• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.27-33
• /
• 2001

The performance of the ordinary Fiber Bragg Grating(FBG) sensor strain measurement system, which uses Fabry-Perot filter for scanning wavelength, has limitation for application because of hysteresis characteristics of PZT element in the filter, slow scan rate of the filter and the high cost of system. We proposed and experimented a multiple FBG sensor system using light emitting diode(LED) as a light source and adapting Code Division Multiplexing(CDM) method to separating out individual sensor signal. Output signals for a applied static and dynamic strain and crosstalk levels between sensor signals were measured. The price of the system is very loss and the response speed is very fast. Crosstalk levels between sensor signals below - 30 dB were demonstrated.

• Journal of Chest Surgery
• /
• v.29 no.7
• /
• pp.798-801
• /
• 1996

Solitary fibrous tumors of the pleura are rare, slow-growing benign neoplasm, originating from submesothelial Hbroblasts. Approximately 80% of solitary fibrous tumors of the pleura originate in . the visceral pleura and 20% in the parietal pleura. Many of these tumors are pedunculated, attached to the visceral pleura via a well-vasculariEed stalk, and in size from 1 to 36cm with a mean of 6cm. This case report is of a 48 year old woman who presented with dyspnea and right flank pain. Preoperative chest x-ray showed increased hazy density at right lower lung field, and CT scan showed huge heterogeneous mass which was located in right mid and lower thorax. She underwent surgical resec- tion and a lOX15X loom(2200gm weigh) sized large mass was excised. Final histologic diagnosis was solitary fibrous tumor of the plara. The patient was discharged without any complications postoperately.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.125-132
• /
• 2002

We use a compound-cam twin arm structure and random tool access method to achieve a faster ATC (Automatic Tool Changer) system for the accurate position and rotation control of a tool magazine and an exchange am. Based on the data obtained from various sensors, it is possible to follow the sequence of commands in each control step for an exchange arm. However, it is not so easy to reduce the exchange time of the system because of the slow responses of the sensors and execution mode delays of PLC (Programmable Logic Controller) scan time. In this paper, we propose a new programmed limit-switch position control method to obtain the shortest possible delays for the random tool access method and compound-cam twin arm structure. With some experimental results, we have achieved below 0.9sec tool exchange time with the proposed method.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.1
• /
• pp.27-34
• /
• 2007

Objective : On the magnetic resonance image (MRI) of the infiltrating brain tumor, enhancement is usually higher in malignant tumor than in benign tumor, and tumor cells can invade into the peritumoral area without definite enhancement. In various pathological conditions, the blood brain barrier (BBB) becomes changed to pathological condition, allowing various materials extravasating into the interstitial space, and degree of enhancement is depend on the pathology. Authors performed dynamic MRI on enhancing and surrounding edematous area in order to evaluate the degrees of opening of BBB, to differentiate tumor from non-tumorous condition, and to determine its relationship with the recurrence of the tumor. Methods : Dynamic MRI was performed in 25 patients. Dynamic scans were done every 15 seconds after administration of Gd-DTPA on the enhancing and surrounding area for maximum 300 seconds, and the patterns of enhancement were ana lysed. The enhancement curve with initial steep increase followed by slow decrease was defined as "N pattern", those with initial steep increase followed by additional slow increase as "T pattern", and those with initial steep increase followed by plateau as "E pattern". Histopathological findings were compared with the dynamic scan. Results : The graphs taken from enhancing area showed "T pattern" regardless of pathology. In the surrounding area, "T pattern" was noticed in the malignant tumors, but "E pattern" or "N pattern" was noted in low-grade or benign tumors and non-tumorous condition. "T pattern" in the surrounding area was related to the malignant with tumor cell infiltration and recurrence. Conclusion : The results suggest that the malignant tumor infiltration changes the condition of BBB enough to extravasate the Gd-DTPA. Enhancement pattern in the surrounding edematous area may be a useful information to differentiate the malignant glioma with the low-grade and benign tumors or other non-tumorous conditions.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.291-306
• /
• 1995

