• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.534-535
• /
• 2006

This study attempts to develope the micro-turbine generators which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could be alleviated and competition with other alternative energy sources in the changable design conditions could be attained. The micro turbine generator of a new concept was designed based on changable design conditions, hydrodynamics and theory of power transmission.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.130-137
• /
• 1999

The wing-flap stabilizing system attached under the hull bottom of a small fishing vessel to prevent the capsize by controlling the roll motions has been developed. This paper describes the background of the system design together with the experimental results. The effectiveness of the system is proven by the towing tank tests with a 1/4 scale model, showing that the roll motions of the model are much reduced by the active flap control in multidirectional irregular waves forward speeds.

• 정보학연구
• /
• 제7권1호
• /
• pp.111-120
• /
• 2004

최근 전자 상거래의 규모는 해가 거듭 될수록 크게 확산되어 가고 있으며 기업에 있어서 고객관계관리는 중요한 이슈로 부각되고 있다. 또한 인터넷 하에서의 매출 신장은 상당한 기술과 정보관리가 따라야 하는 것이다. 이에 본 논문에서는 수출 중심의 중소기업들의 고객관계관리를 위한 전자장터 기반의 전자고객 관계 관리를 위한 시스템 개발 프로세스를 제시한다.

• 지질공학
• /
• 제30권3호
• /
• pp.215-222
• /
• 2020

본 연구에서는 미국, 일본, 유럽 등 해외의 지하수 관리 사례를 조사하여 향후 우리나라 지하수 관리 개선방향을 제시하였다. 미국에서는 지하수자원 프로그램(GWRP)이 국지적-권역별로 운영된다. 일본에서는 적정지하수 이용을 관리하기 위해 소규모, 중규모 및 대규모 유역에 따라 서로 다른 지하수자원 관리프로그램이 수행되었다. 유럽에서는 지하수가 지표수와 동일하게 평가되며, 유역 단위로 지표수와 지하수를 통합 관리하고 있다. 우리나라에서는 국가차원에서 지하수 개발가능량을 하향식으로 지정하고 관리하지만 미국과 일본에서는 소규모 지역 단위에서 대규모 유역까지 범위를 확장하며 관리하는 차이가 있다. 또한 지하수 자원의 지속 가능성을 평가하려면 지속적인 지하수 관측과 조사, 데이터 분석, 지하수 개발 우선순위 결정 등을 포함하는 역동적 지하수 활용 프로그램을 운영해야 한다.

• 한국화재소방학회논문지
• /
• 제4권2호
• /
• pp.3-13
• /
• 1990

Fire Protection System is facilities that Control the fire by mechanic means. Buildings Over a Certain Scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment the kinds are various. With the development of architecture technique while modern higher buildings are increased. As fire is a first product that human make, it performed many profits and services for our mankind. Sometimes as it is profitable fire or harmful fire, it takes charge of human's life culture. Therefore fire protection system is facilities that control the ]after fire by mechanic means Building over a certain scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment, the kinds are various. With the development of architecture technique while modern Higher buildings are increased high level and fire prevent facilities aren't reached to that level. The object of this study is present the problem which appear from the analysis of place standard for fire protection facility. This study described as a following order. First. We are going to look history of the fire protection system and change course of that with the year and facility. Second, We say the frame system and special nature of the foreign fire prevent Act. Third. We understand the control reality of fire protection system. Fourth. We took out the merit of foreign fire prevent law and the problem of our current domestic system. The placing standard of proper fire protection facilities that be presented from this study are followed next. 1) We have reinforce sprinkler system placing standard for the fire extinguishing and check the spread of fire. 2) We must to be ruled the standard for keeping fire prevention system that are received reality and people's idea. 3) We should prepare lawful basis which can be place fire prevention center. 4) We have to correct the standard of use about complex building without mainuse and we take increase the real effectiveness of this. 5) We ought to match the use of current fire prevention act and the use of architecture law.

• 한국화재소방학회논문지
• /
• 제5권1호
• /
• pp.5-14
• /
• 1991

Fire Protection System is facilities that Control the fire by mechanic means. Buildings Over a Certain Scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment the kinds are various. With the development of architecture technique while modern higher buildings are increased. As fire is a first product that human make, it performed many profits and services for our mankind. Sometimes as it Is profitable fire or harmful fire, it takes charge of human's life culture. Therefore fire protection system is facilities that control the latter fire by mechanic means Building over a certain scale is required this system. As the small from the fire extinguisher as the large to the sprinkler system of automatic fire extinguishing equipment, the kinds are various. With the development of architecture technique while modern higher buildings are increased high level and fire prevent facilities aren't reached to that level. The object of this study is present the problem which appear from the analysis of place standard for fire protection facility. This study described as a following order. First, We are going to look history of the fire protection system and change course of that with the year and facility. Second. We say the frame system and special nature of the foreign fire prevent Act. Third. We understand the control reality of fire protection system. Fourth. We took out the merit of foreign fire prevent law and the problem of our current domestic system. The placing standard of proper fire protection facilities that be presented from this study are followed next. 1) We have to reinforce sprinkler system placing standard for the fire extinguishing and check the spread of fire. 2) We must to be ruled the standard for keeping fire prevention system that are received reality and people's idea. 3) We should prepare lawful basis which can be place fire prevention center. 4) We have to correct the standard of use count about complex building without mainuse and we take increase the real effectiveness of this. 5) We ought to match the use of current fire prevention act and the use of architecture law.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.243-249
• /
• 2012

A lightweight 200W direct methanol fuel cell (DMFC) stack is designed and fabricated to power a small scale Unmanned Aerial Vehicle (UAV). The DMFC stack consists of 33-cells in which membrane-electrode assemblies (MEAs) having an active area of 88 $cm^2$ are sandwiched with lightweight composite bipolar plates. The total stack weight is around 3.485 kg and stack performance is tested under various methanol feed concentrations. The DMFC stack delivers a maximum power of 248 W at 13.2 V and $71.3^{\circ}C$ under methanol feed concentration of 1.2 M. In addition, the voltage of individual cell in the 33-cell stack is measured at various current levels to ensure the stability of DMFC stack operations. The cell voltage distribution data exhibit the maximum cell voltage deviation of 28 mV at 15 A and hence the uniformity of cell voltages is acceptable. These results clearly demonstrate that DMFC technology becomes a potential candidate for small-scale UAV applications.

• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.213-223
• /
• 2016

도시에 밀집된 인구에 의하여 교통 혼잡이 빈번하게 일어나고 있으며 그에 따른 도시민의 불편이 증대 되었다. 이러한 교통 불편을 최소화 하는 방안으로 저심도 철도와 같은 다양한 교통시스템이 제안되고 있다. 본 논문에서는 경제적인 저심도 철도시스템 구축을 위하여 개발중인 트렌치쉴드의 설계와 더불어 소형 트렌치 쉴드 장비를 제작하여 트렌치 쉴드의 적용성에 대한 검토가 이루어졌다. 본 논문에서 도출한 트렌치 쉴드는 굴착부와 쉴드부, 추진부로 구성되어있다. 이렇게 검토 및 설계된 트렌치쉴드의 적용성을 검토하기 위하여 실내실험을 추진하였으며 이를 통하여 트렌치 쉴드를 통한 개착시공현장의 급속시공이 가능함을 확인하였다. 비록 실내실험이고 상대적으로 소규모의 실험이지만 트렌치 쉴드를 이용할 경우 3m/일의 시공속도 확보가 가능할 것으로 판단된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.479-482
• /
• 2008

Since late of 2000, KIER has developed a novel pyrolysis process for production of fuel oils from polymer wastes. It could have been possible due to large-scale funding of the Resource Recycling R&D Center. The target was to develop an uncatalyzed, continuous and automatic process producing oils that can be used as a fuel for small-scale industrial boilers. The process development has proceeded in three stages bench-scale unit, pilot plant and demonstration plant. As a result, the demonstration plant having capacity of 3,000 tons/year has been constructed and is currently under test operation for optimization of operation conditions. The process consisted of four parts ; feeding system, cracking reactor, refining system and others. Raw materials were pretreated via shredding and classifying to remove minerals, water, etc. There were 3 kind of products, oils(80%), gas(15%), carbonic residue(5%). The main products i.e. oils were gasoline and diesel. The calorific value of gas has been found to be about 18,000kcal/$m^3$ which is similar to petroleum gas and shows that it could be used as a process fuel. Key technologies adopted in the process are 1) Recirculation of feed for rapid melting and enhancement of fluidity for automatic control of system, 2) Tubular reactor specially-designed for heavy heat flux and prevention of coking, 3)Recirculation of heavy fraction for prevention of wax formation, and 4) continuous removal & re-reaction of sludge for high yield of main product (oil) and minimization of residue. The advantages of the process are full automation, continuous operation, no requirement of catalyst, minimization of coking and sludge problems, maximizing the product(fuel oil) yield and purity, low initial investment and operation costs and environment- friendly process. In this presentation, background of pyrolysis technology development, the details of KIER pyrolysis process flow, key technologies and the performances of the process will be discussed in detail.

• 환경영향평가
• /
• 제29권1호
• /
• pp.45-60
• /
• 2020

과거에는 대기오염, 수질오염, 폐기물 등이 환경영향평가에서 주요한 평가항목이었는데 최근에는 토지환경(토지이용, 지형), 자연생태환경(동·식물상, 자연환경자산), 사회·경제 환경 등이 주요한 평가항목으로 다뤄지고 있다. 2012년 이후 전략환경영향평가와 소규모환경영향평가의 협의결과를 보면, 90 %이상이 조건부동의였다. 그러나 환경영향평가의 협의결과는 2012년~2016년 기간 거의 대부분(94.1 %) 동의였으나, 환경정책기조가 바뀌는 2017년 이후부터 대부분(87.4 %) 조건부동의로 결정되었다. 그리고 세 종류 환경영향평가의 부동의 비율이 2013년~2016년 기간 0.3~0.6 % 밖에 되지 않았는데, 2017년~2019년 기간 1.3~3.1 %로 급증하였다. 그 사이 협의 결과에 영향을 미칠만한 제도나 분석기법의 변화가 없었다면, 협의결과의 일관성 및 공정성의 결여가 문제로 제기될 수 있다. 따라서 환경영향평가에서 입지타당성을 결정하는 토지이용, 동·식물상 및 자연환경자산, 사회·경제 등의 평가항목에 대한 지표개발과 적용에 대한 연구가 요구되고 있다. 본 연구는 환경영향평가가 전략환경영향평가, 환경영향평가, 소규모환경영향평가로 구분되어 시행되는 2012년 이후 동의, 조건부동의, 부동의 협의결과를 분석한다. 부동의 사례에 대해 6개 환경분야 중 입지타당성분석에서 중요한 토지환경과 자연생태환경의 평가항목을 중심으로 근거요인을 분석하고, 환경관련 토지이용규제와 환경관련 등급을 중심으로 개발계획이나 개발사업에 대한 환경영향평가에서 협의 결정의 개선방안을 모색한다.