• Journal of Internet Computing and Services
• /
• v.23 no.5
• /
• pp.9-15
• /
• 2022

This paper proposes a coordinated multi-point communication (CoMP) method with channel selection to improve performance of a macro user equipment (MUE) in a dense small-cell network environment in a building located within coverage of a macro base station (MBS). In the proposed CoMP method, in order to improve the performance of the MUE located in the building, A small-cell base station (SBS) selects a channel with lower interference to the neighboring MUE and transmits appropriate signals to the MUE requiring CoMP. Simulation results show that the proposed CoMP method improves the performance of the MUE by up to 164% and 51%, respectivley, compared to a random channel allocation based traditional SBS network and CoMP method.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.383-389
• /
• 2017

A small dual-polarized base station antenna with a simple isolation patch is presented. A high isolation is achieved when using a shorted metallic isolation patch. The experimental results indicate that the measured impedance bandwidth of the proposed antenna is 1.72 GHz to 1.89 GHz for small cell systems and that the isolation is more than 30 dB. The proposed antenna exhibits good radiation patterns with a peak gain of 8 dBi.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.588-600
• /
• 2017

We develop a wireless, contact free power transfer mechanism that is safer than the direct metallic contact and robust to imperfect alignment on landing at the base station. A magnetic field is created using inductors on both the transmitting and receiving sides. We use the inductive wireless recharging to increase autonomy and decrease the sensor interference by reducing the inductor loop size. By locating four independent small receiver loops and corresponding four circuits around the quadrotor UAV, we can increase safety from circuit malfunctions in comparison to the use of just one loop. On the base station, four folding robotic bars are used to realign the receiver loops over the transmitter loops. After adequate recharging as measured by battery voltages or power consumption at the bae station, the UAV sends a signal to the base station to open the robotic bars and takes off once freed from the robotic bars.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.110-114
• /
• 2017

Using a small mobile wireless network as a supplement to the disaster safety network can be useful for eliminating small radio shadowing areas, reducing traffic overloads in disaster areas, and quickly building a disaster communication network in difficult access areas. Potable base station is needed to build a small mobile wireless network, and the portable base station using TVWS(TV White Space) is effective in terms of utilization of radio frequency resources and construction cost of wireless networks. In this paper, we design and implement a power amplifier for portable base station operating in TVWS. The implemented power amplifier operates at 470 ~ 698MHz. The gain of the implemented amplifier is more than 20.1dB, the input/output return loss is more than 11.4dB, and the isolation is more than 39.9dB when the output is off. The IMD characteristic of the power amplifier has characteristics of 61.0dBc with 18.8dBm output at 470MHz, 59.3dBc wih 18.6dBm output at 550MHz and 56.5dBc with 19.0dBm output at 690MHz. The power amplifier implemented in this paper can be used as a power amplifier for portable base station.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5212-5230
• /
• 2016

How to determine the right number of small base stations to activate in multi-cell uplinks to match traffic from a fixed quantity of K users is an open question. This paper analyses the uplink cooperative that jointly receives base stations activation to explore this question. This paper is different from existing works only consider transmitting power as optimization objective function. The global objective function is formulated as a summation of two terms: transmitting power for data and coordinated overhead for control. Then, the joint base stations activation and beamforming problem is formulated as a mixed integer second order cone optimization. To solve this problem, we develop two polynomial-time distributed methods. Method one is a two-stage solution which activates no more than K small base stations (SBSs). Method two is a heuristic algorithm by dual decomposition to MI-SOCP that activates more SBSs to obtain multiple-antennae diversity gains. Thanks to the parallel computation for each node, our methods are more computationally efficient. The strengths and weaknesses of these two proposed two algorithms are also compared using numerical results.

