• 한국지반공학회논문집
• /
• 제21권8호
• /
• pp.107-116
• /
• 2005

토목섬유로 보강된 성토사면의 안정해석시, 소요 보강재의 인장력은 토압이론에 근거하여 하나 또는 두개의 직선으로 가정된 활동면에 대하여 평형을 유지하기 위하여 필요한 보강재 인장력의 합으로부터 얻을 수 있으며, 각 층별 보강재의 인장력은 삼각형분포 또는 직사각형 분포로 가정한다. 그러나, 실제 토목섬유로 보강된 사면에 대한 현장계측결과에 및 모형실험 결과에 의하면, 보강 성토사면에서 보강재 최대인장력은 사면의 최하단에서 발생하는 것이아니라 사면내의 어느 높이에서 발생한다. 보강토체의 가상파괴면은 일반적으로 각 층의 보강재에서 최대인장력이 발생하는 위치를 연결한 선이며, 이 때 보강재의 인장력은 가상파괴면상의 응력상태와 밀접한 관련이 있다. 따라서 본 연구에서는 사면안정해석으로부터 얻은 가상활동면상의 법선응력의 분포로부터 각 층별 보강재의 인장력을 평가 할 수 있는 방법을 제안하고, 토목섬유 보강 성토사면에 대한 현장계측 사례에 대한 해석을 통하여 그 적용성을 검토 하였다. 그 결과, 본 연구에서 제안한 방법이 기존의 보강사면 설계법 보다 더 현장계측 데이터에 근접하는 각 층별 보강재 인장력을 제공해주는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.282-285
• /
• 2006

This study is to examine bond strength of beam reinforced with GFRP rebar under 4-point bending test by adopting BRITISH STANDARD. The variables were made to have bonding length of 5times$(5d_b)$, 10times$(10d_b)$ and 15times$(15d_b)$ of the nominal diameter of GFRP rebar and were done to analyze the relationship between the bonding strength and the slip. In the result of the test, pull-out failure was dominant in the $5d_b$ and $10d_b$ specimen, both patterns of the pull-out failure and concrete splitting failure appeared in the $10d_b$. On the other hand, the $15d_b$ specimen showed only concrete splitting failure at the end of bonding length. Therefore, it was prove that available bonding length of the GFRP rebar under bending condition on static test is over $15d_b$ then farther research such as fatigue bending test, development of bonding model, FEM parameter study should be performed.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.407-423
• /
• 2020

The pre-peak cyclic shear mechanism of two-order asperity degradation of rock joints in the direct shear tests with static constant normal loads (CNL) are investigated using experimental and numerical methods. The laboratory testing rock specimens contains the idealized and regular two-order triangular-shaped asperities, which represent the specific geometrical conditions of natural and irregular waviness and unevenness of rock joint surfaces, in the pre-peak cyclic shear tests. Three different shear failure patterns of two-order triangular-shaped rock joints can be found in the experiments at constant horizontal shear velocity and various static constant normal loads in the direct and pre-peak cyclic shear tests. The discrete element method is adopted to simulate the pre-peak shear failure behaviors of rock joints with two-order triangular-shaped asperities. The rock joint interfaces are simulated using a modified smooth joint model, where microscopic scale slip surfaces are applied at contacts between discrete particles in the upper and lower rock blocks. Comparing the discrete numerical results with the experimental results, the microscopic bond particle model parameters are calibrated. Effects of cyclic shear loading amplitude, static constant normal loads and initial waviness asperity angles on the pre-peak cyclic shear failure behaviors of triangular-shaped rock joints are also numerically investigated.

• 한국지반공학회논문집
• /
• 제34권12호
• /
• pp.59-69
• /
• 2018

한계평형법 이론들을 사용하기 위해서는 극한 파괴 상태에서 나타나는 파괴 전단면을 찾아야 한다. 강도 감소법에서는 유한요소해석의 수치해가 일정 반복 횟수 이내에 수렴하지 못하는 시점을 극한 파괴 상태로 정의한다. 하지만 Coupled Eulerian-Lagrangian (CEL)기법을 유한요소해석에서 사용하면 극한 파괴 상태에 도달하여도 수치해의 비수렴 상황이 발생하지 않으므로 이러한 정의는 사용하기 어렵다. 본 연구에서는 CEL 기법을 이용한 유한요소해석에서 지반의 극한 파괴 상태를 감지할 수 있는 객관적인 물리량 기준을 제시하였다. 비배수 조건의 연약지반이 연속기초 하중을 받는 경우 극한 파괴 상태에 해당하는 이론적 하중에서 소성 소산 에너지의 변화속도가 민감하게 변화함을 찾을 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.659-664
• /
• 1999

The majority of published conclusions about structural configuration effects of bond strength were based on the observed performance of test specimens and their interpretations are mostly empirical and statistical. The empirical and statistical interpretation on bond strength have to be replaced by rational models based on simple, sound and verifiable mechanical principles. It is likely that such models also represent the key to a deeper understanding of some existing experimental data on bond strength. The presented truss model is capable of explaining failure modes involving bond slip that cannot be explained by current truss model.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.61-69
• /
• 2004

