• Korean Journal of Plant Resources
• /
• v.20 no.2
• /
• pp.99-103
• /
• 2007

Tuber yield and content of general component and diosgenin which is a main bioactive property were investigated in order to determine the growth characteristics of round typed yam (Dungeon-ma, Dioscorea opposita L.) and the potential of artificial culture at Suwon, Korea. Sprouting rates of segmented small tubers such as 3, 5, 7, 9, and 12g were respectively 60.3, 80.5, 85.3, 98.6 and 99.3% when they were investigated 30 days after planting. Segmented small tubers of 3, 5, 7, 9, and 12g enlarged respectively to 66, 87, 98, 120, and 140g in the green-house cultivation. Segmented small tubers of 3, 7, 12, 18, and 23g enlarged respectively to 35.2, 124.7, 142.7, 174.8, and 200,7g in the open-air field cultivation.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.55-63
• /
• 2005

Tuber yield and content of general component and diosgenin which is a main bioactive property were investigated in order to determine the growth characteristics of round typed yam(Dungeun-ma, Dioscorea opposita L.) and the potential of artificial culture at Suwon, Korea. Sprouting rates of segmented small tubers such as 3, 5, 7, 9, and 12g were respectively 60.3, 80.5, 85.3, 98.6 and 99.3% when they were investigated 30 days after planting. Segmented small tubers of 3, 5, 7, 9, and 12g enlarged respectively to 66, 87, 98, 120, and 140g in the green-house cultivation. Segmented small tubers of 3, 7, 12, 18, and 23g enlarged respectively to 35.2, 124.7, 142.7, 174.8, and 200,7g in the open-air field cultivation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.384-387
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.2
• /
• pp.58-63
• /
• 2009

This paper describes the effects of slider behavior over patterned media. The flying characteristics of a slider over patterned media are different from slider flying behavior over conventional plane disk. In order to perform the most realistic simulation of slider flying characteristics over patterned disk surfaces, our simulation approach virtually distributes the grooves on the slider ABS instead of on the disk surface. Also, we define SSFA which is steady-state slider flying attitude. The results show that the more patterned size is small and height is large, the more increased SSFA is. Also if patterned distance is small, then SSFA is increased. In addition, we analyzed the effects of patterned shapes.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.150-155
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.84-87
• /
• 2013

National industrial accidents, most recently occurred in the small to medium-sized industries. These companies' management for the prevention of industrial accidents, the role of the supervisor has emerged as an important issue. Small to medium-sized industries to enhance their effectiveness in the prevention of industrial accidents supervisors of work status survey and direct interviews were conducted. Proposal paper was based on the results of analysis for the role of supervisors by providing safety and health work systematically to participate.

• Journal of Forest and Environmental Science
• /
• v.28 no.4
• /
• pp.278-281
• /
• 2012

Comparative sequence analyses were conducted on complete mtDNA sequences from four small mammal species in Korea and revealed the presence of 30 well conserved sequences in various regions of the complete mtDNA sequences. The conserved sequences were found in 9 regions in protein coding genes, 10 regions in tRNA genes, 10 in rRNA genes, one region in replication origin and 2 regions in D loop. They could be used to design primers for amplifying complete mtDNA sequences of small mammals.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.142-151
• /
• 1995

Since management innovation has been practiced only in the large entrepreneur, its application to small business seems to be very difficult. However, if the participation of all employees was properly provided, management innovation could be applied to every size of business with no difficulty or problem. Management innovation can be simply defined as an innovation in consciousness of entire employee to achieve a new target within the short period. Management innovation is not easy indeed, but may be obtained through the regimentation of each member's manpower in the small business. Through the goal setting and proper steps for the goal, management innovation can be obtained. Five S movement may be one of the basic step in the achievement of management innovation. Several factors that can affect the management innovation were reviewed and applied to small business in this study. The purpose of the study is in the settlement of business culture by the application of business innovation.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.76-84
• /
• 1999

The demand of Small Self-generating System (SSS) including Small Cogeneration System (SCS) is constantly increasing with the need of electricity and/or thermal in office, hospital, hotel, and small factory, etc. It is especially recommended to operate SCS in the heat-following mode to maximize the efficiency of generator. In case of the heat-following mode SCS has got to be connected to distribution system so as to send surplus power to the utility or receive the short power from utility. But the interconnection of SSS with distribution system causes a few problems such as the bad power quality, and low security. If SSS is not promptly disconnected after faults occur (Islanding of SSS), it can not only damage equipment of utility and adjacent customers but also endanger life of human due to overvoltage or overcurrent. In this paper it has been deeply discussed if interconnection of engine self-generator/control system satisfies the protective requirement for SSS or not. 500 kW engine generator running in the Jodo island has been used to perform the analysis of interconnection.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.12
• /
• pp.42-49
• /
• 2007

When micro holes are machined by EDM, machining characteristics of machined holes are changed according to the machining conditions. Typical machining conditions are the kind of dielectric fluids, capacitance and ultrasonic vibrations. They influence electrode wear, machining time, radial clearance and taper angle. In this paper, machined holes whose depths are 300, 500, $1000\;{\mu}m$ are observed for each machining conditions. Using deionized water as a dielectric fluid makes electrode wear small, machining time short, radial clearance large and taper angle small. High capacitance makes electrode wear high. Ultrasonic vibrations make electrode wear large, machining time short, radial clearance small and taper angle small. From the results of experiments, the optimal machining conditions were obtained to machine highly qualified micro holes.