• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.169-175
• /
• 2006

In this paper, a microstrip patch antenna with the T-shaped slits is designed and fabricated for GPS. The resonant frequency of the microstrip patch antenna with the slits is lower than that of a microstrip patch antenna without the slits so it can be reduced the size of patch. In order to calculate resonant frequency of the microstrip patch antenna with the slits, the resonant frequency formulas are derived from the surface current distribution on microstrip patch antenna. Using the Ensemble 6.0 simulation tool, the accuracy of approximate equations is verified. The microstrip patch antenna with the slits is designed by using these equations. The size of the designed antenna with T-shaped slits can be reduced to 29% compared with that without the slits. The microstrip patch antenna with slits have a very narrow bandwidth. In order to improve the narrow bandwidth of microstrip patch antennas with the slits, a microstrip patch antenna with rectangular slot is proposed. As the result of the measurements, the resonant frequency of the proposed microstrip patch antenna with the T-shaped slits is 1.575GHz and the bandwidth is about 50MHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.103-109
• /
• 2006

In this paper, single-feed equilateral triangular microstrip antennas(ETMA) for circular polarization(CP) are designed and studied experimentally. It is demonstrated that by embedding a narrow slot or a cross of unequal slot lengths in the triangular patch circularly polarized radiation RHCP(right-hand circularly polarized wave), LHCP(left-hand circularly polarized wave) of microstrip antennas can easily be achieved using by strategically positioned coaxial single probe feed. And the size of a triangular microstrip patch antenna is smaller than that of a conventional rectangular or circular patch at a given frequency. A single-feed ETMA with a horizontal narrow slot is printed on the substrate of 60 mils thick and the other ETMA with a corss slot of unequal slot lengths is printed on the same substrate. The antenna radiation characteristics are calculated by ENSEMBLE(Ver. 5.0) software, and compared with the experimental results. This results show that the antenna size reduction of about $17%{\sim}2l%$ is obtained as compared to the regular-size CP design.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.484-491
• /
• 2013

In this paper, the method of designing a wideband antenna has been introduced through the design technique that simultaneously employs L- and slot-type feeds. Using the two kinds of feeds and additional fence structure, a compact wideband patch antenna has been realized. The size of the patch has been reduced by about 30 % based on the low frequency(824 MHz) and the full fractional bandwidth is wider than 100 %. The L-feed element is for the EM coupling feeding at the low frequency, while it functions as a feeding line for the power coupling through the slot at the high frequency. The proposed antenna has been designed not only for wideband operations but also for a proper array element with a reduced size. Thus, the foundation for developing the ultra wideband patch array antennas has been prepared. The fabricated antenna has been found to have good characteristics on V.S.W.R and the radiation patterns over the full bands. The experimental and computed results are shown to be in good agreement.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.793-799
• /
• 2018

An improved design of Ultra Wide Band(UWB) Bow-Tie antenna, which can control an enhanced wide stop-band, is presented. The mutually coupled slot-pair improves and controls the rejection band. The UWB antenna is composed of an electromagnetically coupled Bow-Tie patch and a parasitic ground patch, whose working frequency is extended to full UWB range in this work. By adding slot-pairs on the main patch and optimizing, they can give any requested wide rejection bands and sharp skirt characteristics, as is often required for UWB antennas and multi-band antennas. All the parameters are precisely calculated by an adequate optimization method. The Particle Swarm Optimization(PSO) technique is appropriately adopted. The proposed design and method is proved to give and control the sharp-skirt wide stop-band to UWB Bow-Tie antennas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.25-30
• /
• 2024

The modern society has become full-fledged entry into the information age since spread of Internet. In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, efficiency and performance of 2.4GHz band which leads to saturation of the communication was significantly fall. Accordingly, the communication of the 5GHz band came to be interested. In this paper, we studied the design and fabrication of u-slot microstrip patch antenna to be used in wireless communication systems operating at around 5GHz band. To obtain antenna parameters such as patch size, inter patch space, antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, u-slot microstrip antenna is fabricated using FR-4 substrate of dielectric constant 4.4. The characteristics of fabricated antenna were analyzed by network analyzer.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.616-618
• /
• 2009

In this letter, a novel hybrid planar inverted-F antenna (PIFA) with a T-shaped slot on the ground plane is proposed. The loop structure formed by the feed line and shorting pin can be operated as a series and shunt inductance for the PIFA and the T-shaped slot antenna, respectively. The PIFA operates at a frequency of 1.75 GHz, while the T-shaped slot on the ground plane operates at 2.4 GHz by the same voltage feeding source. The height of the PIFA is 6.5 mm, and the size of an upper patch is designed to be 30 mm${\times}$16 mm. The measured relative impedance bandwidth of the PIFA and the T-shaped slot are about 12% and 21%, respectively. In addition, good antenna performance was achieved.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1070-1076
• /
• 2007

In this paper, we study the characteristics of dual band microstrip antenna with the wedge-shaped radiation patch added the slot using air substrate. Wedge-shaped patch antenna with air substrate is avoided the large probe reactance associated with a thick substrate owing to the use of short probe and good impedance matching over a wide frequency range can be obtained. Slot on the antenna radiator varies the reactance component according to the employed frequency and affect the resonance freaqency of the antenna, therefore the antenna can resonate at the dual band(cellular and PCS band). The slot length and position have an effect on the bandwidth and input impedance of the antenna are optimized by simulation. From the experiment results for the fabricated antenna, -10 dB of $S_{11}$ is content with the allocated bandwidth of Cellular and PCS system and - 15 dB of cross polarization level. From the results of this paper, it has been confirmed that the proposed antenna can be used as the base station antenna fur Cellular and PCS band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.41-46
• /
• 2019

This paper is analysis on usefulness of Microstrip patch antenna design using Taguchi's Orthogonal array. For comparison, the shape of U-slot and Feed line elements are decided as a parameter in Microstrip patch antenna. And all the possible result of 19,683 times simulation using parameter sweep and the result of Taguchi's orthogonal arrays are compared. The simulation of Parameter sweep and Orthogonal arrays has 3.7% error on 10dB Bandwidth. Finally, It is identified that 19,683 times parameter sweep simulation can be reduced to 27 times with Taguchi's orthogonal arrays but still it represents antenna parameter characters well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.63-70
• /
• 2012

This paper discussed on the directive gain improvement method of the U-type ultra wide-band(UWB) planar patch antenna model with CPW feeding. For directive gain improvement, the U-type printed patch antenna model with CPW feeding is reconstructed as a microstrip structure by adding a reflection plane with aperture slot. The reflection coefficient of the reconstructed antenna is less than -6.5 dB(VSWR < 3.3) to the characteristic impedance of $50.08{\Omega}$ and showed the directive radiation patterns with the directive gain of 7.5 dBi ~ 10.1 dBi, the front-back ratio of 17.8 dB ~ 28.7 dB and the range of -3dB radiation angle over ${\pm}30^{\circ}$ to the main beam direction of ${\theta}=0^{\circ}$.