신설교량의 경우 최근 개정된 도로교설계기준에 의해 내진설계를 수행하여 시공되었으나, 내진설계규정이 적용되기 이전에 시공되어 사용중에 있는 철근콘크리트 교각의 경우에는 지진에 의한 횡하중에 대해 취약할 수 있다. 특히 형상비가 큰 기존 교각에서는 기초와 교각 접합부에 주철근 겹침이음이 존재하므로 지진이 발생할 경우 피복콘크리트 파손에 따른 부착파괴 형태의 급격한 취성파괴 거동을 나타낸다. 이러한 부착파괴가 일어나는 소성힌지 구간에 FRP 적층 원통관으로 보강하여 부착강도를 크게 함으로써 횡하중에 대한 급격한 파괴를 예방할 수 있다. 따라서 본 연구에서는 FRP 적층 원통관으로 보강된 원형교각에서 FRP 적층 원통관이 주는 구속효과를 효과적으로 산정하기 위한 이론식을 유도하여 제안하고자 하였다. 이를 위해 FRP 적층 원통관이 철근콘크리트 원형교각에 발생시키는 구속응력을 이론적으로 유도하여 제안하였으며, 제안된 식의 타당성을 검증하기 위해 기존의 타 연구에서 수행한 실험결과와 비교, 검토하였다. 또한 다양한 FRP 적층조건에 따른 구속응력의 변화를 고찰하기 위한 매개변수 연구를 수행하였다. 이와 같은 연구를 통해 본 연구에서 제안하는 식이 FRP 적층 원통관을 이용하여 보강한 기존 원형교각의 거동을 잘 예측할 수 있음을 확인하였으며, 적층수, 섬유배향각, 섬유방향의 탄성계수가 FRP 적층 원통관에 의한 내진보강효과에 가장 지배적인 매개인자임을 알 수가 있었다.

• Computers and Concrete
• /
• 제10권5호
• /
• pp.489-505
• /
• 2012

This paper presents a simplified grid beam model for simulating the nonlinear response of reinforced concrete flat-plate structures. The beam elements are defined with nonlinear behavior for bending moment and torsion. The flexural stiffness and torsional strength of the beam elements are defined based on experimental data to implicitly account for slab two-way bending effects. A failure criterion that considers the interaction between the punching strength and slab flexural behavior is incorporated in the model. The effects of bond-slip of slab reinforcement on connection stiffness are examined. The proposed grid beam model is validated by simulating large-scale tests of slab-column connections subjected to concentric gravity loading and unbalanced moment. This study also determines the critical parameters for a hysteretic model used to simulate flat-plates subjected to cyclic lateral loading.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.339-342
• /
• 2003

The bridge columns with lap-splice reinforcements in earthquake suffered a brittle bond-slip failure due to deterioration of the lap-spliced longitudinal reinforcements without developing its flexural capacity or ductility. In this case, such a brittle failure can be controlled by the seismic retrofit using FRP wrapping. The retrofitted columns using FRP wrapping showed significant improvement in seismic performance due to FRP's confinement effect. This paper presents the circumferential confinement effect of existing circular bridge pier strengthened with FRP wrapping for poor lap-splice details. The effects on the confinement of FRP wrapping, such as gap lengths between footing and FRP, fiber orientations, and thicknesses of FRP, were investigated by quasi-static experiments.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.280-287
• /
• 2003

The bridge columns with lap-splice reinforcements in earthquake suffered a brittle bond-slip failure due to the deterioration of lap-spliced longitudinal reinforcement without developing its flexural capacity or ductility. In this case, such a brittle failure can be controlled by the seismic retrofit using FRP wrapping. The retrofitted columns using FRP laminated circular tube showed significant improvement in seismic performance due to FRP's confinement effect. This paper presents the circumferential confinement effect of existing circular bridge pier strengthened with FRP wrapping for poor lap-splice details. The effects on the confinement of FRP wrapping, such as gap lengths between footing and FRP, fiber orientations, and thicknesses of FRP, were investigated by Quasi-static experiments.

• Geomechanics and Engineering
• /
• 제22권4호
• /
• pp.319-328
• /
• 2020

This paper investigates the effect of the width of failure and tension crack (TC) on the stability of cohesive-frictional soil slopes in three dimensions. Working analytically, the slip surface and the tension crack are considered to have spheroid and cylindrical shape respectively, although the case of tension crack having planar, vertical surface is also discussed; the latter was found to return higher safety factor values. Because at the initiation of a purely rotational slide along a spheroid surface no shear forces develop inside the failure mass, the rigid body concept is conveniently used; in this respect, the validity of the rigid body concept is discussed, whilst it is supported by comparison examples. Stability tables are given for fully drained and fully saturated slopes without TC, with non-filled TC as well as with fully-filled TC. Among the main findings is that, the width of failure corresponding to the minimum safety factor value is not always infinite, but it is affected by the triggering factor for failure (e.g., water acting as pore pressures and/or as hydrostatic force in the TC). More specifically, it was found that, when a slope is near its limit equilibrium and under the influence of a triggering factor, the minimum safety factor value corresponds to a near spherical failure mechanism, even if the triggering factor (e.g., pore-water pressures) acts uniformly along the third dimension. Moreover, it was found that, the effect of tension crack is much greater when the stability of slopes is studied in three dimensions; indeed, safety factor values comparable to the 2D case are obtained.