• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.369-375
• /
• 2006

Large eddy simulation has been applied to simulate turbulent flow around a cubic obstacle mounted on a channel surface for a Reynolds number of 40000(based on the incoming bulk velocity and the obstacle height) using a Smagorinsky model and a Lagrangian dynamic model. In order to develop the LES to the practical engineering application, the effect of upwind scheme, turbulent sub-grid scale model were investigated. The computed velocities. turbulence quantifies, separation and reattachment length were evaluated by compared with the previous experimental results.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.40-47
• /
• 2000

The turbulent flow with wake, reattachment and recirculation flow is very important from the viewpoint of engineering. But that is still difficult because of especially the unsteady problems which are related with the vehicle dynamics and the aerodynamics noise. This paper evaluate LES that can analyze about all fluid flow region including the laminar, transition and turbulent. So we compare the results of LES with those of PIV measurement and Reynolds averaging models. In conclusion, LES predicts flow behavior better than Reynolds averaging models.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.169-178
• /
• 2011

격자볼츠만 방법(LBM)을 이용하여 난류 경계층에서의 오염물질 확산에 대하여 수치계산을 수행 하였다. 난류 경계층 내의 유동을 모사하기 위하여 격자볼츠만 방법에 Smagorinsky 아격자 모델을 적용한 LB-SGS 모델을 사용하였으며, 오염물질의 확산을 모사하기 위하여 Passive-scalar 방법을 적용하였다. LB-SGS 모델의 신뢰성 검증을 위하여 Fackrell & Robins(1982)과 Raupach & Legg(1983)의 실험 조건과 동일한 조건하에서 수치계산을 수행하였고, 수치계산으로 얻어진 농도 분포를 실험값과 비교하였다. 이 결과로부터 LB-SGS 모델이 난류 경계층 내에서의 오염물질의 농도분포를 예측하는데 적합한 모델임을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권3호
• /
• pp.423-433
• /
• 2004

A large eddy simulation (LES) is performed for turbulent flow in a combustion device. The combustion device is simplified as a cylindrical chamber with sudden expansion. A flame holder is attached inside a cylindrical chamber in order to promote turbulent mixing and to accommodate flame stability. The turbulent sub-grid scale models are applied and validated. Emphasis is placed on the evaluation of turbulent model for the LES of complex geometry. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The calculated Reynolds number is 5000 based on the bulk velocity and the diameter of inlet pipe. The predicted turbulent statistics are evaluated by comparing with the LDV measurement data. The Smagorinsky model coefficients are estimated and the utility of dynamic SGS models are confirmed in the LES of complex geometry.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.94-103
• /
• 2015

The turbulent flow characteristics in the channel flow are investigated using large eddy simulation(LES) of FDS code, built in NIST(USA), in which the near-wall flow is solved by Werner-Wengle wall function. The periodic flow condition is applied in streamwise direction to get the fully developed turbulent flow and symmetric condition is applied in lateral direction. The height of the channel is H=1m, and the length of the channel is 6H, and the lateral length is H. The total grid is $32{\times}32{\times}32$ and $y^+$ is kept above 11 to fulfill the near-wall flow requirement. The Smagorinsky model is used to solve the sub-grid scale stress. Smagorinsky constant $C_s$ is 0.2(default in FDS). Three cases of Reynolds number(10,700, 26,000, 49,000.), based on the channel height, are analyzed. The simulated results are compared with direct numerical simulation(DNS) and particle image velocimetry(PIV) experimental data. The linear low-Re eddy viscosity model of Launder & Sharma and non-linear low-Re eddy viscosity model of Abe-Jang-Leschziner are utilized to compare the results with LES of FDS. Reynolds normal stresses, Reynolds shear stresses, turbulent kinetic energys and mean velocity flows are well compared with DNS and PIV data.

• 한국항공우주학회지
• /
• 제44권4호
• /
• pp.343-351
• /
• 2016

초임계 환경에서 작동하는 와류형 분사기의 극저온 질소 분무특성을 3차원 LES 수치기법을 적용하여 연구하였다. 초임계 상태에서 질소의 상태량을 예측하기 위해 초임계 상태에서 적용되는 상태방정식들을 비교하여 가장 정확한 SRK 상태방정식을 적용하였다. 또한 점성계수와 열 전도도는 Chung이 제안한 고압상태 혼합물에 대한 방정식을 적용하였으며 확산계수는 Fuller의 이론에 Takahashi가 제안한 방정식을 적용하였다. 질소로 채워진 50bar의 챔버에 5bar의 차압으로 질소를 분무하여 수치해석을 수행하였다. FFT를 이용한 주파수 분석을 통해 대수적 Smagorinsky와 동적 Smagorinsky를 실험결과와 비교하여 동적모델이 더 적합함을 판단하였다. 분사기 내부의 액막, 가스층에서 나타나는 불안정성과 분사기 외부에서 나타나는 불안정성의 원인에 대해 분석하고, 불안정성이 분사기 내부로 전파되는 현상에 대해 조사하였다. 또한 분무각에 대하여 실험 결과와 비교 검증하였다.