• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.89-95
• /
• 2012

This study was conducted to provide basic information for conservation and restoration through investigation of vegetation structure on the Euchresta japonica Hook. f. ex Regel (Korean endangered species) in Mt. Halla in Jeju Island. Very few individuals were discontinuously distributed and restricted at 220 m above sea level, very steep slope ($40-50^{\circ}$), rocky area of north face of Donneko Valley. For investigation of environmental condition, we established $10{\times}20\;m$ quadrat and one control $20{\times}20\;m$ quadrat in the habitats. Thirty three species were found at habitat under 10-16 m Castanopsis sieboldii tree layer (70-80%). The principal causes of threat which were investigated in this study are competition among companies, very steep slopes, artificial management of valley. For restoration and conservation of habitats, it is needed to suitable plans.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.2
• /
• pp.51-58
• /
• 2015

10 years ago, in Sijeon-ri, Dogo-myeon, Asan-si, the existing stream was repaired to develope Mt. Dogo trail and irrigation systems through road expansion pavement construction and small stream repair construction. The trees such as persimmon and willow are eliminated that rowed on both sides of the stream and dredging work to dig the rock and sand have been performed. As a result, wide asphalt road was built, also flood damage worries were reduced. 10 years passed and now, how did local residents think about the stream repaired before and after? Village residents, public officials, and the stream construction engineer were interviewed. Villagers indicated a problems that brook became a place where water peppers were taking over and water was stagnating due to the slow velocity so nothing could live and natural landscape like a wash place and the cascade disappeared, because rock and sand were taken out brought soil into the brook. Public officials and engineers were aware of the problems at the time of the stream. Now that construction is completed after 10 years, Both realistically and budgetary to restoration would be difficult. However, it is necessary to seek for waterfront space which can be restored or replaced by a part of the stream like similarly before. In addition, it is necessary to restore to the progression of a natural stream which connect with stairs(or slope) - small waterfalls - pools - wash place. In this paper, we hope to take a lesson from the Sijeon-ri model and make rural stream construction be prepared with consideration about not only distinct characteristics of specific area but also the opinion of local resident.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.81-89
• /
• 2010

This study was conducted to evaluate the effects of early revegetation by analyzing the characteristics of germination and growth of Chrysanthemum zawadskii using vegetation-plant in rock slopes. After making up a growing basis of approximately 20-cm depth and 10-cm diameter by using a boring machine, the surface of rock slopes was planted with vegetation-plant. The number of germinating populations by soil media was 41 in H.s, 4 in T.s, 3 in M.s, and 0 in M.g.s. The germination rate (%) by soil media was 20.0% in H.s, 3.3% in T.s, 2.5% in M.s and 0% in M.g.s. In monthly changes of growth rate, the aspect was northwest direction, the soil media was H.s, and the treatment was microorganism plot. The main factors affecting survivorship and growth of population were soil media and treatment plot. The interaction between each factor had a good effects in bearing x treatment plot, soil media x treatment plot. but, it is recommended that the mulching of vegetation plant is highly needed to help the germination of seed and growth of vegetation because of loss of seed and soil media occurred due to rainfall. Therefore, The result suggests that the revegetation technique using boring in rock slope was very efficient in respect of the early revegetation and the landscape.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.161-172
• /
• 2010

As the interest on biodiversity has increased around the world, researches about evaluating potential for habitat are also increasing to find and comprehend the valuable habitats. This study focus on comprehending the significance of stream in evaluating habitat's potential. The purpose of this study is to evaluate habitat potential with applying stream as a main variable, and to comprehend the relationship between the variables and habitat potential. Basin is a unit that has hydrological properties and dynamic interaction with ecosystem. Especially, biodiversity and suitability of habitat in basin area has direct correlation with stream. Existing studies also are proposing for habitat potential evaluation in basin unit, they applied forest, slope and road as main variables. Despite stream is considered the most important factor in basin area, researchers haven't applied stream as a main variable. Therefore, in this study, three variables that can demonstrate hydrological properties are selected, which are, riparian distance, stream order and land use disturbance, and evaluate habitat potential. Habitat potential is analyzed by using Maxent (Maximum entropy model), and vertebrate's presence data is used as dependent variables and stream order map and land cover map is used as base data of independent variables. As a result of analysis, habitat potential is higher at riparian and upstream area, and lower at frequently disturbed area. Result indicates that adjacent to stream, upstream, and less disturbed area is the habitat that vertebrate prefer. In particular, mammals prefer adjacent area of stream and forest and reptiles prefer upriver area. Birds prefer adjacent area of stream and midstream and amphibians prefer adjacent area of stream and upriver. The result of this research could help to establish habitat conservation strategy around basin unit in the future.

