesized beam pattern is simulated through simulation. The secondary effect of the sub-Y-type is that the reconstructed image is suffered from the alias effect is appeared around the real target. The ghost targets in the reconstructed image can be reduced by the alias suppression algorithm introduced in this paper. In conclusion, the performance evaluation by use of array factor simulation shows more than 37.5% improvement in average for angular resolution and almost similar performance for temperature resolution.

  • PDF

Development and Test of ion Source with Small Orifice Cold Cathode

  • G. E. Bugrov;S. K. Kondranin;E. A. Kralkina;V. B. Pavlov;K. V. Vavilin;Lee, Heon-Ju
    • Journal of Korean Vacuum Science & Technology
    • /
    • v.5 no.1
    • /
    • pp.19-24
    • /
    • 2001
  • The paper represents the results of the development and the test of "cold cathode" ion source model with 5 cm aperture where the glow discharge is utilized for generation of electrons in the cathode of the ion source. The results of probe measurements of the ion source are represented. The integral parameters such as electron energy distribution function(EEDF), electron density and mean electron energy, discharge voltage-current characteristics, and distribution of ion beam were studied.

  • PDF

Study on vibration characteristic of NFR Disc Drive (NFR Disc Drive 진동 특성에 관한 연구)

  • Jeong, Mi-Hyeon;Song, In-Sang;Seo, Jeong-Kyo;Choi, In-Ho;Min, Byung-Hoon
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2008.04a
    • /
    • pp.874-875
    • /
    • 2008
  • Gap servo NFR (Near Field Recording) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve high NA, SIL (Solid Immersion Lens) is used. In case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. To develop NFR disc drive with very small gap distance between SIL bottom and the surface of media, we need to research for the vibration characteristics and design considerations. This paper deals with a study on vibration characteristic of NFR disc drive.

  • PDF

Measurement of Time-Series Surface Deformation at New Orleans Using Small Baseline Subset (SBAS) Method

  • Jo, Min-Jeong;Eom, Jin-Ah;Won, Joong-Sun
    • Proceedings of the KSRS Conference
    • /
    • 2008.10a
    • /
    • pp.49-52
    • /
    • 2008
  • New Orleans located in the estuary of the Mississippi River was attacked by Hurricane Katrina and suffered big flood on August 2005. Since unconsolidated Holocene to middle Miocene strata is the main basement rocks, land subsidence has been occurred steadily due to soil compaction and normal faulting. It was reported that the maximum subsidence rate from 2002 to 2005 was -29 mm/yr. Many studies in the area have been carried out for understanding the subsiding and potential risks caused by ground subsidence are weighted by the fact that a large area of the city is located below the mean sea level. A small baseline subset (SBAS) method is applied for effectively measuring time-series LOS (Line-of sight) surface deformation from differential synthetic aperture radar interferograms in this study. The time-series surface deformation at New Orleans was measured from RADARSAT-1 SAR images. The used dataset consists of twenty-one RADARSAT-1 fine beam mode images on descending orbits from February 2005 to February 2007 and another twenty-one RADARSAT-1 standard beam mode images on ascending orbits from January 2005 to February 2007. From this dataset, 25 and 38 differential interferograms on descending and ascending orbits were constructed, respectively. The vertical and horizontal components of surface deformation were extracted from ascending and descending LOS surface deformations. The result from vertical component of surface deformation indicates that subsidence is not significant with a mean rate of -3.1${\pm}$3.2 mm/yr.

  • PDF

The Study on the Design and Manufacturing of Large Aperture Cassegrain antenna (대구경 카세그레인 안테나의 설계 및 제작 고찰)

  • 박정기;이돈신
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.19 no.2
    • /
    • pp.14-22
    • /
    • 1982
  • The design and manufacfure technology of the large aperture cassegrain antenna was first studied in the country, and its performances in a trial manufactured product are measured and compared. In order to design this cassegrain antenna with reference to several literatures, the schemed order was decided. Especially, for the cassegrain antenna of 4.6m diameter which is becoming the television receiving antenna directly from satellite, in advanced countries, the 1/12 sized small section of its parabolic curved surface is made primarily with the precision of less difference than 1/16λ depth. Cares are taken also on the computer program so that the size and position of primary radiator may satisfy the minimum blocking with the given sub-reflector. The preformances of the designed antenna are shown as being 43dB in gain, 1.15 or less in VSWR, 1.1$^{\circ}$ of beam angle etc., and found to be not worse than those of foreign productions with similar type and size.

  • PDF