• 한국시뮬레이션학회논문지
• /
• 제11권4호
• /
• pp.57-68
• /
• 2002

The analysis of the cyclic scheduling problem in FMS using the transitive matrix has been proposed. Since the transitive matrix may explain all the relations between the places and transitions, we propose an algorithm to get good solution after slicing off some subnets from the original net based on machines operations. For analyzing the schedule problem, we considered two time functions such as produce time and waiting time using the P-invariant. In addition, we are shown the effectiveness of proposed algorithm after comparing with unfolding algorithms.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.289-291
• /
• 2003

Selective logging is currently a widely adopted management practice throughout the tropics. Monitoring of spatial extent and intensity of such logging is, therefore, becoming an important issue for sustainable management of forest. This study explores the possibility of using vegetation indices and Landsat 7 ETM+ image for this purpose. Two dataset acquired on 2002 and 2000 of Labanan concession area East Kalimantan, Indonesia were used. Three different vegetation indices (MSAVI, SAVI and NDVI) slicing and differentiating methods were tested. The results showed that the MSAVI is superior with overall accuracy of 77% and kappa 0.64.

• 한국패션뷰티학회지
• /
• 제1권1호
• /
• pp.105-118
• /
• 2003

The purpose of this study was to analyze entertainer Byeon Jeong-su's hair styles and thereby, apply the results to models. For the applications, models' hair styles were bisected into two sections, and thereby, the edges of the outsides were cut into solid points, and thereupon, into diverse bases by using vertical section, Perpendicular direction and square angles. On the other hand, the insides were cut in the same way of the outside bases by using radial section, varied combing and $45{\sim}90$ degree head angles. In addition, tops and sides were arranged in their corners, while a graduation technique was used to express a natural difference of levels. The fringes were cut by using free-hand and slicing techniques. furthermore, the quantity and mass of the hairs were treated with such techniques as thinning, swing, effect, rolling, slide and slicing, while a bridge product was used for coloring together with a highlight technique. The hair styles were rendered for straight and wave by using an magic iron machine. It was confirmed through this study that the same cutting techniques would result in different images depending on individuals' physical shapes, facial shapes, head skeletons and types of hairs. Thus, it is required of the hair designers to suggest their own custom hair designs adequate to individuals' images through continued image-wise hair design practices.

• Applied Biological Chemistry
• /
• 제37권1호
• /
• pp.49-55
• /
• 1994

벼잎의 산성용액 추출물로부터 ion exchange chromatography chitin affinity chromatography chromatofocusing gel slicing 등의 방법으로 단백질 RCG-2를 순수분리하였다. 본 단백질은 chitin과 laminarin을 가수분해하므로 chitinase와 ${\beta}-1,3-glucanase$ 활성을 함께 보유하고 있는 것으로 나타났으며, 이외에도 M. lysodeiktikus cell wall을 가수분해하는 lysozyme 활성도 보유하는 것으로 판명되었다. 분자량이 29.77 kd인 본 효소의 chitinase 활성은 pH 4.0에서, ${\beta}-1,3-glucanase$ 활성은 pH 7.0에서 최대로 나타났고, 최적온도는 두 효소 활성 모두 $40^{\circ}C$ 이었다. chitin에 대한 $K_M$ 값은 7.86 mM, $V_{max}$는 $0.025\;{\mu}M/min$, laminarin $({\beta}-1,3-glucan)$에 대한 것은 각각 5.95 mM, $0.16{\mu}\;M/min.$ 이었으며, 정제된 효소는 chitin을 chitooligosaccharide로 분해하는 것으로 나타나서 endochitinase로 판명되었다.

• 한국CDE학회논문집
• /
• 제2권3호
• /
• pp.195-210
• /
• 1997

In Rapid Prototyping process, the time required to build multiple prototype parts can be reduced by packing several parts optimally in a work volume. Interactive arrangement of the multiple parts is a tedious process and does not guarantee the optimal placement of all the parts. In this case, packing is a kind of 3-D nesting problem because parts are represented by STL files with 3-D information. 3-D nesting is well known to be a problem requiring an intense computation and an efficient algorithm to solve the problem is still under investigation. This paper proposes that packing 3-D parts can be simplified into a 2-D irregular polygon nesting problem by using the characteristic of rapid prototyping process that the process uses 2-dimensional slicing data of the parts and that slice of the STL parts are composed of polygons. Our algorithm uses no-fit-polygon (NFP) to place each slice without overlapping other slices in the same z-level. The allowable position of one part at a fixed orientation for given parts already packed can be determined by obtaining the union of all NFP's that are obtained from each slice of the part. Genetic algorithm is used to determine the order of parts to be placed and orientations of each part for the optimal packing. Optimal orientation of a part is determined while rotating it about the axis normal to the slice by finite angles and flipping upside down. This algorithm can be applied to any rapid prototyping process that does not need support structures.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.34-42
• /
• 2014

