• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.124-131
• /
• 2000

Numerical analysis of slop stability is carried out using seismic intensity, modified seismic intensity, and response seismic coefficient methods. It is found by comparing each of method that minimum safety factor precedes the required safety factor. It is also proved during analysis that most conservative method is the earthquake response analysis method, next is the response seismic coefficient method, and last one is the seismic intensity method. Usually, seismic intensity method is applied in analysis of slop stability. However, in view of safety factor, modified seismic intensity method is more conservative than seismic intensity method. Also modified seismic intensity method is appropriate when height of structure analyzed is high enough.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.108-115
• /
• 2000

Numerical analysis of slop stability is presented using seismic displacement, response seismic coefficient, and earthquake response analysis methods. In seismic displacement and response seismic coefficient methods, horizontal static seismic force is considered as 0.2g while vertical static seismic force is not considered in analysis. For earthquake response analysis Hahinoha-wave is applied, It is found from result that analysis using response seismic coefficient method is much more conservative than that using seismic displacement method Also, analysis result using earthquake response analysis method is somewhat less conservative about 25% when compared with that using seismic displacement method.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.2
• /
• pp.145-154
• /
• 2020

Objective: The purpose of this study was to determine the relationship between impact and shear peak force, and tibia-accelerometer variables during running. Method: Twenty-five male heel strike runners (mean age: 23.5±3.6 yrs, mean height: 176.3±3.3 m/s, mean mass: 71.8±9.7 kg) were recruited in this study. The peak impact and anteroposterior shear forces during treadmill running (Bertec, USA) were collected, and impact shock variables were computed by using a triaxial accelerometer (Noraxon, USA). One-way ANOVA was used to test the influence of the running speed on the parameters. Pearson's partial correlation was used to investigate the relationship between the peak impact and shear force, and accelerometer variables. Results: The running speed affected the peak impact and posterior shear force, time, slope, and peak vertical and resultant tibial acceleration, slope at heel contact. Significant correlations were noticed between the peak impact force and peak vertical and resultant tibia acceleration, and between peak impact average slope and peak vertical and resultant tibia acceleration average slope, and between posterior peak (FyP) and peak vertical tibia acceleration, and between posterior peak instantaneous slop and peak vertical tibial acceleration during running at 3 m/s. However, it was observed that correlations between peak impact average slope and peak vertical tibia acceleration average slope, between posterior peak time and peak vertical and resultant tibia acceleration time, between posterior peak instantaneous slope and peak vertical tibial acceleration instantaneous slope during running at 4 m/s. Conclusion: Careful analysis is required when investigating the linear relationship between the impact and shear force, and tibia accelerometer components during relatively fast running speed.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.356-364
• /
• 2023

Sophisticated Air Navigation System has contributed to enhancing the capacity of airspace capacity, leading to an efficient airspace environment. However, it has acted as a factor increasing the probability of collision. When an aircraft fails to maintain vertical separation and instead exhibits lateral positional errors, it does not necessarily lead to a collision. However, as the lateral positional accuracy increases, the randomness of aircraft positions decrease, resulting in an elevated probability of collisions. Consequently, The International Civil Aviation Organization has introduced Strategic Lateral Offset Procedures(SLOP), intentionally deviating aircraft from the centerline of airways. Likewise, South Korea also operates Offset procedure. The Y579 was operated using the Offset before its conversion to a dual airway and the analysis of the Offset track revealed that it was being operated similarly to a unidirectional dual airway. This paper develops a safety assessment methodology applicable to unidirectional dual airways, and applies it to perform a safety assessment of the Y579 Offset procedure.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.55-61
• /
• 1996

Finite element calculations are performed for crystalline solids subjected to plane strain tensile loading. Using Asaro's double slop model, shearband developments in single crystals are analyzed. The effect of various rate sensitivities and latent hardening parameters on microscopic plastic behavior was clarified. Moreover the deformation behavior of polycystals which have grain boundaries was compared to that of single crystals.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.05a
• /
• pp.29-33
• /
• 2001