Mandibular movement is composed of border movement and functional movement. Border movement such as maximal mouth opening, hinge opening ad lateral eccentric movement has good reproducibility, but functional movement such as chewing, swallowing and speech has also reproducibility. Especially for chewing movement, individual reproducibility has been confirmed by many studies. Study of chewing pattern is still in controversy. In new approach for raising the diagnostic value, numeric parameters and morphologic characteristics could be used for evaluation of chewing pattern. This study was performed to investigate the differences between chewing pattern in controls and in patients with temporomandibular disorders. Sixty-three patients with temporomandibular disorders participated in this study, and they were divided into unilaterally affected subjects or bilaterally affected subjects. Then unilaterally affected subjects were classified into closed lock group, disk displacement with reduction group, and degenerative joint disease group. For recording of chewing pattern, subjects were asked to chew one piece of presoftened chewing gum on both sides, and the chewing movement was recorded with the Electrognatho- Graphy(Bio-Research Associates Inc., U.S.A.). Tooth contact pattern for occlusal stability (Total left-right statistics )was also recorded with T-Scan(Tekscan Co., U.S.A.). The dta related to chewing pattern and total left-right statistics were statistically analyzed by SAS/stat program. The obtained results were as follows : 1. In patient group, mean value of A-P distance and the ratio of A-P distance to vertical distance were larger than control group, but the value of lateral distance in affected side and the closing velocity in unaffected side were smaller than that of control group, respectively. 2. In case of unilateral affected patients, chewing pattern of other side had tendency to restricted movement and slow velocity in closed lock group or degenerative joint disease group than control group or disk displacement with reduction group. 3. In bilateral degenerative joint disease patients, contralateral side had tendency to large range of motion and slow chewing velocity than preferred chewing side. 4. The patients with restricted mouth opening below than 35mm had higher value of total left-right statistics than patient group mouth opening above 35mm. Also closed lock group had higher total left-right statistics than disk displacement with reduction group, degenerative joint disease group and control group. 5. There was some difference in morphologic characteristics of chewing pattern between in control group and in affected side of unilateral patient group, but no difference between control group and unaffected side of unilateral patient group. 6. There were positive correlations between vertical distance and A-P distance, between vertical distance and chewing velocity, between A-P distance and chewing velocity, and between opening velocity and closing velocity in unilateral affected patients.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.9
• /
• pp.68-75
• /
• 2007

The pitch and orthogonality of two-dimensional (2D) gratings have been measured by using a metrological atomic force microscope (MAFM) and measurement uncertainty has been analyzed. Gratings are typical standard artifacts for the calibration of precision microscopes. Since the magnification and orthogonality in two perpendicular axes of microscopes can be calibrated simultaneously using 2D gratings, it is important to certify the pitch and orthogonality of 2D gratings accurately for nano-metrology using precision microscopes. In the measurement of 2D gratings, the MAFM can be used effectively for its nanometric resolution and uncertainty, but a new measurement scheme was required to overcome some limitations of current MAFM such as nonnegligible thermal drift and slow scan speed. Two kinds of 2D gratings, each with the nominal pitch of 300 nm and 1000 nm, were measured using line scans for the pitch measurement of each direction. The expanded uncertainties (k = 2) of measured pitch values were less than 0.2 nm and 0.4 nm for each specimen, and those of measured orthogonality were less than 0.09 degree and 0.05 degree respectively. The experimental results measured using the MAFM and optical diffractometer were coincident with each other within the expanded uncertainty of the MAFM. As a future work, we also proposed another scheme for the measurements of 2D gratings to increase the accuracy of calculated peak positions.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.3
• /
• pp.215-219
• /
• 2012

