• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1269-1279
• /
• 2021

Geostationary Ocean Color Imager II (GOCI-II), which are now operated successfully since its launch in 2020, acquires local area images with 12 Level 1B slot images that are sequentially acquired in a 3×4 grid pattern. The boundary areas between the adjacent slots are prone to discontinuity in radiance, which becomes even more clear in the following Level 2 data, and this warrants the precise analysis and correction before the distribution. This study evaluates the relative radiometric biases between the adjacent slots images, by exploiting the overlapped areas across the images. Although it is ideal to derive the statistics from humongous images, this preliminary analysis uses just the scenes acquired at a specific time to understand its general behavior in terms of bias and variance in radiance. Level 1B images of February 21st, 2021 (UTC03 = noon in local time) were selected for the analysis based on the cloud cover, and the radiance statistics were calculated only with the ocean pixels. The results showed that the relative bias is 0~1% in all bands but Band 1 (380 nm), while Band 1 exhibited a larger bias (1~2%). Except for the Band 1 in slot pairs aligned North-South, biases in all direction and in all bands turned out to have biases in the opposite direction that the sun elevation would have caused.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.468-471
• /
• 2010

A compact square patch antenna with reconfigurable circular polarization (CP) at 2.4 GHz is proposed. Circular polarization is generated by an arc-shaped slot on the ground plane. In order to switch the CP orientation, the current flow direction of the patch is reconfigured via the PIN diodes mounted on the slot. As the slot and bias circuit are not placed on the patch side, the proposed antenna radiates a CP wave without alteration in the main beam direction. From the experimental results, the impedance and CP bandwidths of the proposed antenna have been demonstrated for up to 80 MHz and 25 MHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.156-162
• /
• 2016

This paper proposes a novel orthogonally-polarized dual-band switchable microstrip antenna. The proposed antenna consists of a perpendicular feeding network and an radiator with a PIN-installed H-shaped slot. When the states of one single PIN diode in H-slot are controlled by bias voltages, the controlled physical geometry of the H-slot determines the operation frequencies of switchable 1.80 GHz and 2.43 GHz for vertically polarized linear polarization and fixed 2.06 GHz for horizontally linear polarization. The implemented antenna experimentally demonstrates reconfigurable dual-band capability by means of controling the states of the PIN diode. The simulation and measurement results of the implemented antenna have been in good agreement with the reflection coefficients, realized antenna gains and far-field radiation patterns at each of the PIN diode states.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.429-434
• /
• 2004

In this paper, we designed a reconfigurable slot antenna using sequentially voltage-applied RF MEMS switches. In order to obtain pull-in voltage and maximum stress of the MEMS switches, the switch structures in accordance with airgap height was analyzed by ANSYS simulation A actuation voltage of MEMS switches can be determined by switch geometry and airgap height between a movable plate and a bottom plate. The designed lengths of MEMS switches were 240 $\mu\textrm{m}$, 320 $\mu\textrm{m}$, 400 $\mu\textrm{m}$, respectively and the airgap was 6$\mu\textrm{m}$. The total size of the designed slot antenna was 10 mm x 10 mm and the slot length and width were 500 $\mu\textrm{m}$ and 200 $\mu\textrm{m}$, respectively. The length and size of the CPW feedline were 5 mm and 30-80-30 $\mu\textrm{m}$, respectively. and then the size of the CPW in the slot was 50-300-150 $\mu\textrm{m}$. The tuning of the resonant frequency of the proposed device is realized by varying the electrical length of the antenna, which is controlled by applying the DC bias voltages to the RF MEMS switches. The designed slot antenna has been simulated, fabricated and measured.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.46-52
• /
• 2010

A compact circular microstrip patch antenna with a switchable circular polarization(CP) is proposed at 2.4 GHz. An unequal cross-shaped slot on a ground plane is utilized as a perturbation. By switching pin diodes mounted on the slot, the CP sense of each antenna can be simply switched from left-handed(LH) CP to right-handed(RH) CP vice versa. Since the perturbation can be made on the ground plane and no bias circuit is required on the patch side, the bias circuit has not effect on the main beam radiation. From the experimental results, the impedance bandwidth and CP bandwidth of the proposed antenna have shown up to 150 MHz and 35 MHz, respectively. The peak gain of the proposed antenna is 1.7 dBi for both CP senses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.13-21
• /
• 1997

