• 한국의류산업학회지
• /
• 제17권5호
• /
• pp.815-827
• /
• 2015

This study analyzes the characteristics by age and type for middle aged and elderly women foot shapes aged 40-69 years. ANOVA, factor, and cluster analyzed middle aged and elderly women's foot shapes. The results of the study are as follows. First, higher age groups tended to have smaller foot lengths, ball/instep circumferences, circumferences, and ball heights with larger heel height values and higher degrees of gathering of toe 1 and toe 5 toward the feet reference axis. Second, foot lengths were 220 mm-240 mm and the ball circumference's size symbol in high frequency sections were distributed from E to EEEE in the 40s and 60s groups and from D to EEEE in the 50s group. Third, eight factors were extracted through the factor analyses of middle aged and elderly women's foot measurement items. Fourth, a cluster analyses classified the subjects into four types. Type 1 is a normal foot type with medium foot length and small ball circumference and type 2 is a long and flat foot type with a type with large foot length and ball circumference values as well as small ball height values. Type 3 is a thick foot type with a medium foot length, large ball circumference, large ball height and type 4 is a toe deformation foot type with medium foot length, small ball circumference, and a high degree of toe gathering toward the center.

• 대한수학회보
• /
• 제35권2호
• /
• pp.209-225
• /
• 1998

In this paper we obtain sharp upper and lower bounds of small ball oprobabilities for Gaussian processes with stationary increments, whose results are essential to estabilish Chung type laws of iterated logarithm.

• 대한수학회지
• /
• 제36권3호
• /
• pp.509-525
• /
• 1999

In this paper we obtain sharp upper and lower bounds of samll ball and large deviation probabilities for the increments of Gaussian processes with stationary increments, whose results are essential to establish Chung type laws of iteratted logarithm.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.670-676
• /
• 2019

We study substrate support structures and materials to improve uptime and shorten preventive maintenance cycles for chemical vapor deposition equipment. In order to improve the rolling of the substrate support, the bushing device adopts a ball transfer method in which a large ball and a small ball are mixed. When the main transfer ball of the bushing part of the substrate support contacts the substrate support, the small ball also rotates simultaneously with the rotation of the main ball, minimizing the resistance that can be generated during the vertical movement of the substrate support. As a result of the improvement, the glass substrate breakage rate is reduced by more than 90 ~ 95 %, and the equipment preventive maintenance and board support replacement cycles are extended four times or more, from once a month to more than four months, and the equipment uptime is at least 15 % improved. This study proposes an optimization method for substrate support structure and material improvement of chemical vapor deposition equipment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.810-816
• /
• 2001

In this paper, we theoretically analyzed the NRRO(the non-repeatable run-out) of a ball bearing with geometric imperfection. The quasi-static and dynamic analysis of a ball bearing was performed to calculate the displacement of shaft center caused by the form errors while the shaft is rotating. From consideration of the generating mechanism of NRRO, it is found that the waviness of one ball generates vibrations with nf$\sub$b/${\pm}$f$\sub$c/(where n is odd) components. Also it is confirmed that the outer race waviness of the order n = jZ${\pm}$1 generates vibration with jZf$\sub$c/ components. The form errors of ball bearing elements were precisely measured and NRRO of a ball bearing was calculated using the measured data. It is concluded that the ball bearings must has large ball number and small ball diameter to obtain low NRRO.

• Advances in Computational Design
• /
• 제5권1호
• /
• pp.13-34
• /
• 2020

As small size and complex metal machining components demand increases, cutting processes in microscale become necessary. Ball-end milling is a commonly used finishing process, which nowadays can be applied in the microscale size. Surface quality and dimensional accuracy are two basic parameters that affect small size components in their assembly and functionality. Thus, good quality can be achieved by optimizing the cutting conditions of the procedure. This study presents a 3D simulation model of ball-end milling in microscale developed in a commercial CAD software and its optical and computing results. These carried out results are resumed to surface topomorphy, surface roughness, chip geometry and cutting forces calculations that arising during the cutting process. A great number of simulations were performed in a milling machine centre, applying the discretized kinematics of the procedure and the final results were compared with measurements of Al7075-T651 experiments.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.63-69
• /
• 2021

This study aims to determine the flow characteristics of a one-inch small ball valve and glove valve used in industrial plants. The flow was changed through an experimental equipment, and the internal flow characteristics of the valves were compared. Considering the pressure drop, the decrease in the slope of the ball valve based on the degree of the valve opening was relatively greater than that of the glove valve; further, the slope of the glove valve was gentle while the pressure drop was high. The flow velocity of the ball valve remains consistent after the valve was opened by 70%, whereas the flow velocity of the glove valve constantly increased. The valve loss factor of the ball valve was relatively low compared with that of the glove valve. When the valve was opened by 20%, which is the beginning stage of the valve opening, the valve loss factor of the ball valve was high and gradually became low. This is a structural problem of the ball valve, and the loss factor is significant because the flow path installed at the ball valve has a considerably small area. However, the overall loss factor of glove valve is high because it has a complicated structure of flow path.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.1-4
• /
• 2006

Recently, Ball Grid Arrays(BGAs) are getting used more frequently for a package type. The connectors on a BGA consist of a large number of small solder balls in a grid shape on its bottom side. However, since balls of BGAs mounted on PCBs are not visible, inspection before mounting them is indispensable. High speed non-contact 3D measurement technologies are necessary far real-time measurement of ball height, the most important inspection item. In this paper, an accurate 3D data acquisition system for BGAs is proposed that can acquire 3D profile at high speed using a 3D smart camera and laser slit ray projection. Some clipping and morphological filtering operations are employed to remove spiky error data, which occur due to reflections from some ball area to camera direction.

• 한국멀티미디어학회논문지
• /
• 제16권2호
• /
• pp.213-225
• /
• 2013

본 논문에서는 단일 카메라와 2개의 모터를 이용하는 볼-플레이트 로봇제어장치를 설계하는 방법과 제어 오차를 줄이는 방법을 제안한다. 볼-플레이트 시스템을 설계하기 위해서는 볼의 상태 파악과 플레이트의 균형 유지가 필요하다. 볼의 상태는 캠시프트 알고리즘을 이용하여 추적하고 칼만필터로 공의 위치 오차를 보정한다. 플레이트 균형은 두 개의 모터를 움직여 제어하는데 측정 오차가 적은 DC모터를 사용하였다. 플레이트의 표면적 상태나 공의 위치 추적오류 등을 인하여 작은 오차가 여전히 남아있다. 이러한 오차는 점점 쌓이게 되며 결국은 볼의 균형유지를 방해하게 된다. 이를 해결하기 위해 적분기를 추가한 제어기를 제안한다.

• 대한수학회지
• /
• 제46권2호
• /
• pp.347-361
• /
• 2009

In this paper, by estimating small ball probabilities of $l^{\infty}$-valued Gaussian processes, we investigate Chung-type law of the iterated logarithm of $l^{\infty}$-valued Gaussian processes. As an application, the Chung-type law of the iterated logarithm of $l^{\infty}$-valued fractional Brownian motion is established.