• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.93-101
• /
• 2018

A city is like a living organism that is born, grows and become extinct within an ecosystem. In recent years, more and more cities have been planned by designers rather than spontaneously growing over time. This planning means that if a city is not appropriately designed at the beginning, it is very hard to fix or adjust it later. A poor urban design inconveniences many people, and forces them to adjust to it. For this reason, it is important to design a city as optimally as possible at the design phase. One of the reasons why a city is not designed optimally is complexity. Previous urban design methods have attempted to resolve the complexity by using a top-down problem-solving method based on the experience and knowledge of the urban planner. However, such an approach does not have the organic characteristics of a bottom-up problem-solving method of an artificial life, based on the creation principle of the ecosystem. Therefore, in this study the general principle of artificial life, which can provide a solution to the bigger problems that accumulate as a result of the solutions to small units of problems, is adopted. This enables us to draw various urban design alternatives, and it proves that the alternatives, despite being drawn through a limited modeling method, have almost no differences from those designed by an expert, and its possibilities of future development has also been verified.

• KDI Journal of Economic Policy
• /
• v.34 no.3
• /
• pp.187-214
• /
• 2012

Korea's national income statistics have been compiled by the Bank of Korea since 1953. However, there is a break in the time series. The current time series (1970 onward) is based on the '1993 SNA (System of National Accounts)' suggested by the UN, and the previous time series (1953~1970) was based on the '1953 SNA'. The difference between the previous and current time series is 4.8% in 1970 when the two series overlap. The difference is even greater in terms of comparisons across industries. In addition, it has now become even more difficult to connect the current and the previous time series because, in 2009, the Bank of Korea introduced a chain weighted method for calculating the current time series (1970 onward). Under the chain weighted method, the time series underwent substantial modification; for instance, the economic growth rate during 1970~2005 is 0.9%p higher than the rate under the general method. This paper applies chain weighted values and the '1993 SNA' to the previous time series (1953~1970) by utilizing various national account manuals published by the UN and previous Korean input-output tables in order to calculate a long term time series from 1953 to 2010 based on the same criteria as the current time series (1970 onward). In the revised time series, it appears that 1953 GDP at current basic prices is 3.5% higher and the growth rate for the period of 1953~1970 is 1.5%p higher each year than under the previous time series. Under the revised time series the size of the Korean economy as of 2010 is 50-fold bigger than that of 1953. In terms of industries, manufacturing and SOC show significant expansion whereas the extent of that of the service industry is relatively small.

• Archives of design research
• /
• v.15 no.2
• /
• pp.213-222
• /
• 2002

A transfer paper, is needed in the third firing, is usually utilized for industrial ceramics in order to produce tablewares or promoting products. Products may have the same form, however; the price might be different by what kinds of design have transferred. We need to fully understand these methods in order to create high value and quality. Remodeling, the so-called second architecture, results from social Needs for renovation of structures and changing functions. Tile satisfying the need for a custom-made design which fits the features of a space. Most importantly, the remodeler must make an individual design ordered for the customer with an emphasis on economy and time efficiency. Tiles currently in the market are mass-produced using an automated system with a high-priced mold. It is difficult to find tiles of distinct design that are made in a small quantity. We need to develop a method for making various kinds of tile designs that would be marketed for the remodeling industry. In this study, after designing a certain wall with the tiffs in the space, 1 will talk about developing a method to make transfer paper to produce individual tiles for the space. 1 hope that the functional and aesthetic effect on remodeling will gain in popularity, and that we will foster a new demand for tiles in harmony with the other materials mentioned in this study.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.4
• /
• pp.847-857
• /
• 2018

As the number of malicious code increases steeply, cyber attack victims targeting corporations, public institutions, financial institutions, hospitals are also increasing. Accordingly, academia and security industry are conducting various researches on malicious code detection. In recent years, there have been a lot of researches using machine learning techniques including deep learning. In the case of research using Convolutional Neural Network, ResNet, etc. for classification of malicious code, it can be confirmed that the performance improvement is higher than the existing classification method. However, one of the characteristics of the target attack is that it is custom malicious code that makes it operate only for a specific company, so it is not a form spreading widely to a large number of users. Since there are not many malicious codes of this kind, it is difficult to apply the previously studied machine learning or deep learning techniques. In this paper, we propose a method to classify malicious codes when the amount of samples is insufficient such as targeting type malicious code. As a result of the study, we confirmed that the accuracy of 97% can be achieved even with a small amount of data by applying the Memory Augmented Neural Networks model.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.167-174
• /
• 2009

Recently, design technology of has been required such as catamaran yacht with high-speed according to expand a marine leisure industry. The domestic technical development for design and production of yacht is not actively than Canada, USA, Japan etc. However, with further development of yacht design & technology, it is need to develop a key technology related to increase the value of catamaran yacht. In the present paper, new guideline is suggest for catamaran yacht as like kinds of marine leisure ship in order for fundamental structure design and structural analysis for twin-hulled ship yacht and techniques for structural analysis as sea leisure ship in this research. The class of society has not been proposed formally about regulation and methodology for estimation of strength of small hight-speed craft with satisfying two conditions as noted; length less than 50meters, ratio of length to breadth less than 12. In the present study, we were adopted DNV (Yachts, Design Principles, Design Loads, Hull Structural Design) Rule and KR (FRP rule application guide) for scantling of structural members. Furthermore, ABS rule is used for structural calculation about application of loading conditions for catamaran yacht. This study can be available feedback role to manufacture of 38ft diffusion style for catamaran yacht. It is expected that this study will be a good reference in order to design of catamaran yacht with high-speed.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.373-380
• /
• 2017

