• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.1
• /
• pp.1-12
• /
• 2001

The biotope network of Susung gu is characterized as dense residence zones forming its core that enable partial biotope in and around the residential zones. First, in district I, it is possible to make these zones connected to the third district. In district II, which is abundant in biotope, it is very important not to continue destoyi9ng the existing biotopes. In the case of district III, old residence zones have fill the severe gap between forests and the Sinchun river, through redevelopment, which covers more than 30% of the biotope area with large scaled linear residence areas. In the case of district IV, limited destruction of biotope and the improvement of nature areas were suggested as the alternative for preservation of biotopes. Consequently, in the construction of the biotope network in Su-sung gu, the maintenance of existing biotopes is required. Int he old residence zones, as redevelopment occurs, by maintaining biotope area of more than 30% and making the scale of residential complexes more than 1ha, it is possible for old residence zones to accomplish the role of providing important green spaces. In the case of newly developed residential zones, by reducing the rate of pavement of traffic conducts, utilizing small sized parks at the junctions and the plantation of trees along the corridors, the entire residence zones are able to accomplish the role of providing important green space. The problem houses and connecting the inner green space of the private houses with the green spaces of the streets in some areas. Futhermore, green spaces of forests must not be used for urban development. Dual planting on sidewalks, planting plots dispersed among streets and median strips must be established on road, too.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.712-720
• /
• 1994

In digital mobile communication systems, the convolutional coding is considered as the optimum error correcting scheme. Recently, the Viterbi algorithm is widely used for the decoding of convolutional code. Most Viterbi decoder has been proposed in conde rate R=1/2 or 2/3 with memory components (m) less than 3. which degrades the error correcting capability because of small code constraints (K). We consider the design method for typical code rate R=1/2, K=7(171,133) convolutional code with memory components, m=6. In this paper, a novel construction method is presented which combines maximum likelihood decoding with a state transition double detection and comparison method. And the designed circuit has the error-correcting capability of random 2 bit error. As the results of logic simulation, it is shown that the proposed Viterbi decoder exactly corrects 1 bit and 2 bit error signal.

• The KIPS Transactions:PartB
• /
• v.11B no.2
• /
• pp.241-246
• /
• 2004

In this paper, we propose VCCV units as a processing unit of language model and compare them with clauses and morphemes of existing processing units. Clauses and morphemes have many vocabulary and high perplexity. But VCCV units have low perplexity because of the small lexicon and the limited vocabulary. The construction of language models needs an issue of the smoothing. The smoothing technique used to better estimate probabilities when there is an insufficient data to estimate probabilities accurately. This paper made a language model of morphemes, clauses and VCCV units and calculated their perplexity. The perplexity of VCCV units is lower than morphemes and clauses units. We constructed the N-grams of VCCV units with low perplexity and tested the language model using Katz, absolute, modified Kneser-Ney smoothing and so on. In the experiment results, the modified Kneser-Ney smoothing is tested proper smoothing technique for VCCV units.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.29-44
• /
• 2016

The purpose of this study is to quantitatively and visually analyze the degree of green biotope fragmentation caused by road construction and other development work using FRAGSTATS and GUIDOS tool. Moreover, linking of the endangered species research, we mapped "Biotope Fragmentation Map" of Daejeon-city. The findings of the study are summarized as follows: First, as the result of FRAGSTATS, landscape indices : number of patch(NP), mean patch size (MPS), edge length(TE), mean nearest neighbor distance(MNN), edge shape(LSI) showed meaningful change from fragmentation. Moreover, the result of GUIDOS analysis, middle core-small core-bridge-branch-edge-islet-perforation showed increase of area percentage without large core. Lastly, analysis result of 'Biotope Fragmentation Map' revealed that changing site of large core's size appeared eighteen-site and designated as the special protection area appeared forty-one site. As the result of the two data, overlapping areas that showed both change of core size and revealed special protection areas revealed four site. For example, five species of endangered species appeared on the NO. 4 site in 'Biotope Fragmentation Map'. The findings of this study as summarized above are considered to play an important role in basic data preventing green biotope fragmentation at the planned level from various development work.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.89-100
• /
• 2017

The Agricultural Policy/Environmental eXtender (APEX) model was developed to extend EPIC's capabilities of simulating land management impacts for small-medium watershed and heterogeneous farms. APEX is a flexible and dynamic tool that is capable of simulating a wide array of management practices, cropping systems, and other land uses across a broad range of agricultural landscapes. APEX have its own agricultural environmental database including operation schedule, soil property, and weather data etc., by crops. However, agriculture environmental informations the APEX model has is all based on U.S. As this can cause malfunction or improper simulation while simulating highland field. In this study, database for APEX model to be utilized for South Korea established with 44,814 agriculture fields in Pyeongchang-gun, Korea from 2007 to 2016. And assessed domestic applicability by comparing T-P unit load criteria presented by National Institution of Environmental Research and result of APEX model. As a result of APEX model simulation, average T-P value for decade was 6.18. Average T-P of every year except 2011 was in range of 5.37~10.43 and this is being involved into criteria presented by National Institution of Environmental Research. It is analyzed that adjusting slope factor can make the model applicable for domestic agricultural environment.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.180-189
• /
• 2010