We propose fuzzy least-squares regression analysis by few error term data and test the slop by fuzzy hypotheses membership function for fuzzy number data with agreement index. Finding the agreement index by area for fuzzy hypotheses membership function and membership function of confidence interval, we obtain the results to acceptance or reject for the test of fuzzy hypotheses.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.958-967
• /
• 2004

This paper deal with cause and analysis about case of collapsed reinforced-soil retaining wall. The analysis of the cause was carried through experimentation, slop stability analysis and literature study. The experimentation treated the large direct shear test, the hydraulic conductivity test and the other basic test through backfill extracted from collapsed reinforced-soil retaining wall. The ultimate tensile strength was established by rib tensile strength test of geogrid. The analysis of internal and external stability of reinforced-soil retaining wall was performed on the basis of parameters. The result of analysis, reinforced-soil retaining wall and the slope at the dry season are stable. However, the factors that fine-grained soil at hydrometer test exceed the standard of the design, rainfall duration is too long at the time of collapse and monthly pricipitation is heavy are cause of the collapse.

• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.4
• /
• pp.179-194
• /
• 2018

The purpose of this study is to discuss the application of the Latent Growth Model to measure the outcomes of public library. For outcome measurements, library circulation data were collected to identify longitudinal changes of library users' reading habit. The latent growth model was applied to statistically test the changes over time. The circulation data of 95,962 users registered in some public libraries in Seoul, ranged between 2010 and 2015, were analyzed using unconditional model, conditional model, and growth mixture model which all are called the latent growth model. The results show that the intercept of the model is 4.19 and the slop is 0.24 in the linear growth model. The gender difference in two latent variables including intercept and slop was a shade difference. The result from the growth mixture model analysis, additionally indicates that the number of books checked out by children under age 10 is rapidly increased. The application of the latent growth model in library fields is expected to widely spread out for the longitudinal data analysis.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.3
• /
• pp.59-66
• /
• 2019

In recent years, urban regeneration is focused on smart and pedestrian oriented development utilizing various mobility technology. The characteristics of walkways needs to reflect such development orientations. This research is the first step to find an adequate slope for ramp replacing stairs and shared by pedestrians, personal mobilities and powered wheelchairs. It aims to check if ramps on a recommended degree of angle by general guidelines are more preferred than stairs and find out what make difference of such preferences. Two surveys were conducted at $9^{\circ}$ and $9.6^{\circ}$ ramps coexisted with stairs at sequential and parallel location. The study on the survey result found that the general evaluation of $9^{\circ}$ ramp was better than $9.6^{\circ}$ ramp but $9^{\circ}$ ramp was not preferred than stairs while $9.6^{\circ}$ ramps was preferred. The difference of preferences was related to characteristics of stairs. The stair with shorter tread and riser next to $9^{\circ}$ ramp was evaluated much better than stairs next to $9.6^{\circ}$ ramp. Therefore the research concludes that $10.0^{\circ}$ which many guidelines recommend for the maximum slop of a ramp was not adequate for a ramp to replace stairs as a preferred means of vertical circulation. In addition the research found that the preference was sensitive to moving direction and gender especially in regards to comfort of stairs and safety of ramp. Most pedestrians chose a means of vertical circulation based on its comfort but pedestrian's evaluation of safety was most different based on moving direction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1535-1541
• /
• 1994

The void content of carbon fiber reinforced composite laminates was determined by the ultrasonic nondestructive technique. The ultrasonic immersion, through-transmission method developed stresses the utilization of spectral analysis and frequency dependence of the attenuation due to porosity. The measured attenuation shows approximately linear behavior over the frequency range investigated. The linear relationship between the void content and the attenuation slop (d $\alpha$/df) is found to hold, but the constant of proportionality is quite different for samples with different pore morphology. The void volume fraction determined by the attenuation slope agreed very well with that obtained by the acid digestion analysis.