• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.111-123
• /
• 2023

The slope of an open cut tunnel is located above the exit of the Leijia tunnel on the Changgan high-speed railway. During the excavation of the open cut tunnel foundation pit, the slope slipped twice, a large landslide of 92500 m³ formed. The landslide body and unstable slope body not only caused the foundation pit of the open cut tunnel to be buried and the anchor piles to be damaged but also directly threatened the operational safety of the later high-speed railway. Therefore, to study the stability change in the slope of the open cut tunnel under heavy rain and excavation conditions, a 3D numerical calculation model of the slope is carried out by Midas GTS software, the deformation mechanism is analyzed, anti-sliding measures are proposed, and the effectiveness of the anti-sliding measures is analyzed according to the field monitoring results. The results show that when rainfall occurs, rainwater collects in the open cut tunnel area, resulting in a transient saturation zone on the slope on the right side of the open cut tunnel, which reduces the shear strength of the slope soil; the excavation at the slope toe reduces the anti-sliding capacity of the slope toe. Under the combined action of excavation and rainfall, when the soil above the top of the anchor pile is excavated, two potential sliding surfaces are bounded by the top of the excavation area, and the shear outlet is located at the top of the anchor pile. After the excavation of the open cut tunnel, the potential sliding surface is mainly concentrated at the lower part of the downhill area, and the shear outlet moves down to the bottom of the open cut tunnel. Based on the deformation characteristics and the failure mechanism of the landslides, comprehensive control measures, including interim emergency mitigation measures and long-term mitigation measures, are proposed. The field monitoring results further verify the accuracy of the anti-sliding mechanism analysis and the effectiveness of anti-sliding measures.

• 제어로봇시스템학회논문지
• /
• 제10권6호
• /
• pp.545-550
• /
• 2004

Recent natural disasters like flooding and slope collapse have shown the need for natural risk management system, as they endanger directly public health and cause severe damages on the national economy. In order to improve the efficiency of risk management systems, this management system based on AANN(Auto-Associative Neural Network)is proposed in this paper. AANN can be effectively used for identification of abnormal data and data compression. The proposed AANN-based risk management system collects and stores measurement data from sensors and transmits them to remote server for web-monitoring. Generally, it is desirable to transmit the compressed data instead of raw data in normal state. However, if dangerous situation happens, rapid tramission of measurement data should be required. These requirements are easily satisfied by using AANN. In order to verify the feasibilities of the proposed system, The AANN-based risk management system is applied to slope collapse monitoring system.

• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.17-25
• /
• 2004

Hull girder stress monitoring system for container ship uses four long-base-strain-gages at mid-ship to monitor the resultant stresses and the applied moment components of horizontal, vertical and torsional moments. The bending moments are estimated by using the conventional strain-moment relations, however, the torsional moment related to the warping strain requires the assumption of the shape of torsional moments over the hull girder. Though this shape could be a sine function with an adequate period, it largely depends upon certain empirical formulas. This paper introduces additional four long-base-strain-gages at mid-ship to derive the longitudinal slope of the warping strain because this slope is directly related to the torsional moment by Bi-moment concept. An open-channel-type cantilever beam has been selected as a simplified model for container ship and the result has proved that the suggested concepts can estimate the torsional component accurately. Finally this method can become reliable technique to derive all external moments in hull girder stress monitoring system for container ships.

• 방재저널
• /
• 제14권5호
• /
• pp.158-159
• /
• 2012

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.724-731
• /
• 2006

The purpose of this study is to estimate a landslide using the SLOPILE program from the slope reinforced by slope stability systems such as soil nailing and pile. To do this, cutting slope located at Donghae-Highway in Kwangwon-Do was considered. The behavior of slope was monitored for a long term by using instrumentation according to the reinforcement stages. The sequence of reinforcement stages was followed as pile installation, boring, soil nailing installation, anchoring and embankment. The result from this case study shows that the safety factor of slope depends on the reinforcement stage more or less.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1211-1218
• /
• 2005

Temperature variation according to space and time on the inner parts of engineering constructions(e.g.: dam, slope) can be a basic information for diagnosing their safety problem. In general, as constructions become superannuated, structural deformation(e.g.: cracks, defects) could be occurred by various factors. Seepage or leakage of water through these cracks or defects in old dams will directly cause temperature anomaly. Groundwater level also can be easily observed by abrupt change of temperature on the level. This study shows that the position of seepage or leakage in dam body can be detected by multi-channel temperature monitoring using thermal line sensor. For this, diverse temperature monitoring experiments for a leakage physical model were performed in the laboratory. In field application of an old dam, temperature variations for water depth and for inner parts of boreholes located at downstream slope were measured. Temperature monitoring results for a long time at the bottom of downstream slope of the dam showed the possibility that temperature monitoring can provide the synthetic information about flowing path and quantity of seepage of leakage in dam body.

