• Title/Summary/Keyword: Slope Difference

Search Result 739, Processing Time 0.02 seconds

Fish fauna and characteristics of Carassius auratus population in the Boryeong Reservoir (보령호의 어류상 및 붕어 개체군 특성)

  • Choi, Won Sub;Han, Jung Soo;Choi, Jun Kil;Lee, Hwang Goo
    • Korean Journal of Environmental Biology
    • /
    • v.38 no.4
    • /
    • pp.667-677
    • /
    • 2020
  • This study was conducted to investigate the fish fauna and characteristics of the Carassius auratus population in the Boryeong Reservoir in Chungcheongnam-do from October 2017 to June 2018. The collected fish were identified as 3,506 individuals of 15 species from a total of nine families. The dominant and subdominant species were H. nipponensis with 1,706 (48.6%) individuals and C. auratus with 1,021 (29.1%) individuals, respectively. The biomass of C. auratus (246,130g), P. fulvidraco(50,610g), C. cuvieri (14,730 g), S. asotus (11,560 g), and C. carpio (10,930 g) was analyzed. The results of the community analysis showed a dominant index value of 0.87 (±0.2), a diversity index value of 0.78 (±0.5), an evenness index value of 0.47 (±0.2), and a richness index value of 0.99 (±0.5). The length-weight analysis of C. auratus showed a regression coefficient b of 3.06, and a condition factor (K) of 0.0004 with a positive slope. The frequency distribution of the total length analysis of the C. auratus population inhabiting the Boryeong Reservoir showed a high distribution of lengths between 140-160 mm and a low distribution between 230-280 mm. The normalized difference water index (NDWI) was analyzed over the Boryeong Reservoir water surface from 2013 to 2014 using Landsat 8 channel data. The areas where the NDWI was decreased were located at the inflow site of Ungcheon Stream.

Roughness Analysis of Paved Road using Drone LiDAR and Images (드론 라이다와 영상에 의한 포장 노면의 평탄성 분석)

  • Jung, Kap Yong;Park, Joon Kyu
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.39 no.1
    • /
    • pp.55-63
    • /
    • 2021
  • The roughness of the road is an important factor directly connected to the ride comfort, and is an evaluation item for functional evaluation and pavement quality management of the road. In this study, data on the road surface were acquired using the latest 3D geospatial information construction technology of ground LiDAR, drone photogrammetry, and drone LiDAR, and the accuracy and roughness of each method were analyzed. As a result of the accuracy evaluation, the average accuracy of terrestrial LiDAR were 0.039m, 0.042m, 0.039m RMSE in X, Y, Z direction, and drone photogrammetry and drone LiDAR represent 0.072~0.076m, 0.060~0.068m RMSE, respectively. In addition, for the roughness analysis, the longitudinal and lateral slopes of the target section were extracted from the 3D geospatial information constructed by each method, and the design values were compared. As a result of roughness analysis, the ground LiDAR showed the same slope as the design value, and the drone photogrammetry and drone LiDAR showed a slight difference from the design value. Research is needed to improve the accuracy of drone photogrammetry and drone LiDAR in measurement fields such as road roughness analysis. If the usability through improved accuracy can be presented in the future, the time required for acquisition can be greatly reduced by utilizing drone photogrammetry and drone LiDAR, so it will be possible to improve related work efficiency.

Availability of Land Surface Temperature Using Landsat 8 OLI/TIRS Science Products (Landsat 8 OLI/TIRS Science Product를 활용한 지표면 온도 유용성 평가)

