• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.5
• /
• pp.391-399
• /
• 2012

This paper presents a method of hull form design for the assistant vessel which is used both as a lighting boat and a fish carrying boat for the fleet of newly formated purse seiner vessels. The optimum hull form parameters are searched by the Sequential Quadratic Programing(SQP) method with the power estimation method of Van Oortmerssen. The prismatic curve is redesigned from that of the reference hull by the Lackenby method. Through the modification of the hull form by using a CAD system, the design procedure is completed. The resistance performances of the reference and the modified hull forms are estimated by using a numerical simulation method. Also, the estimation of seakeeping ability and stability for the modified hull forms are carried out. And then, an optimum hull form is proposed for the designed hull form. Ship model tests for the reference and the designed hull forms are carried out at ship model basin. The results of the experiments show that the effective horse power of the designed hull form is about 22% smaller than that of the reference hull form at design speed. The designed hull form proposed in this study will contribute to the development of the hull form for Korean large purse seiner vessels.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.920-926
• /
• 2012

In this paper, marine accidents recently happened in Korea and Japan for 5 years, especially through the analysis of accident characteristics for fishing vessels, including small vessels were analyzed. Also propose a new maritime safety communication network in the form of a comprehensive considering the wave propagation characteristics and operational characteristics of radio communication equipments should be installed in the vessel through comprehensive analysis of the regulation according to the radio equipment and the ship's location identification device installation and operation.

• Journal of Power System Engineering
• /
• v.9 no.3
• /
• pp.5-9
• /
• 2005

A study on the performance and exhaust emissions of diesel engine with reducing exhaust gas temperature is performed experimentally. In this paper, experiments are performed at engine speed 2200rpm, 2600rpm and load 0%, 25%, 50%, 75% and 100% by test engine with F.W. cooler passing through exhaust gas. Main measured & analyzed parameters are exhaust gas temperature, specific fuel consumption, NOx and soot emissions etc. The obtained conclusions are as follows. (1) Specific fuel consumption is the least value at load 75% and it is decreased 1.5% after remodeling F.W. cooler. (2) NOx emission is the most value at load 100% and it is increased 30.1% after remodeling F.W. cooler. (3) Soot emission is the most value at load 100% and it is decreased 20.0% after remodeling F.W. cooler.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.487-494
• /
• 2010

In order to test the applicability of bunker-A in a diesel engine for small-fishing boat, the investigation of the engine performance and the exhaust emission was performed under various conditions of fuel property, intake air pressure and fuel temperature. It was also performed based on IMO NOx Technical code. At high load, the energy consumption rate of bunker-A was lower than that of diesel oil, and the characteristics of exhaust emission of bunker-A were similar to those, and NOx emission rates of both fuels satisfied the IMO NOx emission regulation limits. The energy consumption rate and characteristics of exhaust emission were improved as the intake air pressure was increased, but these were not improved remarkably as the temperature of bunker-A was heated. However, at low load the energy consumption rate, CO emission rate and HC emission rate of bunker-A were higher than those of diesel oil, but NOx emission rates of the fuels were about the same. In addition, at low load the energy consumption rate and CO emission rate of bunker-A were increased as the intake air pressure and the temperature were higher than normal conditions. Accordingly, it is thought that the use of bunker-A in a kind of test engine is possible at high load. On the other hand, it is thought that more research is needed to improve the combustion efficiency under low temperature and low load condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.647-652
• /
• 2002

The main object of Maritime Safety Network is to prevent Marine Accidents in advance and avoid the loss of live and property efficiently. Our country's Marine Safety Network was widely changed with its concerned rules and the operation methods through the complete operation of GMDSS system. Thus, compared with the past, maritime safety equipment and its systems were enforced, but the loss of lives from marine accidents tends to increase against the general expectation. 80 percent of the total marine accidents in Korea is caused by small fishing boats that are capsized immediately from accidents. To minimize the loss of lives they are to require the help of rescue. Lately imported GMDSS communication equipment is operated very fast automatically to issue the rescue and inform the distress, but most general small fishing boats are under 5 ton vessel and excluded from the administration of GMDSS system. In this paper is to propose the proper solution for the efficient improvement of maritime safety network suitable for the our practical circumstance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.238-246
• /
• 2021

Collision of small vessels such as fishing boats cause great personal injury. Prior to this study, the collision prevention algorithm was developed to assess the collision risk and make the collision alarm. However, a service provided for safety, such as a collision warning, not only prevents risks, but also requires a certain degree of user satisfaction to function effectively. In this study, the collision prevention algorithm for small vessels was improved to be more practical, and the effects of the improvement were confirmed by applying the algorithm. A survey conducted on the users of the collision warning service confirmed the user requirements for improving the accuracy of the collision warning system and reducing the volume and number of alarms. Accordingly, the algorithm was improved for user satisfaction, and the actual vessel experiment was performed applying the improved algorithm in an actual maritime environment. As a result, the frequency of alarm occurrence decreased compared to former algorithm, but the alarm was relatively steadily generated in dangerous situations. It was analyzed that the accuracy and practicality of the collision alarm were improved. If the practicality and reliability of the improved algorithm are verified in the further study, it will be able to effectively contribute to the prevention of collisions of small vessels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.3
• /
• pp.243-249
• /
• 1999

