• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.315-319
• /
• 2015

Yttria-stabilized zirconia (YSZ)-based micro tubular SOFC single cells were fabricated by electrophoretic deposition (EPD) process. Stable slurries for the EPD process were prepared by adding phosphate ester (PE) as a dispersant in order to control the pH, conductivity, and zeta-potential. NiO-YSZ anode support, NiO-YSZ anode functional layer (AFL), and YSZ electrolyte were consecutively deposited on a graphite rod using the EPD process; materials were then co-sintered at $1400^{\circ}C$ for 4 h. The thickness of the deposited layer increased with increasing of the applied voltage and the deposition time. A YSZ-based micro tubular single cell fabricated by the EPD process exhibited a maximum power density of $0.3W/cm^2$ at $750^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.59-66
• /
• 2015

A new concept of an inorganic foaming process at low temperature was demonstrated for the production of inorganic thermal insulating materials with the properties of flexible light-weight, the advantages of organic-based thermal insulation material. The foaming process was proceeded by establishing a skeleton of the foam body by using inorganic fibrous sepiolite and aluminum silicate. A cavity was formed by the expansion of fibrous skeleton body, by the gas which was generated from foaming agent at low temperature. Then the multi-vesicular expanded perlite with low thermal conductivity was filled into the cavity in a skeleton of the foam body. Finally through these overall process, a new inorganic foamed body could be obtained at low temperature without the hot melting of inorganic materials. In order to achieve this object, various preparations such as fibrous sepiolite fibrillation process, heat treatment process of the fibrous slurry were needed, and the optimal compositional condition of slurry was required. The foam body produced showed the properties of flexible light-weight thermal insulation materials such as bulk density, yield strength, flexural strength, and high heat resistance.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.161-167
• /
• 2006

The purpose of this study is to find the optimal conditions of PCM slurry manufacturing equipment for saving the marketing cost and keeping the original quality of products. In addition, the characteristics of the movable container for shipping or distributing products is analysed. The major results are as follows. 1. PCM thermal storage system is designed with the conditions of temperature($-5{\sim}10^{\circ}C$), cold chain time(30 minutes), and one time usage(50 liter). This system includes tank, freezer, circulating pump, cycle type heat exchanger, swelling tank, equipment of supplying PCM supplying unit includes cold tank, cycle type heat exchanger, suction unit and control equipments, etc. 2. After ability test of PCM thermal storage system, it shows that the required freezing time of PCM thermal storage system is less than one of the previous system. The reason is that churn (top and bottom) and compulsion circulation are occurred simultaneously and unit cooler type method is better than chiller type method. 3. By the experiment of transportation latent heat container, it is decided that the best container is $K_1$ with latent heat temperature($0{\sim}5^{\circ}C$) and density(0.15%). However, for $K_l\;and\;K_2$, it is necessary more studies on latent heat thermal conditions and conditions of making method.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.225-229
• /
• 1993

ATZ was prepared by adding an alumina sol equivalent to 2wt% as $Al_2O_3$ to an aqueous slurry of alumina (AKP-30) and zirconia (TZ-2Y or TZ-0Y) in the range of 10-30ATZ, followed by gelation, calcination, and sintereing between $1450^{\circ}C{\sim}1550^{\circ}C$ for 2h. They showed excellent microstructure with alumina grains of <$0.5{\mu}m$ and>99% of the theoretical density. Fracture toughness of ${\sim}8MPa{\cdot}m^{1/2}$ was observed around 20ATZ which was higher than $6MPa{\cdot}m^{1/2}$ obtainable by ball-milling.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.4
• /
• pp.354-361
• /
• 2010

Soil physico-chemical properties and microbial densities are affected by organic sources and soil amendment applied to improve soil environments or quality. Generally organic fertilizer effects on forage crops yield and soil properties are partly due to changes of soil composition. We investigated the effects of swine slurry (SS), swine slurry composting-biofilteration(SCB) and chemical fertilizer(F) with gypsum(G) combinations on soil physico-chemical properties and yields of summer forage crop in the Sukmoon reclaimed tidal land in Korea. The forage crops used in this experiment were corn and sorghum$\times$sudangrass hybrid(hereafter sorghum). Our results showed that the soil physico-chemical properties in the combined (F+G, SS+G, SCB+G) treatments increased contents of organic matter and exchangeable $Ca^{2+}$, but exchangeable $Na^+$, $K^+$ and $Mg^{2+}$ reduced to 1-10% for two forage crops, compared to non-combined (F, SS, SCB) treatment. The density of soil microorganism such as bacteria, actinomycetes and fungi, increased significantly by SS+G and SCB+G treatments. This means that treatment of combined organic fertilizer with G lowered salinity levels and improved with microbial growth. The combined treatments also increased the total yields 2.3-6.2% for corn and 2.0-8.7% for sorghum, compared with non-combined treatment. This experiment suggests the combined treatments could increase the total yields of summer forage crops and change of soil physico-chemical properties in the Sukmoon reclaimed tidal land in Korea.

