• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.131-134
• /
• 1991

In order to determine an operating pattern of SLIM in an experimental MAGLEV vehicle, operating characteristics of SLIM are obtained using a disk type test facility. The test results are compared with the pre-estimated values. It is found that a closed loop control is required for operating at a constant slip-frequency condition which makes the normal force minimum.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.9
• /
• pp.928-933
• /
• 1990

In the vector controlled induction machine drives, mechanical speed sensors such as shaft encoder and resolver have been used. However, the mechanical speed sensors present some problems and restrict the wide applications of high performance AC drives. This paper describes the vector strategy with the speed estimation algorithm in which motor slip frequency is calculated. Also, the angle deviation of the rotor flux vector is calculated and instantaneously compensated to keep the q axis flux zero in the rotational reference frame.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.474-482
• /
• 1992

This paper describes the speed control system of an induction type ac servomotor drive on the vector control basis of slip frequency and constant secondary flux control for a quick torque response. The system is composed of a digital controller using a SCB-V50 microprocessor and a PWM inverter with power MOSFETs for high speed switching. And, for the measurement of actual instantaneous currents, MDCS A070-051 hall sensors are employed. The rising time of step responce by this system through the test of a 600[W] ac servomotor is 30[ms]. Overall experimental result shows that the drive performance of the system is similar to that of a separately excited armature current control of a dc motior.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.57-63
• /
• 2001

The wound rotor type induction motor(WRIM) control system which is widely used in the industry has many maintenance problem because of external resistors and magnetic contactors. In this paper, the simple sensorless vector control algorithm for WRIM is proposed without any additional devices except detecting rotor currents. Because the external resistors are disconnectd and the rotor slip rings are shorten, the power loss due to external resistors is removed and the maintenance problem is improved remarkably. Also, the vector control performance becomes better because the proposed sensorless vector control algorithm does not use the rotor resistance which is usually used to estimate the slip frequency in case of indirect vector control scheme. The proposed algorithm is verified by the digital simulation and the experiment.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.3
• /
• pp.154-161
• /
• 2005

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.177-178
• /
• 2013

To implement servo system using LIM, thrust and normal force control must be made in a moment. Thus, vector control is required to control magnetic flux and toque. In this paper, we applied to constant slip frequency vector control method by controlling d-q axis current and presented various simulation results.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.45-48
• /
• 1990

This paper deals with the control strategy for constant voltage, constant frequency (CVCF) generation of doubly-fed Induction generator. As induction machine is a nonlinear and multivariable machine, so, the influential factors for CVCF generation of induction generator are the magnitude of output voltage, load current and its power factor, slip of the machine, etc. To get appropriate control scheme and to research the effect of its parameters, the control equation of induction machine is derived and tested. The derived condition is very useful for the CVCF control of the machine and for determing the characteristics of the system. The simulation results show that magnetizing reactance and rotor resistance is a very important parameter in this control system.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.388-390
• /
• 2003

Recent trend of sensor-less control of induction motor applied for commuter trains in Japan is introduced. Although many inverter-fed Induction motor driven trains have been produced so far, most of them were slip frequency based conventional V/f control system using shaft encoder. There arises a new trend to apply speed sensor-less vector control., for this inverter-fed induction motor drive system. The purpose of sensor-less control is to save, cost and improve system reliability. Several sensor-less systems now under testing on the actual railway company. This paper describes the survey of the fundamental structure and feature of representative sensor-less systems mentioned above.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.998-1001
• /
• 2003

Recent trend of sensor-less control of induction motor applied for commuter trains in Japan is introduced. Although many inverter-fed induction motor driven trains have been produced so far, most of them were slip frequency based conventional V/f control system using shaft encoder. There arises a new trend to apply speed sensor-less vector control., for this inverter-fed induction motor drive system. The purpose of sensor-less control is to save, cost and improve system reliability. Several sensor-less systems now under testing on the actual railway company. This paper describes the survey of the fundamental structure and feature of representative sensor-less systems mentioned above.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.287-289
• /
• 1994

The ac servo system using an induction motor is so strong and inexpensive that it is most suitable for today's drive systems. For controlled ac motor drives, but slip frequency vector control system have been put to practical use, it is difficult to perform control of wide range, the same as de motor. A study is presented on an adaptive current control scheme for induction type ac servo motor drives using PWM inverter. An analysis of the control scheme in operations is given and the characteristics are studied by simulation. The implementation of the control scheme using a microprocessor-based system is considered.