• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.320-329
• /
• 2005

The use of diverse methods for the retaining system has been continuously increased in order to maintain the stability during excavation. However, ground anchor system occasionally may have the restriction in urban excavation sites nearby the existing structures because of space limitation. In this case, soil nailing system with relatively short length of nails could be efficiently useful as an alternative method. The general soil nailing support system, however, may result in excessive deformations particularly in excavating the zone of weak soils or nearby the existing structures. Therefore, applying the pretension force to the soil nails then could play important roles to reduce deformations mainly in an upper part of the nailed-soil excavation system as well as to improve the local slope stability. In this study, a newly modified soil nailing technology named as the PSN(Pretention Soil Nailing) is developed to reduce both facing displacements and ground surface settlements during top-down excavation process as well as to increase the global slope stability. Up to now, the PSN system has been investigated mainly focusing on an establishment of the design procedure. In the present study, the field tests including pull-out tests were fulfilled to investigate the behavior of characteristics for PSN system. All results of tests were also analyzed to provide a fundamental and efficient design.

• Atmosphere
• /
• v.27 no.4
• /
• pp.483-498
• /
• 2017

Sky view factor can quantify the influence of complex obstructions. This study aims to evaluate the best available SVF method that represents an urban thermal condition with land cover in complex city of Korea and also to quantify a correlation between SVF and mean air temperature; the results are as follows. First, three SVF methods comparison result shows that urban thermal study should consider forest canopy induced effects because the forest canopy test (on/off) on SVF reveals significant difference range (0.8, between maximum value and minimum value) in comparison with the range (0.1~0.3) of SVFs (Fisheye, SOLWEIG and 3DPC) difference. The significance is bigger as a forest cover proportion become larger. Second, R-square between SVF methods and urban local mean air temperature seems more reliable at night than a day. And as the value of SVF increased, it showed a positive slope in summer day and a negative slope in winter night. In the SVF calculation method, Fisheye SVF, which is the observed value, is close to the 3DPC SVF, but the grid-based SWG SVF is higher in correlation with the temperature. However, both urban climate monitoring and model/analysis study need more development because of the different between SVF and mean air temperature correlation results in the summer night period, which imply other major factors such as cooling air by the forest canopy, warming air by anthropogenic heat emitted from fuel oil combustion and so forth.

• Journal of Welding and Joining
• /
• v.11 no.2
• /
• pp.27-41
• /
• 1993

The estimation of nugget sizes was attempted by utilizing the artificial neural networks method. Artificial neural networks is a highly simplified model of the biological nervous system. Artificial neural networks is composed of a large number of elemental processors connected like biological neurons. Although the elemental processors have only simple computation functions, because they are connected massively, they can describe any complex functional relationship between an input-output pair in an autonomous manner. The electrode head movement signal, which is a good indicator of corresponding nugget size was determined by measuring the each test specimen. The sampled electrode movement data and the corresponding nugget sizes were fed into the artificial neural networks as input-output pairs to train the networks. In the training phase for the networks, the artificial neural networks constructs a fuctional relationship between the input-output pairs autonomusly by adjusting the set of weights. In the production(estimation) phase when new inputs are sampled and presented, the artificial neural networks produces appropriate outputs(the estimates of the nugget size) based upon the transfer characteristics learned during the training mode. Experimental verification of the proposed estimation method using artificial neural networks was done by actual destructive testing of welds. The predicted result by the artifficial neural networks were found to be in a good agreement with the actual nugget size. The results are quite promising in that the real-time estimation of the invisible nugget size can be achieved by analyzing the process variable without any conventional destructive testing of welds.