  • Park, SeongWook;Kim, MinSik
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.3
    • /
    • pp.463-473
    • /
    • 2021
  • Recently, United States Geological Survey (USGS) distributed Landsat 8 Collection 2 Level 2 Science Product (L2SP). This paper aims to derive land surface temperature from L2SP and to validate it. Validation is made by comparing the land surface temperature with the one calculated from Landsat 8 Collection 1 Level 1 Terrain Precision (L1TP) and the one from Automated Synoptic Observing System (ASOS). L2SP is calculated from Landsat 8 Collection 2 Level 1 data and it provides land surface temperature to users without processing surface reflectance data. Landsat 8 data from 2018 to 2020 is collected and ground sensor data from eight sites of ASOS are used to evaluate L2SP land surface temperature data. To compare ground sensor data with remotely sensed data, 3×3 grid area data near ASOS station is used. As a result of analysis with ASOS data, L2SP and L1TP land surface temperature shows Pearson correlation coefficient of 0.971 and 0.964, respectively. RMSE (Root Mean Square Error) of two results with ASOS data is 4.029℃, 5.247℃ respectively. This result suggests that L2SP data is more adequate to acquire land surface temperature than L1TP. If seasonal difference and geometric features such as slope are considered, the result would improve.

Evaluation of Retrieval Accuracy of NO2 Column Density from Pandora Raw Data According to Wavelength Range and Absorption Cross-section Using DOAS Method (Pandora 원시자료로부터 차등흡수분광법을 이용하여 이산화질소 칼럼 농도 산출 시 파장 구간 및 흡수단면적에 따른 산출 정확도 평가)

  • Kim, Serin;Kim, Daewon;Lee, Hanlim
    • Korean Journal of Remote Sensing
    • /
    • v.38 no.2
    • /
    • pp.215-222
    • /
    • 2022
  • In this study, the effect of wavelength range and absorption cross-section used to retrieve nitrogen dioxide (NO2) vertical column density (VCD) from Pandora was analyzed using Differential Optical Absorption Spectroscopy (DOAS). During the GEMS Map of the Air Pollution (GMAP) 2020 campaign, data from direct sunlight observation with Pandora instrument in Seosan was used, and NO2 VCD was retrieved under four conditions. The average NO2 VCD under the four conditions ranged from 1.22×1016~1.38×1016 molec. cm-2, with a maximum difference of 0.16×1016 molec. cm-2 between each condition. The fitting error averaged 3.19~9.59%, showing an error within 10% in all cases, and the RMS was 5.11×10-3~7.16×10-3 molec. cm-2. The retrieved NO2 VCD using 4 conditions shows a slope in the range of 0.98 to 1.09 and correlation of 0.96 to 0.98 in comparison with Pandonia Global Network (PGN).

Changes in the Chlorophyll of Garlic Chives (Allium tuberosum) Resulting fromFertilizer and Drought Stress (비료와 가뭄 스트레스에 의한 부추의 엽록소 변화)

  • Huh, Man Kyu;Lee, Byeongryong
    • Journal of Life Science
    • /
    • v.32 no.10
    • /
    • pp.743-748
    • /
    • 2022
  • The garlic chive (Allium tuberosum Rotter) is a prominent herb species in Asia and other nations of the world. Garlic chives is a favorite vegetable and used to garnish noodles in Korea. The effects of various doses of N, P, and K fertilizers and drought stress on the chlorophyll content in the leaves of garlic chives were investigated. The evaluations showed that chlorophyll a content was 0.386 at 10 mg/l N fertilizer and 0.584 at 50 mg/l N fertilizer. The treatment group showed a significant difference with regard to the contents of chlorophylls a and b and total chlorophyll at the 5% level (p<0.05). Pearson's correlation coefficient (Pearson's r) for chlorophylls a and b and total chlorophyll were 0.940, 0.966, and 0.971, respectively. The highest content of chlorophylls a and b and total chlorophyll in the leaves was recorded at 40 mg/l P fertilizer, while the values corresponding to 50 mg/l P fertilizer were lower than those for 40 mg/l P fertilizer. The content of total chlorophyll evaluated at 10 mg/l K fertilizer was 0.312 and that at 50 mg/l was 0.589. The simple linear regression showed the relationship between chlorophyll efficiency aand moisture. The slope factors of the dark-level fluorescence yield (Fo), the maximum fluorescence yield (Fm), the quenched state (Fv), and the maximal PSII quantum yield (Fv/Fm) for chlorophyll-efficient indicators were -0.931, 0.972, 972, and 0.950, respectively. NPK fertilizers and drought stress affected the chlorophyll content and efficiency of A. tuberosum.