• 지질공학
• /
• 제22권2호
• /
• pp.157-171
• /
• 2012

노천광산에서 사면설계는 안정성과 경제성 측면에서 동시에 접근하여 결정해야 한다. 또한 일반 도로 사면과 달리 대부분 보강 없이 굴착해야 하기 때문에 사면경사가 가장 중요한 설계 변수이다. 본 연구에서는 인도네시아 Pasir 광산의 Roto South 채탄장에 대한 사면 변위계측, 계측자료의 해석 및 수치해석을 통해 사면의 거동을 감시하기 위한 계측 시스템을 제안하고자 한다. Pasir 광산의 경우 관리해야할 사면의 영역이 매우 광범위하고, 수치해석에 의한 예상 변위량은 최대 3,000 mm 정도로 나타났다. 현장에서 수행된 경사계에 의한 계측 및 GPS에 의한 변위 계측에 대한 검토와 자동화를 위한 SSR (slope stability radar system)의 적용에 대해 검토하였다.

• 한국환경복원기술학회지
• /
• 제9권1호
• /
• pp.112-120
• /
• 2006

It is possible to divide the historical changes of slope revegetation in Japan into five periods as follows; 1) The early period after creation(1927-1948), 2) The spreading period of modern revegetation work with manpower(1947-1958), 3) The spreading period of rapid revegetation technique using exotic grasses with machineries(1959-1985${\dots}$), 4) The spreading period of rapid reforestation technique by fast growing species mainly using leguminous shrub species(1986-1995${\dots}$), 5) The developing period of nature restoration technique using endemic arborous species(1996-). Recently main purpose of slope revegetation has been developing from the erosion protection to the nature restoration in the current of the 5th period. It is said that the role of the Japanese Society of Revegetation Technology(JSRT) is critical to the history of slope revegetation in Japan. 'The tentative guidelines of slope nature restoration' was announced by JSRT in 2004. In the guidelines, it was proposed that the planning techniques of using suitable seeds/plants based on the preservation level at the each construction sites. Moreover, the use of soil seed bank is the new and important study theme in the field of nature restoration. Consequently, at present the importance of advanced monitoring methods for vegetation maintenance and plant sociologic survey to evaluate the plant succession is increasing. Finally, some critical concepts are necessary to develop the field of restoration in Korea as follows; 1) monitoring of constructed sites, 2) ensuring of biodiversity, 3) recognition of slow revegetation and mosaic arrangement in revegetation, 4) reuse and recycle on the construction sites, and 5) promotion of specialist.

• 지질공학
• /
• 제17권2호
• /
• pp.253-261
• /
• 2007

집중강우에 의해 주로 발생되는 절토사면 붕괴는 인적, 물적 피해를 초래한다. 한국건설기술연구원은 예방 수단으로서 위험사면을 집중관리하고 있다. 지속적인 사면관리에도 불구하고 지구환경의 변화로 절토사면의 붕괴발생 빈도는 점차적으로 증가하고 있다. 이에 대책공법 적용이 어려운 절토사면에 대하여 상시계측시스템을 설치하고 있다. 상시계측시스템의 운용은 대인 대물 피해에 대한 조치로서 활용될 수 있으나, 강우시 절토사면의 붕괴 징후를 인지하더라도 관리자가 현장관리 작업을 수행함에 있어서 시공간적 제약으로 인한 한계가 있다. 낙석신호등은 상시계측시스템을 통하여 사면 위험 징후가 발견될 시, 도로이용자에게 낙석발생에 대한 위험을 주지시키고, 붕괴시 도로관리자의 현장 도착 전까지 자동적으로 또는 수동적으로 도로를 차단시킴으로서 사면붕괴에 의한 피해를 예방하는 관리시스템의 일종이다.

• 지질공학
• /
• 제23권3호
• /
• pp.283-292
• /
• 2013

석회암 사면에서 터널 출입구를 시공하기 위하여 진입로를 개설하던 중 사면붕괴가 발생되었다. 사면의 붕괴원인을 조사하기 위하여 현장조사, 실내시험 및 수치해석을 수행하였다. 수치해석결과에 따르면 터널 출입구 진입로 개설이전 사면안전율은 1.0이하이며, 진입로 개설이후 사면안전율은 더 저하되는 것으로 나타났다. 그리고 진입로 개설이후 전단변형률 및 소성영역은 사면상부에서 하부로 전이되므로 사면활동영역이 증가되어 사면안정성을 저하시키는 것으로 해석되었다. 터널 출입구 시공을 위해서는 해당사면에 대한 안정성을 확보하여야 하므로, 대상현장의 조건을 고려하여 록볼트, 록앵커 및 FRP 그라우팅을 사면에 보강하는 것으로 결정하였다. 적용된 사면보강공법의 효과를 확인하기 위하여 현장계측을 수행하였다. 현장계측결과 사면지반의 수평변위는 매우 미소하며, 대부분 발생된 이후 다시 회복되는 탄성거동을 보였다. 그리고 록볼트 및 앵커축력은 터널굴착작업 및 장마기간에 의한 영향보다는 사면굴착작업시 영향을 가장 크게 받으며, 터널굴착작업이후 수렴하는 경향을 보이므로 대상사면은 안정한 상태임을 확인할 수 있다.