Since collective houses are started to be supplied, the housing market has been transformed from supplier to demander oriented, and various type with same area of unit households have been deigned and started to be distributed. It can be expected that such transfer phenomenon would be continuously sped-up, and unit household will be more subdivided and varied. Thus, we analysed and studied the planes with subject of unit households in national housing scale ($85m^2$) that is treated as supply standard and has biggest volume in construction by Korean housing corporation. The analysing method is investigating the area of each room within unit household, calculating their minimum, maximum, and average values, studying the efficiency of unit household plane according to the structure of each room by comparative analysis these values, and analysing changing matter by investigating any change of each room area. The analysing results of which are followings. At first, number of BAY on face is increasing. Second, allocation of each room has been vary. Third, area ratio among bedroom1, livingroom, diningroom/kitchen become similar. Fourth, the area of diningroom/kitchen become somewhat bigger. Fifth, the space for passage way is efficiently allocated. Sixth, service area is reduced, Seventh, stereotyped phenomenon Is appeared. Based on many studies so far, any improvements of unit householder in national housing scale are followings. First, in terms of forming style, unit householder in national housing scale is unfolded in various way though, the form of each room is not more than typical style. Second, it shows stereotyped phenomenon. Especially, bathroom 1, 2 show stereotyped feature in terms of their type and area across entire research years, also LDK allocation method is stereotyped, as well as stereotyped trend in bedroom 2, 3, allocation for 4 BAY type.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.2
• /
• pp.178-184
• /
• 2004

The Yatomi - Aioiyama line is a city-planning road that was notified in 1957 and subsequently prepared by land readjustments. Currently, approximately 900m of road pass in the inside of the Aioiyama green area has not been constructed. The surveying briefing session for inhabitants was held in July 1992, the project was authorized by the Ministry of Land, Infrastructure and Transport in September 1993, and the project briefing session for inhabitants was held in September 1993. The site purchase has been completed. At the May 2000 briefing session, inhabitants of the area began voicing dissenting demanding the conservation of the natural environment of this green area. The inspector system serves as the third party, independent of both the administration and the inhabitants. Before finalizing the geometric line form of the road to be constructed, some surveys of animals and plants found along the walking trails carried out intensively in the northern area, which is approximately 50 ha, of the Aioiyama green area. The natural environment inspector submitted a plan for changing the geometric line form of the road decided upon by city planning, and it was approved by the city planning council. If the shelter structure or the retaining wall structure is adopted at the location where large slope faces are produced by excavation or landfill, and if the bridge structure is adopted at the place where stream-lines and walking trails intersect, it leads to a reduction of approximately $40\%$ in the areas for which change is planned. Furthermore, approximately $20\%$ of the area to be changed is restored by returning soil to the roof of the shelter.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.1
• /
• pp.53-63
• /
• 1994

There are lots of forests around the Korean rural village. This study was conducted to investigate the state of the forests by the 15 forests case study of the Kamgok region in Chon-guk-Do province, Korea. The results are as follows. 1. The forests lose mostly original form by the construction of road and forest clearing for the land development business. And almostly the form of the forests is a trapezoid or roundness. 2. The forests were remained on account of the Korean cemetery customs which is burying underground. 3. The conservation of the forests becomes more difficult because of the continuous development pressure. 4. Because the scale of the forests is so small, they aren't named as the natural resort forest by the forest law. So it will be the better alternative that they are conserved and used by inducing the concept of the village resort forest. 5. Because the owenership of the forests exists in a person or a family, the forests will be destructed continuously by the cemetery development. 6. The vegetation of the upper trees in the forests is the simple forests of Pinus densiflora, Pinus rigida and bamboo. The height of upper tree is average 10-12m. And average root diameter is 13-29cm. The age of the tree is average 50 years old. The state of the forests is mostly fine. 7. It is clarified that the price of the forest land is 3-5 times expensive than the other cultivated land. 8. The forests were made by the forefathers for the purpose of the practical use and were reforested in the era 1960s, 1970s.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.139-146
• /
• 2010

This research was conducted to analyze the behavior of the post-tensioned concrete pavement (PTCP) system in which weigh-in-motion (WIM) sensors were installed. One lane of PTCP was constructed after removing the existing asphalt pavement. The frictional resistance between the slab and the underlying layer should be small enough for the PTCP slab to properly have prestresses by tensioning. By performing an experimental construction of PTCP, the friction effects and the longitudinal displacements of PTCP under environmental loads were investigated. Based on the knowledge obtained from the experiments, the actual PTCP sections including WIM sensors were constructed and the curling behavior of the system was investigated. As a result, the behavior of the PTCP system was not affected by the existence of WIM sensors, and the appropriate PTCP system when installing WIM sensors in it could be developed.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.107-115
• /
• 2009

This study was conducted to investigate the effect of the slab thickness on the tensioning design and to determine the optimal slab thickness of the post-tensioned concrete pavement (PTCP). The tensile stresses due to the vehicle and environmental loads were obtained using a finite element analysis model and the tensioning stress was calculated employing an allowable flexural strength. The environmental loads of both the constant temperature gradient and the constant temperature difference between top and bottom of the slab were considered. The tensioning designs for various slab thicknesses were performed considering prestressing losses. The comparison results showed that generally as the thickness increased, the number of tendons became larger. Consequently, the design was not economical for a thicker slab thickness. Even though the number of tendons became smaller with an increase in the thickness under the small environmental load, a thicker PTCP slab was not economical because of a higher cost of concrete than that of steel. Therefore, the slab thickness should be kept in minimum within the construction available thicknesses.