• Journal of Environmental Science International
• /
• v.18 no.1
• /
• pp.99-111
• /
• 2009

In this study vegetation structure was monitored focusing on slanting surface of stream for the purpose of developing a management plan and ecological restoration of small stream in Paju. The study was conducted by types of geographical structure, yearly flora, naturalization rate changes, actual vegetation changes, plant community changes. Slope area of small stream in Paju was varied in the slope range of $10{\sim}35^{\circ}$. The survey results of yearly flora showed that 37 species appeared in 2000, 55 species in 2001, 95 species in 2002, and 125 species in 2003. Therefore, the trend of continuous increase of flora each year was observed. In the case of yearly changes of actual vegetation, indigenous wetland herb community including Phragmites communis$(19.99%{\rightarrow}18.42%{\rightarrow}19.60%)$ did not show substantial changes in the area, while the influence of controlled flora such as Humulus scandens$(8.86%{\rightarrow}5.26%{\rightarrow}9.73%)$, and Ambrosia artemisiifolia$(1.06%{\rightarrow}1.43%{\rightarrow}6.93%)$ were increased. The vegetation structure investigated by 18 preset belt-transects also indicated that Phragmites communis and Miscanthus sacchariflorus were maintaining the status or decreasing the population, while the population of Humulus scandens, Ambrosia artemisiifolia, Setaria viridis, and Erigeron canadensis were greatly increased. Our proposal management to restore ecology is as follows: first, preservation and restoration of Phragmites communis landscape; second, restoration of potential stream vegetation community; third, selection and removal of controlled plants.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.395-402
• /
• 1997

We have obtained the optimum thickness of anti-reflection(AR) coating on one of facets of a $\1.55mu\textrm{m}$ InGaAsP MQW FP semiconductor laser by in-site monitoring of the light emitted from the rear facet during the film deposition on the fore facet. The optimum thickness of $SiO_x$ thin film whose refractive index is 1.85 was found to be 188 nm. The reflectivity of the coated facet was calculated by the threshold current ratio of before and after AR coating, which was obtained from exprimental data, and it was about 2$\times$ $10^{-4}$. The results show that the output power is increased by 87% at bias current 60 mA, the slope efficiency is increased by 3.4 times, and the threshold current is increased by 2.64 times. By in-situ depositing of the $Si/SiO_2$ thin film HR coating on the rear facet, the output power was increased by 160% than before the AR and HR coatings, the slope efficiency was increased by 3.8 times, the threshold current was increased by 1.07 times, which is similar to the value of before AR coating. Due to the AR and HR coatings the output light power characteristics were enhanced.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.4
• /
• pp.75-86
• /
• 2018

This research was thereby made to study and analysis ecological, landscape, and stability qualities of roadside cut Slopes in expressways and national highways that went through revegetation works. Also, evaluation items and framework for integrated assessment of plant structure and restored state for the maintenance were suggested. Following is the summary of the result. firstly, for stabilization of introduced native plant species on roadside cut slops, assessment on the post-project environmental management through long-term monitoring and maintenance works must be made. It signifies a form of authentic recovery and restoration by the native plants. second, current evaluation framework on the test beds is well managed with clear evaluation standards and table while its method of assessing the post management with only test bed results lacks conformity with this study site. Newly developed evaluation framework on the post construction sites is estimated to be used as assessment standards on any roadside construction sites. Third, after site investigation distinction was observed among different revegetating construction types in the long-term perspective. Due to the different duration time of vegetation state between seed-spray measures(degraded in time) and layer-spray measure(maintained), the use of coarse straw-mat mulching work or Coir net was suggested in long term maintenance of cut slopes. forth, segmentation of post environmental assessment is organized into three large categories of "ecological", "stabile", and "landscape" qualities regarding post restoration quality and stability of slope through native plants with which categories marks 50, 30, 20 points of rates. fifth, components of the post environmental assessment were segmented in twelve categories driving results from former experimental construction and newly focused items on site. In the future, it is possible to propose a customized assessment method considering the location and location of construction work if the research on the application of post-environment assessment methods for road construction surface recording is conducted systematically.