• Restorative Dentistry and Endodontics
• /
• v.26 no.6
• /
• pp.464-484
• /
• 2001

When restoring a tooth, the dentist tries to choose the ideal material for existing situation. One criterion that is considered is its suitability for restoring coronal strength. As more tooth structure is removed, the cusps are weakened and susceptible to fracture. Further, this increased deformation may cause the formation of intermittent gaps at the margin between the hard tissue and the restoration, facilitating marginal leakage. The improvements in ceramic materials now make it possible for alternatives to amalgams, composites, and cast metal to be of offered for posterior teeth. Of the materials used, ceramics most closely approximates the properties of enamel. The introduction of computer-aided design/computer-aided manufacture(CAD/CAM) systems to restorative dentistry represents a major technological breakthrough. It is possible to design and fabricate ceramic restorations at a single appointment. Additionally, CAD/CAM systems eliminate certain errors and inaccuracies that are inherent to the indirect method and provide an esthetic restoration. The aim of this investigation was to study the loading characteristics of CAD/CAM ceramic inlay and to compare the stress distribution and displacement associated with different designs of cavity(the isthmus width and cavity depth). A human maxillary left first premolar was prepared with standard mesio-occlusal cavity preparation, as recommended by the manufacturer Ceramic inlay was fabricated with CEREC 2 CAD/CIM equipment and cemented into the prepared cavity. Three dimensional model was made by the serial photographic method. The cavity width was varied $\frac{1}{3}$, $\frac{1}{2}$ and $\frac{2}{3}$ of intercuspal distance between buccal and lingual cusp tip. The cavity depth was varied 1.5mm and 2.3mm. So six models were constructed to simulate six conditions. A point load of 500N was applied vertically onto the first node of the lingual slope from the buccal cusp tip. The stress distribution and displacement were solved using ANSYS finite element program(Swanson Analysis System). (omitted)

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.19-27
• /
• 2009

This study was carried out to obtain the basic model to estimate damage degree from the correlation analysis between forest fire and site environment factors and to clarify the restoration trends thorough multi-temporal survey by observing species diversity followed by various treatments at damaged forest area over time. From the derived model, the damage degree of forest fire was higher in the area of dense coniferous stands composed of simple story at the elevation of about 100m and 200m, and on steeper slope area over 30 degree. As results of this study, fire damaged trees are needed to cut down and a mixed stand with deciduous and coniferous species from the same area is desirable for the future species composition on fire damaged forest. Thus, site characteristics, local species, and mixed stands are the main consideration to enhance the vegetation recovery.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.6
• /
• pp.125-135
• /
• 2020

The uncontrolled urban expansion causes various social, economic problems and natural/environmental problems. Therefore, it is necessary to forecast urban expansion by identifying various factors related to urban expansion. This study aims to forecast it using a decision tree that is widely used in various areas. The study used geographic data such as the area of use, geographical data like elevation and slope, the environmental conservation value assessment map, and population density data for 2006 and 2018. It extracted the new urban expansion areas by comparing the residential, industrial, and commercial zones of the zoning in 2006 and 2018 and derived a decision tree using the 2006 data as independent variables. It is intended to forecast urban expansion in 2030 by applying the data for 2018 to the derived decision tree. The analysis result confirmed that the distance from the green area, the elevation, the grade of the environmental conservation value assessment map, and the distance from the industrial area were important factors in forecasting the urban area expansion. The AUC of 0.95051 showed excellent explanatory power in the ROC analysis performed to verify the accuracy. However, the forecast of the urban area expansion for 2018 using the decision tree was 15,459.98㎢, which was significantly different from the actual urban area of 4,144.93㎢ for 2018. Since many regions use decision tree to forecast urban expansion, they can be useful for identifying which factors affect urban expansion, although they are not suitable for forecasting the expansion of urban region in detail. Identifying such important factors for urban expansion is expected to provide information that can be used in future land, urban, and environmental planning.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.133-144
• /
• 2021