Dynamic of heat production partitioning in rooster by indirect calorimetry

  • Rony Lizana, Riveros;Rosiane, de Sousa Camargos;Marcos, Macari;Matheus, de Paula Reis;Bruno Balbino, Leme;Nilva Kazue, Sakomura
    • Animal Bioscience
    • /
    • v.36 no.1
    • /
    • pp.75-83
    • /
    • 2023
  • Objective: The objective of this study was to describe a methodological procedure to quantify the heat production (HP) partitioning in basal metabolism or fasting heat production (FHP), heat production due to physical activity (HPA), and the thermic effect of feeding (TEF) in roosters. Methods: Eighteen 54-wk-old Hy Line Brown roosters (2.916±0.15 kg) were allocated in an open-circuit chamber of respirometry for O2 consumption (VO2), CO2 production (VCO2), and physical activity (PA) measurements, under environmental comfort conditions, following the protocol: adaptation (3 d), ad libitum feeding (1 d), and fasting conditions (1 d). The Brouwer equation was used to calculate the HP from VO2 and VCO2. The plateau-FHP (parameter L) was estimated through the broken line model: HP = U×(R-t)×I+L; I = 1 if t<R or I = 0 if t>R; Where the broken-point (R) was assigned as the time (t) that defined the difference between a short and long fasting period, I is conditional, and U is the decreasing rate after the feed was withdrawn. The HP components description was characterized by three events: ad libitum feeding and short and long fasting periods. Linear regression was adjusted between physical activity (PA) and HP to determine the HPA and to estimate the standardized FHP (st-FHP) as the intercept of PA = 0. Results: The time when plateau-FHP was reached at 11.7 h after withdrawal feed, with a mean value of 386 kJ/kg0.75/d, differing in 32 kJ from st-FHP (354 kJ/kg0.75/d). The slope of HP per unit of PA was 4.52 kJ/mV. The total HP in roosters partitioned into the st-FHP, termal effect of feeding (TEF), and HPA was 56.6%, 25.7%, and 17.7%, respectively. Conclusion: The FHP represents the largest fraction of energy expenditure in roosters, followed by the TEF. Furthermore, the PA increased the variation of HP measurements.

Analysis of soil coarse pore fraction by major factors for evaluation of water conservation function potential in forest soil (산림토양의 수원함양기능 잠재력 평가를 위한 주요 인자별 토양 조공극률 분석)

  • Li, Qiwen;Lim, Hong-Geun;Moon, Hae-Won;Nam, Soo-Youn;Kim, Jae-Hoon;Choi, Hyung-Tae
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.25 no.6
    • /
    • pp.35-50
    • /
    • 2022
  • As the water shortage has become a noticeable issue due to climate change, forests play an importance role as the provider of water supply service. There is, however, little information about the relationships between the factors used in the estimation of water supply service and coarse pore fraction of forest soil which determines the potential of water supply. To find out whether there would be an amelioration in the scoring system of water supply service estimation, we examined all factors except meteorological one and additionally, analyzed 4 extra factors that might be related with coarse pore fraction of soil. A total of 2,214 soil samples were collected throughout South Korea to measure coarse pore fractions from 2015 to 2020. First, the result of average coarse pore fraction of all samples showed 32.98±6.59% which was consistent with previous studies. And the results of non-parametric analysis of variance indicated that only two of eleven factors that was used in the scoring system matched the results of coarse pore fraction of forest soils. Tree canopy coverage showed no difference among categories, and slope also showed no significance at level of 0.05 in the linear regression analysis. Additionally, the applicability of 4 extra factors were confirmed, as the result of coarse pore fractions of soil samples were different for various categories of each factor. Therefore, the scoring system of water supply service of forest should be revised to improve accuracy.

