• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.118-125
• /
• 1986

A small scale combustion unit was built to evaluate the CO suppression effects by various chemical additives added to coal briquettes. Among the additives tested comprising various transition metal compounds with catalytic activities, natural minerals and oxidizing agents, the copper component has shown the best CO suppression effect, and in particular, copper oxide dispersed on porous supports such as ${\gamma}-Al_2O_3$ was most effective. For instance, 0.5% of copper added to coal briquettes in this way bas exhibited 1.4 % CO in the combustion gas at the ignition and beginning stage of combustion and 0.3 % CO at the final stage. The effects of calcium compounds on the fixation of sulfur in coal were also evaluated to reduce the contents of sulfur compounds in the combustion gases.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.379-386
• /
• 1996

Photosensitive compound, 1-methyl-4-[2-(4-diethylacetylphenyl)ethenyl] pridinium methosulfate(SbQ-A salt), was synthesized from dimethyl sulfate, terephthalaldehyde mono-(diethylacetal) and 4-picoline. SbQ-A salts were reacted with poly(vinyl alcohol)s, (PVA) in aqueous solution with phosphoric acid as catalyst to give photosensitive PVA-SbQ with different SbQ content and molecular weight. Relative photosensitivity of PVA-SbQ was determined by gray scale(GS) method. The rotative sensitivity of PVA-SbQ increased with increasing amount of bound SbQ in the case of high molecular weight(MW=77,000-79,000g/mol) as substrate and decreased with decreasing molecular weight of PVA with about constant(1.3mol%) amount of bound SbQ. The most sensitive polymer was obtained when SbQ group content in PVA-SbQ reached about 2.63mol% in the case of high molecular weight(77,000-79,000g/mol) PVA. This sample showed 90 times greater sensitivity than dichromated PVA as reference photosensitive system. PVA-SbQ photosensitive polymer synthesized was applied to the photolithographic screening process of phosphor on the panel of cathode ray tube(CRT). Phosphor slurry was made with PVA-SbQ, phosphor, a small amount of surfactant and other additives using water as medium. The slurry was coated onto panel, dried by heater, exposed to UV light and then developed by distilled water. When a small amount of cationic surfactant such as cetyltrimethylammonium chloride was used in the slurry formulation, the sharpness of phosphor pattern was equal to or better than that of dichromated PVA photosensitive polymer system used currently.

• Journal of the Korean Chemical Society
• /
• v.60 no.1
• /
• pp.16-20
• /
• 2016

The solvolysis rate constants of biphenyl-4-carbonyl chloride (C₆H₅C₆H₅COCl, 1) in 19 different solvents are well correlated with the extended Grunwald-Winstein equation, using the N_T solvent nucleophilicity scale, Y_Cl solvent ionizing scale, and I aromatic ring parameter with sensitivity values of 0.31±0.10, 0.46±0.05, and 0.96±0.20 for l, m, and h, respectively. These l, m, and h values can be considered to support a dissciative S_N2 reaction pathway. This interpretation is further supported by the activation parameters, i.e., relatively small positive ΔH^‡ (15.3~16.1 kcal/mol) values and large negative ΔS^‡ (−17.2~−20.0 cal/mol·K) values.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.223-226
• /
• 2009

In this study, we investigated the recovery of copper and synthetic fuel from the waste wire by low temperature pyrolysis which can overcome problems of the recent incineration methods. Through thermal decomposition process of waste wire, we achieved the big advantage of getting usable resources as the forms of copper and fuel with a very high value. The TG/DTA and small-scale reaction experiments were carried out to determine an optimum temperature for waste wire pyrolysis. And the pyrolysis was done at 350, 450, and $550^{\circ}C$, respectively, and heating rate of the TG/DTA was $5^{\circ}C/min$ untill $700^{\circ}C$. The result shows that the optimum temperature range for dehydrochlorination of PVC was $280{\sim}350^{\circ}C$, as a lower temperature range than $400{\sim}550^{\circ}C$ of PE and PP. Practically over 95% of copper metal and synthetic fuel, which has the 8027 kcal/kg as a calorific value, were recovered from the waste wire samples.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.345-351
• /
• 2019

In this study, the hollow fibers from $TiO_2$ and various metal oxides additives were fabricated and characterized in order to remove the arsenic substance from a contaminated water. Experimental results showed the best arsenic adsorption performance from pristine $TiO_2$ hollow fibers. When metal oxides were added, the metal oxides reduced the acid sites on the surface of $TiO_2$ and the arsenic adsorption performance decreased. However, the long term arsenic adsorption performance was enhanced and showed better performance than that of using pristine $TiO_2$ hollow fibers when $Al_2O_3$ was added during the hollow fiber fabrication. In addition, the arsenic adsorption performance showed a high dependency on the specific surface area of hollow fibers. It was confirmed that the abundancy of Lewis and Bronsted acid sites provided was favorable for the arsenic adsorption. It was also demonstrated that commercially available $TiO_2$ powders can be an attractive candidate material for manufacturing hollow fibers for a small scale water treatment plant.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1638-1641
• /
• 2008