Operational errors caused by human factors, which is the major cause of marine accidents, include lack of knowledge, misunderstanding knowledge, and inadequate procedures. Recently, the type of propulsion mounted on KCG cutters has been diversified. In particular, the water jet propulsion unit, which was mainly installed in small boats, have been gradually expanded to medium and large size Coast Guard cutters, reaching 50% of the total. Axes types are divided into 2 to 4, and the bucket types are divided into Double Reverse Bucket(DRB) and Single Reverse Bucket(SRB); in these, the backward and steering control methods are completely different. Diversification of these operating systems can increase factors causing human error by the ships' operators. However, there is a lack of research on the maneuvering methods, considering the inherent active characteristics of each type of water jet. In this paper, we analyze the sideway method suitable for the condition of Coast Guard Exclusive wharf without assistance, based on the astern performance of each type. Then, a ship handling simulator was used for the experiment; they compared and verified through interviews of captains.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.64-75
• /
• 2010

Gyeongju, with its thousand-year-old history of the Silla Dynasty, is an impressive historical city where beautiful nature of mountains in the background and rivers in its front is getting along with the city landscape. The historic landscape of Gyeongju is divided into three groups: the old town, the ruins preservation region in the southeast of old towns, and the natural landscape region surrounding these regions. The old town region shows a common landscape of which general small cities in Korea may have, while its surroundings display the overlaps of natural and historic landscapes. The special city landscape is presented only in Gyeongju. Nevertheless, the northern area of the old town was built based on the concept of new towns without any height restriction of buildings, damaging the historic landscape of Gyeongju. It is misjudgment by interpreting the cultural heritage as the individual artifact rather than the continuous historic landscape. Since the 1970s when rapid industrialization and urbanization appeared along with the comprehensive development for Gyeongju tourism, the historic landscape has been slowly damaged. There were not enough financial and political supports from the central government, because the project for Gyeongju tourism was focused on the investment on the tourist industry. Now, in order to preserve the historical city like Gyeongju which represents the culture of Korea, the central government should actively engage in its protection. Policies of the central government should be focused on educating people that the historical restoration of Gyeongju is a way of recovering the national pride, and drawing the agreement of people. For its accomplishment, the government should change its policy from economy-oriented to culture-oriented. That is, the cultural policy should be emphasized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.175-180
• /
• 2016

Waste bumpers from out-of-service vehicles are recycled in the manufacturing process of plastic parts by incorporating pristine materials after removing the coated paint on a bumper. This study examined the chemical properties and mechanical properties of a mixture of recycled bumper and pristine materials as a function of the mixing ratio. When the pristine materials and the recycled bumper pieces were mixed, the stiffness (tensile strength and the flexural modulus) was provided by their composition averages. On the other hand, the toughness (Izod impact strength and the elongation-at-break) was lower than their composition averages (i.e., negative deviation). FTIR analysis showed that these results were due to the absence of the compatibility between the pristine materials and recycled bumper pieces. When the recycled bumper pieces were loaded at more than 30 wt. %, the toughness decreased drastically. A previous study showed that a paint removal efficiency up to 80 wt.% was easily attainable. The other 20 wt.% of paint on the bumper is very difficult to remove. Therefore, this study examined the mechanical properties of a mixture of recycled bumper pieces containing the unremoved paint and recycled bumper pieces without paint. When the recycled bumper pieces containing the unremoved paint were incorporated in only small quantities, the mechanical properties were decreased to a great extent. These results show that the paint removal efficiency is very important in the recycled bumper industry.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.121-145
• /
• 2014

Operating under the principle of user-benefit maximization and democratic user-control, cooperatives are being spot-lighted as a business model satisfying the various social, financial needs. In Korea, the Law of Cooperative was enacted as of December 2012, which has enabled the establishment of cooperatives in variety of industry fields. This study is to discuss the expected effect and validity of marketing cooperative as a solution for insufficient sales revenue in international distribution of Korean animation. The interviews with Korean animation studios found out the key problems of overseas distribution, which are; 1) lack of marketing expertise and weak organization, 2) lack of ancillary rights exploitation due to the deals based upon all rights package with the broadcasters who are not interested in ancillary business, 3) lack of localized marketing support in each territory. The solution for these problems takes large and long-term marketing investment and it is far beyond the capabilities of small Korean animation studios. Marketing cooperative can provide services not available otherwise such as in-depth market research which will help the improvement of international marketing expertise. Also. as the cooperative carries enough volume of animation catalogue, it can increase negotiation power satisfying the various needs of buyers. Also, it can provide the precise marketing support for each territory by integrating every process of value chain, from TV broadcasting, merchandising, and digital media platform. Above all, a clear benefit of marketing cooperative is that, because of its user-benefit and user-control principle, the principal-agent problem can be minimized while it maximizes the profit for member studios.

• Archives of design research
• /
• v.17 no.1
• /
• pp.383-392
• /
• 2004

The power tools is the product using working power generated by electric motor. Many companies are manufacturing numerous devices. Main features of tools are included various assembled products, small, light and solid and durable enough to match several standards. Fundamental requirements for the product is excellent performance and convenience for use. The quality of them depends on the equipped motor'(s) capability, accuracy of gear and endurance against worn-out. By adapting the state-of-the-art parts, they could be used in the place from home to heavy industry broadly. They can be classified electronic drills, grinders, saws and sanders families for the household appliances. For industrial tools, bore drill, grinder, polisher, and driver drill are classified as special and high priced group. This study presents the strategy of power tool development of BOSCH, BLACK&DECKER and KEYANG. Their products were analyzed in terms of product line and product mix concept. Then they are examined by design elements, such as color, shape and material for housing. As an analysis method, the image scale parameter and criteria were applied to each company's product.