• ETRI Journal
• /
• v.46 no.3
• /
• pp.379-391
• /
• 2024

To meet increasing traffic requirements in mobile networks, small base stations (SBSs) are densely deployed, overlapping existing network architecture and increasing system capacity. However, densely deployed SBSs increase energy consumption and interference. Although these problems already exist because of densely deployed SBSs, even more SBSs are needed to meet increasing traffic demands. Hence, base station (BS) switching operations have been used to minimize energy consumption while guaranteeing quality-of-service (QoS) for users. In this study, to optimize energy efficiency, we propose the use of deep reinforcement learning (DRL) to create a BS switching operation strategy with a traffic prediction model. First, a federated long short-term memory (LSTM) model is introduced to predict user traffic demands from user trajectory information. Next, the DRL-based BS switching operation scheme determines the switching operations for the SBSs using the predicted traffic demand. Experimental results confirm that the proposed scheme outperforms existing approaches in terms of energy efficiency, signal-to-interference noise ratio, handover metrics, and prediction performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.203-203
• /
• 2010

Small hydropower is one of the many types of new and renewable energy, which South Korea is planning to develop, as the country is abundant in endowed resources. In order to fully utilize small hydropower resources, there is a need for greater precision in quantifying small hydropower resources and establish an environment in which energy sources can be discovered using the small hydropower geographic information system. This study has given greater precision to calculating annual electricity generation and installed capacity of small hydropower plants of 117 medium basins by inquiring into average annual rainfall, basin area and runoff coefficient, which is anticipated to promote small hydropower resources utilization. Small hydropower geographic information system was also established by additionally providing base information on quantified small hydropower resources and analysis function and small hydropower generator status, rivers, basin, rainfall gauging station, water level gauging station etc.. Established system of GIS small hydropower energy can be used gather basic information for positive applications of small hydropower energy nationwide.

• Journal of Information Technology Services
• /
• v.13 no.1
• /
• pp.125-134
• /
• 2014

Device discovery for D2D (device-to-device) communication enables a device to discover other devices in order to initiate communication with them. Devices should perform the discovery phase using a small quantity of radio resource in a short time and be able to reduce the load of the base station. Legacy device discovery schemes have focused on discovering as many target devices as possible. However, it is not appropriate for peer-to-peer D2D communication scenario. Further, synchronization problems are an important issue for discovery signal transmission. This paper proposes a discovery method that one requesting device discovers a specific target for communication. Multiple antenna beamforming is employed for the synchronization between the base station and a target device. The proposal can reduce the load of the base station using the information that it already maintains and improve the reliability of the device discovery because two times of synchronizations using beamforming among the base station and devices can make the exact discovery of a target device with mobility possible.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.2
• /
• pp.43-50
• /
• 2022

As the use of mobile data increases, the proportion of video content is increasing steeply. In order to solve problems that arise when mobile users receive data from geographically remote cloud servers, methods of caching data in advance to edge servers geographically close to the users are attracting lots of attention. In this paper, we present a caching policy that stores data on Small Cell Base Station(SBS) to effectively provide content files to mobile users by applying a delayed offloading scheme in a cellular network. The goal of the proposed policy is to minimize the size of data transmitted from Macro Base Station(MBS) because the delayed offloading scheme requires more cost than when downloaded from MBS than from SBS. The caching policy is proposed to determine the size of content file and which content file to be cached to SBS using the probability of mobile users' paths and the popularity of content files, and to replace content files in consideration of the overlapping coverage of SBS. In addition, through performance evaluation, it has been proven that the proposed policy reduces the size of data downloaded from MBS compared to other algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.776-785
• /
• 2008

Compared with the existing cellular base station whose radio parameters are configured manually, the small base station named as self-configurable base station configures its radio parameters automatically by the central controller. When installing the self-configurable base station, it should be considered primarily that the seamless coverage for the target area is secured while the signal interference to the existing cellular service area must to be minimized. In order to achieve this, it is very important to select the correct radio parameters, e.g., transmission power and working frequency. In this work, we formulate and solve the optimization problem by using mixed integer programming to optimize the air parameter for the self-configurable base stations.