We have investigated the effectiveness of a gravure printing method for the fabrication of organic light-emitting diode (OLED) and Organic Thin Film Transistor (OTFT). Printing of the organic layers was performed with a small-scale gravure coating machine, while the metallic layers were vacuum-evaporated. Devices with gravure-printed layers are at least comparable with the spin-coated devices. Effects of the solvent formulation and surface energy mismatch between the organic layer materials on the printed patterns and device performance were discussed. We will present the initial design and experimental data of OTFT fabricated by roll-type soft contact transfer process.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.11a
• /
• pp.45-53
• /
• 2005

A novel method for evaluating the anisotropy of the deterministic features in a stochastic 2D data is introduced. The ability of the wavelet transform for the identification of the abrupt discontinuities could be used to characterize the boundary of the deterministic area in a 2D stochastic data, such as flocs in paper structure. The one-dimensional wavelet transform with a small-scale range in MD and CD could quantify the amount of the edge in both directions, depending on the intensity of each floc. The flocs that are aligned in the MD direction result in a higher value of local wavelet energy in the CD direction. Therefore, the ratio of the total wavelet energy in CD and MD directions can be used as a new anisotropy index. This index is a measure of the floc-orientation and can provide an excellent tool to obtain the orientation distribution and the major oriented angle of flocs. Various simulated images and real stochastic data such as local gloss variation of printed image and formation image, have been tested and the results show this analysis method is very reliable to measure the anisotropy of the deterministic features.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.1
• /
• pp.103-122
• /
• 2003

Recently, many graduate schools related to Cosmetic & Beauty have established, and it is very advisable. However, the following the curriculum or the teaching staff has to be made up well for making a substantial graduate school, and it will contribute largely toward to Cosmetic & Beauty industry. If it is used like a tool for only increasing the quorum of student, it is not a help to Cosmetic & Beauty industry even though many Cosmetic & Beauty courses in the graduate schools are established. The government and the industrial circles have to give thought and support to develop a university. Then special workers who train in this part will be a help to grow Cosmetic & Beauty industry. Hereafter, Cosmetic & Beauty industry is a big field of industry after medical supplies in the fine chemistry industry when we take the scale of industry and the national competitiveness into consideration. And Cosmetic & Beauty industry is a competitive field of industry with a small investment contrary to medical supplies. However, there are few educational institutions for special workers through the college of pharmacy in Cosmetic & Beauty contrary to medical supplies. Also, there is no position for managing the growth of Cosmetic & Beauty industry in the government agencies. At this point of time, it is very desirable situation that the graduate school related to Cosmetic & Beauty is established lately, and we hope that it is an opportunity for the growth of Cosmetic & Beauty industry through the interests of the university, the government, the industrial circles, and so on.

• Journal of the Korean Chemical Society
• /
• v.59 no.5
• /
• pp.373-378
• /
• 2015

The solvolysis rate constants of di-n-butyl phosphorochloridate ((CH₃CH₂CH₂CH₂O)₂POCI, 1) in 28 different solvents are well correlated with the extended Grunwald-Winstein equation, using the N_T solvent nucleophilicity scale and Y_Cl solvent ionizing scale, with the sensitivities values of 1.40 and 0.42 for l and m, respectively. These l and m values can be considered to support an S_N2 reaction pathway. This interpretation is further supported by the activation parameters, i.e., relatively small positive ΔH^≠ (8.0 to 15.9 kcal·mol⁻¹ ) values and large negative ΔS^≠ (−25.8 to −53.1 cal·mol⁻¹ ·K⁻¹ ) values, the Kivinen’s n values (0.9~1.7), and the solvent kinetic isotope effect (1.62).

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.307-312
• /
• 2023

In this study, a catalytic oxidation-heat recovery system was designed that can remove unreacted with a concentration of about 1% to 6% in the exhaust gas of hydrogen fuel cells and recover heat to ensure safety in the hydrogen economy. The safety system was devised by filling hydrogen oxidation catalysts at room temperature that can remove unreacted hydrogen without any energy source, and an exhaust-heat recovery device was integrated to efficiently recover the heat released from the oxidation reaction. Through CFD analysis, variations in pressure and fluid within the system were shown depending on the filling conditions of the hydrogen oxidation system. In addition, it was found that waste heat could be recovered by optimizing the temperature of the exhaust gas, flow rate, and pressure conditions within the heat recovery system and securing hot water above 40 ℃ by utilizing the exhaust gas oxidation heat source above 300 ℃. Through this study, it was possible to confirm the potential of utilizing hydrogen processes, which are applied in small to medium-sized systems such as hydrogen fuel cells, as a safety system by evaluating them at a pilot scale. Additionally, it could be a safety guideline for responding to unexpected hydrogen safety accidents through further pilot-scale studies.