• KSBB Journal
• /
• v.31 no.1
• /
• pp.73-78
• /
• 2016

The aim of this study attempted to verify the possibility of bioethanol production using wasted medium density fiberboard (wMDF). In order to produce bioethanol from wood cellulosic materials must be carried out the process of pretreatment, saccharification, fermentation and distillation. First, the wMDF was pretreated using sodium chlorite and pretreated wMDF was prepared to 8% slurry and then slurry was saccharified with the commercial enzyme (Cellic CTec3). The fermentable sugar and pH of saccharified substrate were about 5.5% glucose and 4.4, respectively. Herein we compared the results of ethanol yield according to the nutrients added or without addition to increase ethanol yield. Ethanol fermentation was finished in about 24 hours, but it was delayed in experimental group without nutrients. Ethanol content and fermentation ratio of the final fermented mash prepared by utilizing jar fermenter was 25.40 g/L and 86.64%, respectively. At this time, the maximum ethanol productivity was confirmed as 1.78 g/Lh (ethanol content 21.38 g/L, 12 h), and the overall ethanol productivity was 1.05 g/Lh (ethanol content 25.27 g/L, 24 h). Using fermented liquid we could produced bioethanol 95.37% by continuous distillator packed with copper element in laboratory scale. These results show that wMDF has a potential valuable for bioethanol production.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.5
• /
• pp.352-359
• /
• 2017

The growth of nanocrystalline diamond films on a p-type poly silicon substrate was studied using microwave plasma chemical vapor deposition method. A 6 mm thick poly silicon plate was mirror polished and scratched in an ultrasonic bath containing slurries made of 30 cc ethanol and 1 gram of diamond powders having different sizes between 5 and 200 nm. Upon diamond deposition, the specimen scratched in a slurry with the smallest size of diamond powder exhibited the highest diamond particle density and, in turn, fastest diamond film growth rate. Diamond deposition was carried out applying different DC bias voltages (0, -50, -100, -150, -200 V) to the substrate. In the early stage of diamond deposition up to 2 h, the effect of voltage bias was not prominent probably because the diamond nucleation was retarded by ion bombardment onto the substrate. After 4 h of deposition, the film growth rate increased with the modest bias of -100 V and -150 V. With a bigger bias condition(-200 V), the growth rate decreased possibly due to the excessive ion bombardment on the substrate. The film grown under -150V bias exhibited the lowest contact angle and the highest surface roughness, which implied the most hydrophilic surface among the prepared samples. The film growth rate increased with the apparent activation energy of 21.04 kJ/mol as the deposition temperature increased in the range of $300{\sim}600^{\circ}C$.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.77-88
• /
• 2006

A series of model tests were performed to investigate the ground deformation during trench excavation for diaphragm walls. An apparatus was manufactured to observe the failure pattern of a slurry-supported trench in sandy ground. Ground deformations including settlement and lateral displacement of the surrounding ground adjacent to the trench were carefully monitored during excavation. Experimental observations indicated that the settlement of the adjacent ground increased with closing to the trench. Especially, the considerable settlement occurred at the distance which was equal to 40% of the excavation depth. And, the higher settlement was obtained when the relative density of ground was looser and the ground water table was higher. Also, the lateral wall face of excavated trench was bulged with lowering the slurry level In stages and then the upper part of trench failed finally. The envelope of ground surface settlement could be represented as a hyperbolic line and the measured settlement was smaller than those predicted by Clough and O'Rourke (1990).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.481-487
• /
• 2017

The purpose of this study is to develop the hybrid sound-absorbing materials that is made from organic polyurethane sponge impregnated with inorganic binder solutions. The inorganic slurry which is made from ${\alpha}$-hemihydrate gypsum mixed with 60% water, and various additives including plasticizer are used as binder. The test specimens are prepared and tested for sound absorption performance by the impedance tube methods. From the test results, noise reduction coefficient(NRC) of development materials specimen bound by the inorganic binder slurry is 0.41. They are 2 times or more higher than commercial products specimens bound by organic materials only which have NRC values in the range of 0.14 to 0.28. The polyurethane sponge specimens impregnated with inorganic gypsum slurry binder have a good balance between performance and cost, and have proper properties in density, thermal conductivity, non-combustible, and absence of harmful substances as sound-absorbing internal boards for noise barrier wall. It is apparent that the good sound absorption materials can be produced according to the optimum mix design that is recommended from this study.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.59-66
• /
• 2004

This study was conducted for a period for 5 weeks in order to evaluate effects of brewer's yeast slurry(BYS) on the growth performance, organ development and blood composition of broiler chicks. A total number of 84 one day old broiler chicks were allocated to one of three supplemented diets: 0%(control), 2% and 4% BYS. Body weight gain and feed efficiency of chicks fed the diet supplemented with 4% BYS significantly was increased by 9% and 8%, respectively, compared to the control diet(P<0.05). The BYS supplements did not affect weights of liver, heart and abdominal fat, and their ratios per body weight. However, in 4% BYS supplement group, ratio of liver to body weight significantly decreased(P<0.05) by 12%, compared to the control. The supplement of 4% BYS decreased the concentration of triglyceride by 31%, and increased the concentration of high density lipoprotein(HDL) by 26%, compared to the control(P<0.05). These results indicated that the supplementation of 4% BYS in diet can improve body weight gain as well as feed efficiency, and increased the concentration of blood HDL, and ratio of HDL to total-cholesterol of broiler chicks.