Cemento-ossifying fibroma (COF) is a benign fibro-osseous tumor with fibrous tissue, abnormal cement and bone, or a combination of such elements. These are slow-growing lesions and are more frequent in women. Here, we report the case of a 28-year-old Korean woman. The patient having no underlying disease complained about facial swelling and asymmetry. A firm mass with impacted molars and teeth deviation on the right maxilla was observed. A computed tomography scan was taken and an incisional biopsy was performed. Following this, COF was diagnosed. Complete surgical removal of the lesion was carried out. A post-operative follow-up was conducted and 3 months later the patient reported no discomfort or any sign of recurrence in regards to the lesion. Differential diagnosis with fibrous dysplasia and the COF is important because of the treatment choice. We report a case of COF and offer a review of the literature on this article.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.473-477
• /
• 2010

Organized hematoma of the maxillary sinus is a rare, nonneoplastic benign lesion with locally destructive behavior that may mimic a malignancy. Clinically, symptoms do not usually occur while the lesion remains localized to the maxillary sinus. Because there is gradual enlargement of the lesion causing erosion and displacement of the adjacent bony structures, symptoms such as epistaxis, cheek swelling, nasal obstruc-tion, headache, and exophthalmos become manifest. Radiologically, unilateral cases are much more fre-quent than bilateral, and Waters' view shows complete opacity of the expanded maxillary sinus and some masses. CT scan shows a large heterogeneous enhancing mass causing considerable expansion of the max-illary sinus with bony erosion. On MR imaging, the mass usually has a variable signal intensity on T1- and T2- weighted images, ranging from low to high. After contrast administration, discrete areas of enhance-ment are present within the mass. Although the disease is essentially benign and nonneoplastic, differen-tial diagnosis from neoplastic disease including malignancy both clinically and radiologically has been always problematic. Accurate preoperative diagnosis of organized hematoma of the maxillary sinus is important to avoid unnecessary extensive surgery, because this condition is curative with a simple, conservative surgical approach and rarely recur. Organized hematoma of the maxillary sinus should be included in the differential diagnosis when patients have recurrent epistaxis, slow-growing mass of the cheek, nasal obstruction, and expansile mass in the maxillary sinus. A 33-year-old man was referred to the department of oral and maxillofacial surgery with a three-month history of slowly growing painful swelling of the left cheek. The mass of the maxillary sinus was resected by a Caldwell-Luc approach. Histopahtoly showed only a fibous encapsulated organized hematoma. To our knowledge, organized hematoma of the maxillary sinus has not been previously described in the Korean literature of the oral and maxillofacial surgery. We report a case of organized hematoma of the maxillary sinus presenting with an enlarging maxillary sinus mass.

• Journal of Chest Surgery
• /
• v.42 no.3
• /
• pp.396-400
• /
• 2009

Operations using the da Vinci robot have performed in for many surgeries, but the adoption of robotics to general thoracic surgery has been slow. The patient (age 74, male) visited our hospital complaining of hiccups and dysphagia. The CT scan and endoscopic biopsy revealed esophageal cancer (squamous cell carcinoma). We performed transthoracic esophagectomy using a da Vinci robot and this was followed by gastric tube mobilization via laparoscopy. Cervical esophago-gastric anastomosis was done using the hand-sewn method. The gastric tube was brought into the neck through the retrosternal route. The patient was discharged without any complications. We report here on a case of successful da Vinci robotic esophgagectomy.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.49-57
• /
• 2009

The camera electronics in the KOMPSAT-3 payload provides the several control clocks in order to move the charges, which are converted from the light in the pixel, in the vertical and horizontal direction. Generally, the control clocks depend on the CCD internal design in the system. The KOMPSAT-3 payload uses the CCD controlled by 3-phase vertical clocks and 4-phase timing. The camera generates the various clocks such as the vertical clocks, the horizontal clocks, the summing clocks, the reset clocks and so on. The vertical clocks are deeply related to the camera performance and synchronized with satellite scan-rate even though they are relatively slow. Also, it gives the horizontal clocks without distortion under the very fast pixel-rate. This paper shows the design and simulation of the CCD clocks driver for the KOMPSAT-3 payload.