Specificity of catches has been analyzed to japanese tuna purse seine A principle component analysis was used to improve the efficiency of fishing and increase sustainable production and productivity of Korean tuna purse seine.The result are as follows;From the principal component analysis of the fish catches, the first principal component(Z1) to promote principal component score was skipjack Kastsuwonus Pelamis, LINNAEUS and yellowfin tuna Thunnus Albacares, BONNATERRE (Small : smaller than 10kg) and proportion was 86.8% of total. The second principal component(Z2) to increase principal component score was yellowfin tuna (Large : larger than 10kg) and proportion was 9.5%.On the other hand, fish operating that have caught skipjack and yellowfin tuna (Small and Larger) was not so much. Fish catches for one species raised volume of the catches while catches for multi-species decreased it since principal composition score for one species and both species together has been increased.Fish school could be divided into three groups of schools each of which was associated with drift objects, payaho and ship, school associated with shark, whale and porpoise and school of breezing, feeding and jumping from proportion of principal component analysis for fish catches of school types. However, the biological pattern is different among school associated with ship, payaho and school associated with drift objects for analysis eigen vector. School associated with ship, payaho and school associated with drifting object associated is judged as school which be assembled to vessel and drifted log temporary.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.383-388
• /
• 2005

To install a radar reflector on small ships, such as a small fishing vessel, a fishery buoy, and a barge ship for fishery, it is very important to develop the optimal system which may determine a proper installation location. For this, the response characteristics how waves have an effect on the small ships should be accurately analyzed. In this paper, we analyze the dynamic behaviors of small ships, which may be caused by irregular waves. To do this, we investigate how a barge ship responses to wavelength, water depth, and directions of incoming waves. The analyzed results shall be utilized to evaluate an effect on a radar cross section when we install an radar reflector on a barge ship for fishery and a small ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2019

In December 2017, many collision accidents of small vessels, such as those between oil refineries and fishing boats, occurred near Yeonghung-do in Incheon. In order to prevent marine casualties from small vessels, the government is striving to improve the safety capabilities of ship operators by strengthening education and improving the working environment. They are providing education and refining training regulations for fishermen operating vessels under 5 tons. However, the situation includes certain vulnerabilities. In this study, we propose a collision prevention algorithm for small vessels using the Wireless Access in Vehicular Environments (WAVE) communication system, which is a new communication technique to prevent collisions with small ships. The collision avoidance algorithm used is based on DCPA/TCPA. Research analyses, simulation experiments and questionnaires have been conducted to define the criteria of DCPA/TCPA. As a result, the standard for DCPA was $8(L_a+L_b)$ and for TCPA was 2.5 min. Three different accident cases were selected, and this algorithm was applied to confirm alarm responses at certain times. This algorithm can provide information to the operators of small ships in advance to help them recognize potential collision situations.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.150-160
• /
• 1994

Drift gillnet fishery for neon flying squid in the North pacific was one of the major pelagic fisheries of Korea until 1992, its annual catch was 79, 000M/T as average during 1988-1992, but moratoriumed since 1993 according to the decision of UN. Therefore, for the developing of the new fishing gear for the squid, the seven types of rip hook by automatic squid jigging machine were experimented by the korean research vessel Pusan 851 (G/T 1.126, 2.600 PS) in the North Pacific (38 $^{\circ}$30'-43 $^{\circ}$N, 152 $^{\circ}$E-178 $^{\circ}$W) from July 6. 1993 to August 31. 1993. The investigation on catch rate, dropout rate, and catch condition of the rip hooks related to the fishing lamp power for aggregating the squid were carried out during the period. The results obtained are as follows: The composition of catch by automatic squid jigging machine was 83.9% for neon flying squid. 15.5% for boreopacific gonate squid. 0.6% for boreal clubhook squid, and 0.01% for luminous flying squid. The catch rate of neon flying squid was 94.6% in 13.6-18.3$^{\circ}C$ of surface water temperature and 5.4% in others. The higher catch rate of neon flying squid was made in the range 13.6-18.3$^{\circ}C$ of temperature at the surface and about 1$0^{\circ}C$ of temperature at the 100m layer. The CPUE of neon flying squid in the 13.6-18.3$^{\circ}C$ of surface water temperature was ranged 0.8-11.8kg (8.7kg as average). The mantle length and body weight of neon flying squid caught in the experiment were ranged 18.3-51.3 cm, 140-3, 980g and mean mantle length and mean body weight were 29.4cm, 972g respectively. The catch rate of neon flying squid was the highest at dawn with a value of 25.0% of the total catch. The body weight of neon flying squid caught by the D type hooks was 1.7 times more than that of the A type hooks. The dropout rate of neon flying squid caught by the seven types hooks was 7.9-57.5% (19.0% as average), and dropout rate of the D type hooks was 7.9% with 2.7 times decrease than that of the A type hooks. The catch efficiency of small sized neon flying squid in case of using on-off switch method on fishing lamp in 15 minutes intervals was 2.6 times higher than that of the on-switch method with same fishing lamp power.