In this paper, the oscillator type active antenna used as an element of active phased array antenna is designed and fabricated using slot coupling. The radiating element and active circuit are fabricated on each layer respectively and coupled electromagnetically through slot on the ground plane. This structure can solve the problems such as narrow bandwidth of microstrip antenna, spurious radiation by active circuits, and spaces for integration of the feeding circuits which are caused by integrating antennas with oscillator circuits in the same layer. The active antenna in this paper, the oscillation frequency can be tuned linearly by controlling the drain bias voltage of FET. The frequency tuning range is between 12.37 GHz to 12.65 GHz when bias voltage is varied from 3V to 9V, thus frequency tuning bandwidth is 280 MHz (2.24%). The output power of antenna is uniform within 5dB over frequency tuning range. Therefore this active antenna can be used as an element of linear or planar active phased array antennas.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.216-222
• /
• 2012

This paper presents a single-pole eight-throw switch, based on an eight-way power divider, using substrate integrate waveguide(SIW) technology. Eight sectorial-lines are formed by inserting radial slot-lines on the top plate of SIW power divider. Each sectorial-line can be controlled independently with high level of isolation. The switching is accomplished by altering the capacitance of the varactor on the line, which causes different input impedances to be seen at a central probe to each sectorial line. The proposed structure works as a switching circuit and an eight-way power divider depending on the bias condition. The change in resonant frequency and input impedance are estimated by adapting a tapered transmission line model. The detailed design, fabrication, and measurement are discussed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.79-85
• /
• 2004

In this paper, the RF-ID system for ubiquitous tagging applications has been designed, fabricated and analysed. The RF-ID System consists of passive RF-ID Tag and Reader. The passive RF-ID tag consists of rectifier using zero-bias schottky diode which converts RF power into DC power, ID chip, ASK modulator using bipolar transistor and slot loop antenna. We suggest an ASK undulation method using a bipolar transistor to compensate the disadvantage of the conventional PIN diode, which needs large current Also, the slot loop antenna with wider bandwidth than that of the conventional patch antenna is suggested The RF-ID reader consist of patch array antenna, Tx/Rx part and ASK demodulator. We have designed the RF-ID System using EM and circuit simulation tools. According to the measured results, The power level of modulation signal at 1 m from passive RF-ID Tag is -46.76 dBm and frequency of it is 57.2 KHz. The transmitting power of RF-ID reader was 500 mW

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.85-91
• /
• 2010

In this paper, a new microstrip antenna using asymmetric U-shaped slotted ground is proposed for a switchable circular polarization sense. The proposed antenna is achieved a circularly polarization from orthogonal E-field distributions with 90 degree phase difference due to the asymmetrical U-shaped slot. Moreover, the circular polarization sense of the proposed antenna can be easily switchable with changing the symmetric plane of the U-shaped slots. As a result, the proposed antenna is implemented by two PIN diodes with two different bias condition for ON/OFF states. The measured axial ratios are about 1.5 dB without the dependence of the polarization sense and 3-dB axial ratio bandwidth are achieved 29 MHz with respect to about 1.2 % at 2.46 GHz operating frequency.

• Journal of KIISE
• /
• v.44 no.8
• /
• pp.803-812
• /
• 2017

T-commerce is technology-fusion service on which the user can purchase using data broadcasting technology based on bi-directional digital TVs. To achieve the best revenue under a limited environment in regard to the channel number and the variety of sales goods, organizing broadcast programs to maximize the expected sales considering the selling power of each product at each time slot. For this, this paper proposes a method to predict the sales of goods when it is assigned to each time slot. The proposed method predicts the sales of product at a time slot given the week-in-year and weather of the target day. Additionally, it combines a statistical predict model applying SVD (Singular Value Decomposition) to mitigate the sparsity problem caused by the bias in sales record. In experiments on the sales data of W-shopping, a T-commerce company, the proposed method showed NMAE (Normalized Mean Absolute Error) of 0.12 between the prediction and the actual sales, which confirms the effectiveness of the proposed method. The proposed method is practically applied to the T-commerce system of W-shopping and used for broadcasting organization.