• 한국지능시스템학회논문지
• /
• 제12권6호
• /
• pp.524-530
• /
• 2002

본 연구에서는 Sugeno-type 퍼지시스템을 이용하여 계단형 퍼지 이동 슬라이딩 평면을 구성하고 이를 이용한 슬라이딩 모드제어방식을 제안한다 이 퍼지시스템은 위상평면 상에서 상태오차벡터가 이루는 각도와 원점과의 거리를 입력으로 가지며 출력으로 1차 선형방정식을 갖는다. 이 퍼지 슬라이딩 평면을 이용하여 초기 상태를 이 평면상에 위치시키고 이 슬라이딩 평면을 회전시키거나 이동시킴으로써 도달시간을 줄이고 추적시간을 줄인다. 제안된 이동 슬라이딩 평면은 개념적으로 계단형의 이산적인 형태를 가지지만 이 평면이 퍼지시스템으로 구성되기 때문에 연속으로 이동하는 특징을 나타낸다. 제안된 퍼지 슬라이딩 평면에 대한 슬라이딩 모드의 동특성이 안정함을 증명하며 이를 2차 예제시스템을 이용하여 그 타당성을 보인다.

• 터널과지하공간
• /
• 제29권5호
• /
• pp.332-345
• /
• 2019

평사투영도에서 불연속면을 대표하는 유일한 점으로 정의되는 최대경사벡터를 해당 면의 경사와 경사방향에 의거하여 형성하였다. 평사투영해석에서 평면의 극점이 대원과 역방향에 제도되는 것에 비해 최대경사벡터는 대원의 최대 경사지점에 위치하여 불연속면의 미끄러짐 방향을 직접 투영도 상에서 지시한다. 투영도 상에서 불연속면의 거동방향을 직접적으로 지시하는 최대경사벡터를 활용하여 평면 및 전도파괴 양상을 직관적으로 확인하였다. 특히 평면 파괴의 경우 블록의 옆면을 형성하는 고 경사 절리의 존재를 확인하여 실제 미끄러짐 블록의 형성가능성을 산정하였다. 또한 사면 방향과 반대방향을 갖는 고경사절리들의 존재를 확인하여 3각형 단면을 갖는 미끄러짐 블록의 형성여부를 판별하고 안전율을 도출하였으며, 4각형 단면을 갖는 가장 취약한 블록의 안전율과 비교분석하였다. 쐐기파괴 경우에는 절리면 교차에 의해 형성되는 쐐기의 기저선 방향이 최대경사벡터 속성을 지니고 있어 쐐기파괴 영역을 평면 및 전도파괴 영역이 제도된 투영도 상에 함께 도시하여 분석을 수행하였다. 특히 쐐기 상부 면을 형성하는 절리를 추출할 수 있어 전체 쐐기형상을 추정하고 역학적 거동분석을 수행하는데 요구되는 쐐기의 기하학적 특성자료를 도출하는 토대를 확립하였다.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.597-604
• /
• 2001

Recently, the study of the moving sliding mode in the variable structure control is in progress ac-tively. The conventional time-invariant sliding model control can\`t guarantee the sliding mode in the reaching phase, which is robust against the uncertainty. But with the time-varying method, the controller makes the states track the desired trajectories and keeps the sliding mode. Nevertheless, the piecewise continuous method of the past still has the reaching mode. Thus we propose the continuously moving sliding surface by the fuzzy algorithm. The proposed algorithm is made of the fuzzy rule considering both the error and the error velocity, and may apply to the entire phase plane without sacrificing sliding mode. Especially the proposed scheme can rotate tot he slope-decreasing direction, needless to say rotating to the slope-increasing direction. For showing that the proposed controller guarantees the sliding model and ensures the robustness, we apply the proposed method to the two-link robot manipulator simulation.

