• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.257-267
• /
• 2016

Charts are used extensively in slope practical application to meet the need of quick assessment of rock slope design. However, Charts for estimating the shear strength of the rock mass of a slope are considerably limited. In this paper, based on the Hoek-Brown (HB) criterion which is widely used in rock slope engineering, we present charts which can be used to estimate the Mohr-Coulomb (MC) parameters angle of friction ${\phi}$ and cohesion c for given slopes. In order to present the proposed charts, we firstly present the derivation of the theoretical relationships between the MC parameters and ${\sigma}_{ci}/({\gamma}H)$ which is termed the strength ratio (SR). It is found that the values of $c/{\sigma}_{ci}$ and ${\phi}$ of a slope depend only on the magnitude of SR, regardless of the magnitude of the individual parameters ${\sigma}_{ci}$(uniaxial compressive strength), ${\gamma}$(unit weight) and H (slope height). Based on the relationships between the MC parameters and SR, charts are plotted to show the relations between the MC parameters and HB parameters. Using the proposed charts can make a rapid estimation of shear strength of rock masses directly from the HB parameters, slope geometry and rock mass properties for a given slope.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.767-768
• /
• 2005

• 지질공학
• /
• 제11권2호
• /
• pp.153-161
• /
• 2001

암반사면의 안정성 평가에 있어서 경험적 평가에 중점을 둔 RMR분류법과 여러 가지 변수들을 이용한 평가방법인 평사투영·한계평형·유한차분·개별요소해석을 실시하였다. 그리고 여러 가지 암반사면의 안정성에 영향을 미치는 변수들의 불확실성을 고려할 수 있는 점추정법에 의한 신뢰성해석과 더불어 퍼지언어를 이용한 퍼지근사추론법의 구조화에 따른 평가방법을 비교·분석 하였다. 그 결과 점추정법의 신뢰성해석을 전 구간의 안정성을 평가 할 수 있으며 퍼지근사추론법에 의한 안정성평가는 다른 기존의 안정성해석 결과와 전반적으로 일치함을 알 수 있다. 이와 같이 RMR분류·평사투영·한계평형·유한차분·개별요소해석과 점추정법의 신뢰성해석, 퍼지근사추론법을 병행하면 암반사면의 특수성을 체계적이고 종합적으로 평가할 수 있다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권7호
• /
• pp.344-351
• /
• 2006

The fatigue of back muscle in the repetitive lifting motion was studied using multiple parameters(FFT_MDF, RMS, 2C, NT) in this study. Recent developments in the time-frequency analysis procedures to compute the IMDF(instantaneous median frequency) were utilized to overcome the nonstationarity of EMG signal using Cohen-Posch distribution. But the above method has a lot of computation time because of its complexity. So, in this study, FFT_MDF(median frequency estimation based on FFT) algorithm was used for median frequency estimation of back muscle EMG signal during muscle work in uniform velocity portion of lumbar movement. The analysis period of EMG signal was determined by using the run test and lumbar movement angle in dynamic task, such as lifting. Results showed that FFT_MDF algorithm is well suited for the estimation of back muscle fatigue from the view point of computation time. The negative slope of a regression line fitted to the median frequency values of back muscle EMG signal was taken as an indication of muscle fatigue. The slope of muscle fatigueness with FFT_MDF method shows the similarity of 77.8% comparing with CP_MDF(median frequency estimation based on Cohen Posch distribution) method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.620-625
• /
• 2009

The seismic slope stability is most often evaluated by the pseudo-static limit analysis, in which the earthquake loading is simplified as static inertial loads acting in horizontal and/or vertical directions. The transient loading is represented by constant acceleration via the pseudostatic coefficients. The result of a pseudostatic analysis is governed by the selection of the value of the pseudostatic coefficient. However, selection of the value is very difficult and often done in an ad hoc manner without a sound physical reasoning. In addition, the maximum acceleration is commonly estimated from the design guideline, which cannot accurately estimate the dynamic response of a slope. There is a need to perform a 2D dynamic analysis to properly define the dynamic response characteristics. This paper develops the modified one-dimensional seismic site response analysis. The modified site response analysis adjusts the density of the layers to simulate the change in mass and weight of the layers of the slope with depth. Multiple analyses are performed at various locations within the slope to estimate the change in seismic response of the slope. The calculated peak acceleration profiles with depth from the developed procedure are compared to those by the two-dimensional analyses. Comparisons show that the two methods result in remarkable match.

