• ETRI Journal
• /
• 제40권5호
• /
• pp.561-569
• /
• 2018

Modern communication systems employ wideband antennas with circular polarization (CP) radiation. In this work, asymmetric modified bow-tie (ABT) and symmetric modified bow-tie (SBT) slotted circularly polarized single-point probe-fed circular patch antennas with dimensions of $40mm{\times}40mm$ for wideband applications are proposed. A 10 dB RL bandwidth of 350 MHz with CP, 3 dB axial ratio (AR) bandwidth of 100 MHz, peak gain of 4.9 dBic, and 10 dB RL bandwidth of 530 MHz with CP, 3 dB AR bandwidth of 140 MHz, peak gain of 5 dBic are obtained for ABT and SBT slotted circular patch antennas, respectively. The proposed SBT slotted patch is scaled up and down to $50mm{\times}50mm$ and $30mm{\times}30mm$, respectively. The proposed scaled-up version offers 10 dB RL and 3 dB AR bandwidths of 340 MHz and 80 MHz, with a peak gain of 5 dBic. The scaled-down version offers 10 dB RL and 3 dB AR bandwidths of 710 MHz and 180 MHz, with a peak gain of 5.25 dBic. These prototypes are suitable to work in IEEE 802.11a WLAN, ISM, and IEEE 802.11ac applications. The measured and simulated results are then discussed and compared.

• Journal of electromagnetic engineering and science
• /
• 제12권2호
• /
• pp.176-184
• /
• 2012

In this paper, the effects of a metal plane on the performance of a meandered slot RFID antenna are evaluated in a real environment, and 3 metal plane cases are considered (the most likely scenarios in which metal conductive materials are placed near the tag antenna). The metal plane effects can be categorized as matching degradation and antenna gain variation. First, matching degradation due to the antenna's induced mutual impedance is experimentally investigated. In addition, the gain variation is investigated to figure out the change in the radiation characteristics. With the derived antenna parameters, the read range is calculated with the Friis transmission equation and measured to analyze the effects of a metal plane on RFID system performance. The calculated and measured read range varies from 9.3 m to 19.1 m as the distance between the RFID antenna and the metal plane changes.

• 한국정보통신학회논문지
• /
• 제7권8호
• /
• pp.1598-1603
• /
• 2003

위성방송 수신용 마이크로스트립 안테나를 설계하고 이를 제작하여 안테나 성능을 측정하였다. 마이크로스트립 패치 모양은 Sierpinski 프랙탈 구조를 가지는 정삼각형 패치를 이용하였고 안테나 구조는 다층의 SSFIP(slot­strip­foam­inverted patch) 구조를 이용하였다. Sierpinski 프랙탈 구조가 가지는 특징을 이용하여 원형 편파 발생을 위한 sequential 회전 기법을 적용하였으며, 이를 기본 안테나로 하여 8${\times}$2 배열 안테나로 확장하였다. 제작된 안테나의 반사계수와 방사패턴의 측정 결과 시뮬레이션 결과와 비슷한 결과를 얻었다.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.43-49
• /
• 2013

In this paper, it is designed inverted triangle structural planar monopole antenna with edge and rectangle slot for UWB(Ultra Wide Band) communication (3.1~10.6 GHz) and researched in about 5.8 GHz notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. and rectangle form addition planned notch slot of 1 mm and height 0.1 mm. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r$=4.4, and the size is $20{\times}20{\times}1.6$ mm dimension. The measured results that are obtained return loss under -10 dB through 3.1~10.6 GHz(7.5 GHz) without Wi-Fi bandwidth and maximum gain of 8.44 dBi at E-plane. Radiation pattern is about the same that of dipole antenna at all frequency. And using notch slot and it will be able to confirm the quality which becomes notch from 5.8 GHz which are a radio LAN frequency range.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• 한국전자파학회논문지
• /
• 제13권5호
• /
• pp.468-474
• /
• 2002

본 논문에서는 접지면에 원형 슬롯이 있는 양팔 마이크로스트립 스파이럴 안테나를 제안하였다. 제안한 안테나는 별도의 발룬(balun)회로 없이 평면 구조로 구현하였으며 하나의 안테나의 구조로부터 주빔이 안테나 평면에서 수직한 일반 스파이럴 안테나의 복사특성과 주파수 변화에 따라 주빔이 $\theta$와 $\phi$ 방향으로 일정하게 변하는 편심 스파이럴 안테나의 복사특성을 동시에 얻을 수 있다. 원형슬롯의 반지름이 23 mm일 때 2.5 GHz에서 3.3 GHz까지의 주파수 영역에서는 주빔이 안테나 평면에 대해 수직한 방향을 유지하며 그 이후 주파수가 증가함에 따라 주빔이 일정하게 기우는 편심 스파이럴 안테나의 특성을 가진다.

• 한국통신학회논문지
• /
• 제14권5호
• /
• pp.435-441
• /
• 1989

링 급전 선로를 이용해서 두 slot 사이 공진 길이를 lambda/2혹은 로 한 한 3개의 Rectangular Microstrip Patch Antenna를 배열하고 제작하여 방사 패턴 특성을 고찰 했다. 링 급전 선로를 이용한 공진길이 lambda/2인 3개의 Rectangular Microstrip Patch Antenna의 경우 각 Patch Antenna 소자 방향에서 방사 패턴이 고찰되고, 공진 길이 lambda/인 3개의 Rectangular Microstrip Patch Antenna의 경우 각 Antenna소자 사이에서 방사 패턴이 고찰 되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.262-265
• /
• 2003

Radiofrequency thermal ablation (RTA) as one of the microwave hyperthermia is becoming the treatment of choice for small but inoperable tumors of the liver. In this paper, we designed the applicator composed of semi-rigid coaxial cable antenna with a ring slot for RTA. To optimize the maximum output of radiation at 2450 MHz, we simulated the antenna using Electromagnetic simulation tools Maxwell program and analyzed the return loss and the electric field $E_{tot}$ at the near-field region between the simulation results and measurement results. As a result, we obtained the return loss of -29.786 dB at 2450 MHz when the antenna was placed between two blocks of a pig's liver, and the measurement results agreed with the simulation results well. Therefore, this semi-rigid coaxial cable antenna with a ring slot can be used very usefully as the applicator for RTA.r RTA.A.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.48-54
• /
• 1995

Dielectrically filled parallel-plate waveguide with finite number of periodic slots in its upper plate as a leaky wave antenna is analysed for E-polarization case. The integro-differential equation whose unknown is the slot equivalent magnetic current over the slot is formulated and solved by use of Galerkin's method. From knowledge of the equivalent magnetic current, the propagation constant and radiation pattern for the finite periodic structure are determined and compared with the results of the infinite case. Good correspondence between them is observed.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.511-514
• /
• 2003

In this paper, describes the design of PIFA for PDA which has parasitic patch to expand the impedance bandwidth and miniaturization technique to consider the radiation pattern. To expand the impedance bandwidth, generated resonant frequency of parasitic patch is different from that of main patch. To miniaturize the physical dimension, using the folded edge and rectangular slot. The obtained impedance bandwidth is 9.4% ($2.29GHz{\sim}2.515GHz$) at VSWR${\leqq}$2 and antenna gain is 2dBi within the operating frequency.