• Tribology and Lubricants
• /
• 제18권3호
• /
• pp.219-227
• /
• 2002

A linear elastic fracture mechanics analysis of double subsurface cracks propagation in a half-space subjected to moving thermomechanical surface traction was performed using the finite element method. The effect of frictional heat at the sliding surface on the crack growth behavior is analyzed in terms of the thermal load and peclet number. The crack propagation direction is predicted in light of the magnitudes of the maximum shear and tensile stress intensity factor ranges. When moving thermomechanical surface traction exists, subsurface horizontal cracks are propagation in-plane crack growth rate at the beginning but they are propagation out-of-plane crack growth rate by the frictional heat which is occurrence by the repeated sliding contact.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.60-63
• /
• 1988

An adaptive model following controller is designed using the theory of variable structure systems. The proposed method allows the designer to satisfy the requirements of short sliding plane reaching time and chattering reduction in the sliding mode. This method is based on the modified condition for the sliding mode. The result of computer simulation shows that state trajectories reach switching plane fast and chattering is reduced.

• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.27-34
• /
• 1989

可變 構造 시스템 理論을 適用한 適應 모델 追從 制御器를 設計 하였다. 變形된 슬라이딩 모드 條件을 滿足시키는 提案된 制御器는 狀態 軌跡의 슬라이딩 平面 到達 速度를 改善하고 슬라이딩 모드에서 채터링의 크기를 줄이도록 한다. 슬라이딩 平面 近處의 領域에서 制御入力을 바꿈으로써 채터링을 줄이고 이 結果를 컴퓨터 시뮬레이션을 통하여 立證하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.50-58
• /
• 2000

A linear elastic fracture mechanics analysis of multiful subsurface cracks propagation in a half-space subjected to moving thermomechanical surface traction was peformed using the finite element method. The effect of frictional heat at the sliding surface on the crack growth behavior is analyzed in terms of the thermal load and peclet number. The crack propagation direction is predicted in light of the magnitudes of the maximum shear and tensile stress intensity factor ranges. When moving thermomechanical surface traction exists, subsurface horizontal cracks are propagation in-plane crack growth rate at the beginning but they are propagation out-of-plane crack growth rate by the frictional heat which is occurrence by the repeated sliding contact.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 봄 학술발표회 논문집
• /
• pp.84-90
• /
• 1991

Underground structures usually consist of rock masses or concretes which can be cracked or have cracks. This study aims to develop an analysis program which can deal with the effect of discontinuous behavior due to those cracks using the block theory. It is assumed that rock masses form blocks along the discontinuity lines, and deformation within the block is relatively small. The behavior of discontinuity plane of the structures is divided into sliding along the discontinuity plane. separation of discontinuity by tensile force, and degradation of asperity angle of discontinuity plane by external force with sliding of rock Basses. These behaviors are implemented using constitutive relation and relevent load-displacement relation defined through normal and shear stiffnesses. Time varying displacements and block velocities are calculated by explicit time stepping algorithm. The effect of rock supports including rockbolts is also considered, and the tending effects which occurs in relatively thin lining is also considered.

• 제어로봇시스템학회논문지
• /
• 제2권2호
• /
• pp.115-120
• /
• 1996

In this paper, a sliding mode controller which is characterized by high accuracy, fast response and robustness is applied to speed control of AC-SERVO motor. The control input is changed to the continuous one in the boundary layer to reduce the chattering phenomenon, and the boundary layer converges to zero when the state variables of system reach to steady state values. The integral compensator is added to reduce steady state error and to provide the continuous torque reference. The acceleration which is necessary for the sliding plane is estimated by an obsever. Sliding surface is included in control input to enhance the robustness and transient response without increasing sliding mode controller gain. The proposed controller is implemented by DSP(digital signal processor). The effectiveness of the proposed scheme is demonstrated through experimental works.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.280-282
• /
• 1994

This paper proposes sliding mode state for robust speed control of induction motor. Sliding mode state observer is robust for measurement noise, modeling-error and load disturbance. The pole of sliding mode state observer can be placed at (0,0) in Z-plane for fast response. This method is, namely, deadbeat control. Sliding mode state observer output is discontinuous on a switching hyperplance, that causes harmful effects such as current harmonics and speed oscillation. In this paper, also the reducing method of the chattering of sliding mode state observer output is proposed. The proposed system is digitally implemented with TMS320C31.