This study aims to estimate location of land mammals habitat by analyzing spatial data and investigate how to apply environmental DNA monitoring methodology to lotic system in Yangpyeong-gun, Gyeonggi-do. Environmental DNA sampling points are selected through spatial analysis with QGIS open source program by overlaying Kernel density of wild boar(Sus scrofa), elevation, slope and land-cover map, and 81 samples are collected. After 240 mL of water was filtered in each sample, metabarcoding technique using MiMammal universal primer was applied in order to get a whole list of mammal species whose DNA particles contained in filtered water. 8 and 22 samples showed DNA of wild boar and water deer, respectively. DNA of raccoon dog, Eurasian otter, and Siberian weasel are also detected through metabarcoding analysis. This study is valuable that conducted in outdoor lotic system. The study suggests a new wildlife monitoring methodology integrating overlayed geographic data and environmental DNA.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.3
• /
• pp.47-62
• /
• 2022

The Ministry of Environment has been working to reduce the impact on biodiversity, ecosystems, and social costs caused by soil runoff from highland Agricultural fields by setting up non-point pollution source management districts. To reduce soil loss, runoff path reduction technology has been applied, but it has been less cost effective. In addition, non-point pollution sources cause environmental conflicts in downstream areas, and recently highland Agricultural fields are becoming vulnerable to climate change. The Ministry of Environment is promoting the optimal management plan in earnest to convert arable land into forests and grasslands, but since non-point pollution is not a simple environmental problem, it is necessary to approach it from the aspect of NbS(Nature-Based Solution). In this study, a scenario for applying the nature-based solution was established for three subwatersheds west of Haean-myeon, Yanggu-gun, Gangwon-do. The soil loss distribution was spatialized through GeoWEPP and the amount of soil loss was compared for the non-point pollution reduction effect of mixed forests and grasslands. When cultivated land with a slope of 20% or more and ginseng fields were restored to perennial grasslands and mixed forests, non-point pollution reduction effects of about 32% and 29.000 tons compared to the current land use were shown. Also, it was confirmed that mixed forest rather than perennial grassland is an effective nature-based solution to reduce non-point pollution.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.2
• /
• pp.77-90
• /
• 2024

PURPOSE. The study aims to investigate the influence of the ferrule effect and types of posts on the stress distribution in three morphological types of the maxillary central incisor. MATERIALS AND METHODS. Nine models were created for 3 maxillary central incisor morphology types: "Fat" type - crown 12.5 mm, root 13 mm, and buccolingual cervical diameter 7.5 mm, "Medium" type - crown 11 mm, root 14 mm, and buccolingual cervical diameter 6.5 mm, and "Slim" type - crown 9.5 mm, root 15 mm, and buccolingual cervical diameter 5.5 mm. Each model received an anatomical castable post-and-core or glass-fiber post with resin composite core and three ferrule heights (nonexistent, 1 mm, and 2 mm). Then, a load of 14 N was applied at the cingulum with a 45° slope to the long axis of the tooth. The Maximum Principal Stress and the Minimum Principal Stress were calculated in the root dentin, crown, and core. RESULTS. Higher tensile and compression stress values were observed in root dentin using the metallic post compared to the fiber post, being higher in the slim type maxillary central incisor than in the medium and fat types. Concerning the three anatomical types of maxillary central incisors, the slim type without ferrule height in mm presented the highest tensile stress in the dentin, for both types of metal and fiber posts. CONCLUSION. Post system and tooth morphology were able to modify the biomechanical response of restored endodontically-treated incisors, showing the importance of personalized dental treatment for each case.