Electrochemical Characteristics of Electrode by Various Preparation Methods for Alkaline Membrane Fuel Cell (알칼리막 연료전지용 전극의 제조방법에 따른 전기화학적 특성 분석)

  • Yuk, Eunsung;Lee, Hyejin;Jung, Namgee;Shin, Dongwon;Bae, Byungchan
    • Journal of the Korean Electrochemical Society
    • /
    • v.24 no.4
    • /
    • pp.106-112
    • /
    • 2021
  • Catalyst poisoning by ionomers in membrane electrode assemblies of alkaline membrane fuel cells has been reported recently. We tried to improve the membrane electrode assembly's performance by controlling the solvent's ratio during electrode manufacturing. 4 Different mixing ratios of N-Methyl-2-pyrrolidone (NMP) and ethylene glycol (EG) gave four different cathode electrodes with platinum and Fuma-Tech ionomers. The electrode with higher EG improved polarization performance by about 36% compared to the NMP-based commercial ionomer. The dependence of the ionomer's dispersibility on the solvent seems responsible for the difference, which means that the non-uniform distribution of ionomers improves the performance of the electrode. High-frequency resistance, internal resistance corrected polarization curve, Tafel slope, mass activity, and impedance spectroscopy characterized the electrode. We can find that the existence of poor solvent improves cathode electrode performance. It seems to be the result of reduced poisoning of the catalyst according to the particle size distribution of the ionomer.

Biomechanical Analysis of Elderly Fall Related Risk Factors using Downhill Walking on Treadmill (트레드밀 내리막 보행을 이용한 노인 낙상관련 위험요인의 운동역학적 분석)

  • Woo, Jeong-Hyun;Park, Sang-Kyoon
    • 한국체육학회지인문사회과학편
    • /
    • v.55 no.2
    • /
    • pp.643-655
    • /
    • 2016
  • The purpose of this study was to investigate biomechanical differences between young and old adults during downhill walking on a treadmill in order to understand the mechanisms of elderly falls. Eighteen healthy young females(YG: yrs: 21.17±1.5) and eighteen healthy old females(OG: yrs: 66.67±1.33) participated in this study. They were asked to walk at their preferred speed on a treadmill at level, 7.5° and 15° decline. OG walked more wobbly in the medial and lateral directions than YG(p<.05). As slope got steeper, OG had smaller ROM(range of motion) of ankle and knee joints compared with YG. However, there was no difference in ROM of the hip between OG and YG, but maximum extension angle of OG was smaller compared with YG(p<.05). Smaller extensor moment was generated on OG during downhill walking(p<.05). It was hypothesized that more risk factors would be found on older people compared to young people during downhill. However, older people actually walks with a safer strategy compared to young people during downhill. Finally, current findings about biomechanical characteristics of elderly walking would provide useful fundamental information for a follow-up study regarding the prevention of elderly fall during their daily life.

Method for Increasing Stability by Reducing the Motion of a Lightweight Floating Body (경량 부유체의 운동 저감으로 안정성 증가방법에 관한 연구)

  • Seon-Tae Kim;Jea-Yong Ko;Yu-mi Han
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.29 no.4
    • /
    • pp.407-416
    • /
    • 2023
  • Demand for leisure facilities such as mooring facilities for berthing leisure vessels and floating pensions based on floating bodies is increasing owing to the rapid growth of the population and related industries for marine leisure activities. Owing to its relatively light weight as a fluid, inclination is easily generated by waves and surcharges flowing to the coast, resulting in frequent safety accidents because of the low stability. As a solution to this problem, a motion reduction device for floating bodies is proposed in this study. The device (motion reduction device based on the air pressure dif erence) was attached to a floating body and the effect was analyzed by comparing the results with those of a floating body without motion reduction. The effect analysis was further analyzed using a computer analysis test, and the method for increasing the stability of the floating body was studied, and its the effect was verified. Based on the analysis of the test results, the stability of the floating body increased with a motion damping device is higher than that of the floating body without a motion reducing device as the wave momentum reduces, owing to the air pressure difference. Therefore it was concluded that the use of such a device for reducing motion a floating body is useful not only for non-powered ships but also for powered and semi-submersible ships, and further research should be conducted by applying it to various fields.