• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.388-400
• /
• 2018

Small houses are continuously supplied after the alleviated housing act enacted in 2009. This study aimed to conduct a survey among an expert group associated with small house construction, propose problems by discovering difficulties and vulnerable points small and medium-sized construction companies experience while launching construction works as well as factors that impede the safety and housing environment of small houses. Furthermore, it ultimately intends to propose improvements. First, low-priced order is a major cause of unreasonable contract. Most companies were found to have low-priced orders in order to manage order performance. Low bidding and low-priced order are implemented to maintain construction businesses, ultimately threatening the safety environment of buildings. In addition, it is assumed that moderate bid periods and construction periods should be guaranteed. Second, work standardization for small and medium-sized companies is needed due to numerous cases that failed to meet order process. Additionally, regular instruction is required as many employees are not fully aware of relevant contents. Third, the most urgent policy direction turned out avoidance of low-priced bidding and removing insolvent enterprises from the market. Small and medium-sized construction companies that primarily build small houses undergo poor work condition. Therefore, the safety environment of small houses should be enhanced through work standardization and avoiding low-priced order.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.127-137
• /
• 2015

This investigation is to question as to whether and how much urban residential superblocks have changed the uses of facilities, as compared with original zoning plan. The difference between the original plan for 'land use' in 1960's and current 'building uses' has been examined on six superblocks in Seoul, and the reasons for change were analyzed. Investigation results are as follows: As the original urban planning was intended for use-purification by the subdivision of zones in a superblock through zoning, current buildings uses are different from the land-use. Commercial facilities are located in residential zone along community paths because of the necessity, and business buildings are placed on the appropriate-sized lots in the middle of residential blocks, due to the need of small and low-rent offices. Also, different types of residence have been built on convenient locations in commercial zone to meet various housing needs. In conclusion, the current zoning system plays a role of controling the volume of buildings rather than the use of land. Therefore, mixed use of land, not functional separation, becomes a natural phenomenon taken place in the contemporary cities, and it is high time to adopt a mixed-use zoning system.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.197-205
• /
• 2010

This study examines for the processes of making a architectural significant issue of 20 cases form of Beijjng's hotel through analyzing the space composition from early the 1950's to 1992 in China. In the methods of analyzing process, We study the literatures, research reports and architectural drawings including the site survey. We hope to establish the principle in morphological characteristics and space composition of Beijing's high-rise hotels through analyzing the plan of these hotels. Finally, We find out the principles after researching. Firstly, Beijing's hotels in China faced on the being difficulties through the process of national development especially in political and economical conditions of country and peoples. Consequently, size of the Beijing's hotel developed with the fact that is complicated from that is single styles focused on the medium-sized one, modernizing popularity and the high-rise hotel buildings appeared plentifully and the form appeared with tall building putting first. Secondly, there are many immanent and interlocking styles in hotel's architectural block plans, many composition styles in big sized hotels, in opposition immanent styles in small sized ones and there are many trend of concourse style in medium sized hotels. To the layout of hotel's room inside of the linear styles are many in big and medium sized hotels.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.51-58
• /
• 2021

The purpose of this study is to use urban regeneration management types through classification and step-setting of physical types by administrative dong as the basis data for future urban management plans in local small and medium cities. The analysis was conducted on the physical density of each administrative dong by setting the data on urban and architecture provided by the government as three elements: buildings, lots, roads, etc. Through the system classified in this study, Mokpo City's 23 administrative districts were divided into nine management types and three management steps. Methodology can be utilized to establish areas of similar areas within the city and to use them as basic data for planning management. It is meaningful that it is possible to extract areas that need actual regeneration and maintenance through physical density analysis and plan suitable projects.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.102-112
• /
• 2010

The purpose of this study is to identify the architectural design elements of secondary shrines in traditional Buddhist temples in Korea. For this study, a survey of six kinds of secondary shrines (Myemgbujem, Yeongsanjeon, Eungjinjem, Yaksajeoun, Gwaneumjeon, Mireukjeon), according to specified design elements(building sizes, roof styles, Gongpo, Dancheong, shape of Datjip), was conducted. The results of this study are summarized as follows; Myeongbujem is built in every temples(25 examples), most having simila1ities in sizes and architectural elements(roof, Gongpo structure, Dancheong, Datjip). The majority of Yemgsanjeon(l4 examples) and Eungjinjem shrines(l5 examples) are mostly 3-Gan sized buildings, having a Matbaejibung and Ikkmg structural system. Gwaneumjeon, on the other hands, has 1he most elaborate architectural elements. Among 12 cases, 8 buildings have Paljakjibung, 9 buildings have Silk-Dancheong in innerspace, and Datjip are included in six buildings. Yaksajeon shrines are small in mnnber, but most of these shrines have a Dapo structure, and, despite of their size, are designated as cultural properties.

• Journal of the Korean housing association
• /
• v.19 no.5
• /
• pp.111-120
• /
• 2008

The aim of this study is to present the design methods about manifold location being installed and size and to draw out the proper piping size as comparing the fluctuation of discharge with manifold size and residence size through the piping network analysis, when using the same faucet in accordance. The findings are summarized as follows, 1) an appropriate header main body pipe diameter was deemed to be $32{\sim}50\;mm$. 2) the research presented design measures for the application of appropriate water supply inlet pipe diameters according to residential buildings with various sizes. 3) the header direct branch piping method is ideal for small and medium-sized residential complexes, and the header branching and semi header methods are deemed to be more favorable for large residential complexes. 4) this study offered design measures for appropriate header system main body pipe diameters, water supply inlet pipe diameters, header system piping methods, application methods for functional auxiliary equipment units, and header system installation spaces and location.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.149-152
• /
• 2008

본 논문에서는 전압 및 전류보호, 주파수보호, 순간정전, 순간전압 저하보호 및 단독운전 기능 등 보호기능을 통합한 지능형 보호 및 제어기를 내장한 30kW급 태양광 인버터의 실 계통 연계시험을 통해서 지능형 보호기기의 성능 및 효용성을 입증하고 보급 확대를 도모하고자 지능형 보호 및 제어 기능을 내장한 30kW급 태양광 인버터를 제작하고, 그 보호성능 시험을 위한 성능 시스템을 구성하여 실계통 연계 보호성능 시험을 수행하여 그 결과를 토대로 중소명 건물용 지능형 태양광 인버터 계통연계 보호기능에 대한 효용성의 입증을 통해 현장 적용 가능성을 입증하였다.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.9 no.2
• /
• pp.16-24
• /
• 2013

A multi-heat pump provides the benefits of comfort, energy conservation and easy maintenance. Recently, the multi-heat pump has been widely employed in small and medium-sized buildings. However, the control algorithm of the multi-heat pump are limited in the open literature due to complicated operating conditions. In this study, the MIMO control algorithm using integral optimum regulator was designed and the control performance of it was analyzed. In addition, system model of the control plant was developed by PRBS system identification scheme. The MIMO controller adopting the integral optimum regulator yielded satisfactory control performance results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.4
• /
• pp.343-350
• /
• 2012

The major goal of building energy management is to minimize the energy consumption while maintaining the comfortable environment condition. Nowadays building energy management to save HVAC energy and so on is the most critical issue for existing building service branch with high efficiency equipments and their optimal operation. The effects on the building energy savings of the building equipment retrofit and the improvement of its operation method, especially in the field of HVAC system, were analyzed in this study for domestic small and/or medium sized buildings. Over 8.8% of energy saving was achieved compared withe total energy consumption in commercial building. These results could be used for reasonable maintenance and efficient management of the various building service equipments and related systems.