• 자원환경지질
• /
• 제22권1호
• /
• pp.81-87
• /
• 1989

자력탐사 해석에 있어서 Slope, graphical, spectral 및 Fourier 해석 등을 포함한 많은 심도계산 방법들이 연구 발표되었다. 그러나 Peters의 half-slope 및 Vacquier 둥의 maximum-slope 방법들이 석유 탐사에 종사하는 지구물리학자들 간에 인기가 있고 널리 사용되고 있다. Slope 방법은 그 적용이 간단하고 쉬울 뿐만 아니라 대체적으로 신뢰성 있는 결과를 준다. Spectral 방법은 평균 깊이의 추정에는 빠르고 효과적이기는 하지만 고립된 개개 자력이상에 적용될 때 믿을 수 없는 결과가 나온다. Spectral 방법의 문제점을 줄이고 결과의 정확도를 높이기 위해서 이 방법의 신뢰도와 적용한계점에 대한 논의를 제시한다.

• 한국수자원학회논문집
• /
• 제51권8호
• /
• pp.687-701
• /
• 2018

수자원의 추가 확보와 홍수에 대한 선제적 대응을 목적으로 국내 4대강 주요 지점에 다기능보(multi-function weir)를 설치하였다. 다기능보는 흐름 통제 단면으로서 정밀한 유량 산정이 가능한 수리구조물로 하천의 일반적인 수위-유량 관계식보다 정밀하게 산정할 수 있으며, 향후 각 유역의 국가 표준 유량 기준점으로 활용할 수 있는 방안을 강구하는 것이 바람직하다. 이에 본 연구에서는 영산강의 승촌보를 대상으로 현재 취득되는 운영 자료를 분석하여 개선사항을 제시하고, 이를 보완하기 위하여 간접유량추정 방법인 경사-면적법(slope-area method)을 응용하여 정밀한 유량 산정이 가능할 수 있는 방법을 제안하고자 한다. 분석 결과, 현재 상태는 이론적인 유량계수 범위 초과와 급격한 변동, 상 하류부의 수위차를 연동하지 못하는 등 이에 대한 보완이 필요하였다. 응용한 경사-면적법은 앞서 제시한 한계점을 보완하고, 자연 하도의 검증된 수리학적 이론에 의해 수면경사와 마찰손실을 반복 계산을 통해 오차를 줄여나가는 상호 보완적인 방법으로 물리적으로 타당하여 적용가능성을 확인하였다. 향후, 다기능보의 최적 운영을 위하여 이를 적용한다면, 실제 운영에 도움이 될 것으로 기대된다.

• Advances in Computational Design
• /
• 제3권3호
• /
• pp.269-288
• /
• 2018

180 different 2D numerical analyses have been carried out to estimate the factor of safety (FOS) for rooted slopes. Four different types of vegetated coverage and a variety of slope geometry considering three types of soil have been evaluated in this study. The highly influenced parameters on the slope's FOS are determined. They have been chosen as the input parameters for developing a new practical relationship to estimate the FOS with an emphasis on the roots effects. The dependency of sliding mode and shape considering the soil and roots-type has been evaluated by using the numerical finite element model. It is observed that the inclination and height of the slope and the coverage type are the most important effective factors in FOS. While the soil strength parameters and its physical properties would be considered as the second major group that affects the FOS. Achieved results from the developed relationship have shown the acceptable estimation for the roots slope. The extracted R square from the proposed relationship considering nonlinear estimation has been achieved up to 0.85. As a further cross check, the achieved R square from a multi-layer neural network has also been observed to be around 0.92. The numerical verification considering different scenarios has been done in the current evaluation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.123-130
• /
• 2003

The estimation of key soil properties and subsequent quantitative assessment of the associated uncertainties has always been an important issue in geotechnical engineering. It is well recognized that soil properties vary spatially as a result of depositional and post-depositional processes. The stochastic nature of spatially varying soil properties can be treated as a random field. A practical statistical approach that can be used to systematically model various sources of uncertainty is presented in the context of reliability analysis of slope stability Newly developed expressions for probabilistic characterization of soil properties incorporate sampling and measurement errors, as well as spatial variability and its reduced variance due to spatial averaging. Reliability analyses of the probability of slope failure using the different statistical representations of soil properties show that the incorporation of spatial correlation and conditional simulation leads to significantly lower probability of failure than obtained using simple random variable approach.

• 한국해안해양공학회지
• /
• 제16권2호
• /
• pp.103-107
• /
• 2004

파활동경사라는 새로운 무차원 수를 도입하여 소파제의 중량 산정식을 개발하였다. van der Meer(1987)는 Iribarren 수를 도입하여 중량 산정식을 개발하였는데 조건에 따라 전혀 다른 분포경향을 보였다. 반면에 파활동경사를 도입한 산정식은 조건에 관계없이 동일한 분포경향을 보였으며, 비례상수를 Iribarren 수의 함수로 취하였을 때 매우 높은 정밀도를 갖는 경험식을 도출하였다.