• Journal of Wetlands Research
• /
• v.20 no.3
• /
• pp.201-209
• /
• 2018

In this study, the water quality index was calculated using the water quality monitoring data of the major tributaries of the Nakdong River and long-term trend analysis was performed to identify the tributaries requiring priority management. We used a Real-Time Water Quality Index method implemented by the Ministry of Environment. Linear regression as a parametric method and Mann-Kendall Test and Sen Slope Test as a nonparametric method were applied for the trend analysis. The water quality index of major tributaries except for Migeon2 and Seokyo2 was in the range below Fair grade and there were no significant trends for the rest of the sites except Bukan, Chennae, Hogye, Yongdeok. Therefore, in order to improve the water quality of the main stream, management of the tributaries should be preceded.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.233-240
• /
• 2019

The aim of this study was to provide basic data that could identify and help prevent a slow-moving landslide using an analysis of the relationship between below-ground characteristics and water from three slow-moving landslide areas in Pohang, Gyeongsangbuk-do, South Korea. Surface surveys, resistivity, seismic exploration, well logging, and boring surveys were conducted in the three areas. The main direction of discontinuous surface was matched with the slope direction of the three landslides. The results indicatedthat slow-moving landslides might occur in the direction of the slope. Underground water was distributed within the crush zones within the three landslide areas and flowed along the tensile cracks. There was a significant difference (p<0.01) between the mean angle of the tensile cracks and that of the underground waterflow (p=0.8019). These results indicated that the progress of a slow-moving landslide can be forecast by monitoring the location and flow of underground water within a known slow-moving landslide area.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.36-42
• /
• 2021

This study was conducted to analyze the effect of the gear specification and gear quality corresponding to the macro geometry on the gear transmission error. The two pairs of gears with large and small transmission errors were selected for calculation, and two pairs of gears were manufactured with different gear quality. The test gears were manufactured by two different gear specifications with ISO 5 and 8 gear quality, respectively. The transmission error measurement system consists of an input motor, reducer, encoders, gearbox, torque meter, and powder brake. To confirm the repeatability of the test results, repeatability was confirmed by performing three repetitions under all conditions, and the average value was used to compare the transmission error results. The transmission errors of the gears were analyzed and compared with the test results. When the gear quality was high, the transmission error was generally low depending on the load, and the load at which the decreasing transmission error phenomenon was completed was also lower. Even when the design transmission error according to the gear specification was different, the difference of the minimum transmission error was not large. The transmission error at the load larger than the minimum transmission error load increased to a slope similar to the slope of the analysis result.

• Journal of Forest and Environmental Science
• /
• v.26 no.3
• /
• pp.149-159
• /
• 2010

This paper analyzes data on the composition, status, diversity, and distribution pattern of invasive forest undergrowth in a protected area (Khadimnagar National Park) of Northeastern Bangladesh. Assessment was done by means of stratified random sampling to diversify the invasive forest undergrowth species. For vegetation survey, 45 plots were taken randomly in ($2m{\times}2m$) circular plot from three topographical regions namely top of the hill, middle slope and plain land (15 plots from each region) and a total of 715 individuals, 22 invasive species belonging to 17 families were recorded from the study site. Among invasive species, shrubs constitute 10 species, herbs 9 species, and vines 3 species respectively. Mass number of invasive undergrowth species was grows in plain land (45.45%) followed by middle slope (31.82%). Based on the survey, invasive undergrowth plants of study areas were also categorized into three degrees of invasiveness e.g., highly invasive, moderately invasive and potentially invasive. Herbs, shrubs, and vines constitute the highest density at Chromolaema odorata (Linn.) King. (1.09), relative density at Chromolaema odorata (Linn.) King. 6.85%; highest and lowest frequency was calculated at Cassia alata L. (64.44%) and Diplazium esculentum (24.44%); for relative frequency the highest was Cassia alata L., which occupies 6.64%. Determination of the abundance of the different species revealed that Cassia alata L., constitutes (3.36) followed by Pteris cretica Wilsonii (3.14) of the area. The presence of invasive undergrowth species always reduced the number of associated species. Therefore, an extensive in-depth long-term investigation, proper policy formulation and management interventions and further study and continuous monitoring on their impacts need to be triggered targeting the control of the invasive undergrowth species of this protected area. In this aspect, national and international organization could help to conserve its biodiversity.