본 논문에서는 두 개의 공간 스트림을 갖는 multiple-input multiple-output 시스템을 위한 modified maximum-likelihood 심볼 검파 알고리즘 기반의 저 복잡도 고 성능의 심볼 검파기의 구조를 제시하고 이를 구현한 결과를 보인다. 제안하는 심볼 검파기에서는 비용함수 계산 과정에서의 각 심볼 별로 병렬적으로 계산되던 곱셈 연산을 멀티 사이클 기반의 점증적인 덧셈 연산으로 대체하였다. 또한 양자화 과정을 파이프 라인 구조를 적용하여 성상의 범위에 따라 단계적으로 수행할 수 있게 구현하였다. 그 결과 제안하는 심볼 검파기는 256 QAM과 같이 복잡한 변조 방식을 지원하면서도 하드웨어 복잡도가 낮다. 양자화 과정의 파이프 라인을 재구성함으로써 여러 변조 방식과 안테나 환경에서의 심볼 검파를 유연하게 지원한다. 설계된 심볼 검파기는 $0.11-{\mu}m$ CMOS 공정의 라이브러리를 사용하여 최대 478 MHz의 동작주파수에서 38.7K의 논리 게이트로 구현되어 16 QAM에서 166Mbps, 64 QAM에서 80 Mbps의 처리량을 달성한다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권3호
• /
• pp.1149-1155
• /
• 2016

Background: Examination of sentinel lymph node (SLN) biopsies provides accurate nodal staging for breast cancer and plays a key role in patient management. Procurement of SLNs and the methods used to process specimens are equally important. Increasing the level of detail in histopathological examination of SLNs increases detection of metastatic tumours but will also increase the burden of busy laboratories and thus may not be carried out routinely. Recommendation of a reasonable standard in SLN examination is required to ensure high sensitivity of results while maintaining a manageable practice workload. Materials and Methods: Twenty-four patients with clinically node-negative breast cancer were recruited. Combined radiotracer and blue dye methods were used for identification of SLNs. The nodes were thinly sliced and embedded. Serial sectioning and immunohistochemical (IHC) staining against AE1/AE3 were performed if initial H&E sections of the blocks were negative. Results: SLNs were successfully identified in all patients. Ten cases had nodal metastases with 7 detected in SLNs and 3 detected only in axillary nodes (false negative rate, FNR=30%). Some 5 out of 7 metastatic lesions in the SLNs (71.4%) were detected in initial sections of the thinly sliced tissue. Serial sectioning detected the remaining two cases with either micrometastases or isolated tumour cells (ITC). Conclusions: Thin slicing of tissue to 3-5mm thickness and serial sectioning improved the detection of micro and macro-metastases but the additional burden of serial sectioning gave low yield of micrometastases or ITC and may not be cost effective. IHC validation did not further increase sensitivity of detection. Therefore its use should only be limited to confirmation of suspicious lesions. False negative cases where SLNs were not involved could be due to skipped metastases to non-sentinel nodes or poor technique during procurement, resulting in missed detection of actual SLNs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• 한국정보처리학회논문지
• /
• 제6권6호
• /
• pp.1542-1555
• /
• 1999

본 논문에서는 C++ 클래스 계층구조(상속관계를 가진 클래스들의 모음)를 대상으로 객체 지향 언어의 특성인 단일/다중 상속, 정적/동적 바인딩, 함수중복/함수재정의(Overloading & Overriding), 순수가상/가상함수, 생성자 문제를 고려하여 멤버데이터와 멤버함수를 최적화 할 수 있는 알고리즘을 제안한다. 프로그램 계층 구조와 그 계층 구조를 사용하는 프로그램은 일반적으로 클래스 계층 구조의 부분적인 기능만을 사용하기 때문에 많은 구성요소를 포함하는 클래스들에서 불필요한 기능을 제거하는 것이 필요하게 되었다. 지금까지 연구되어 왔던 고전적인 슬라이싱이나 다른 변형된 슬라이싱은 출력데이터를 선택하고 그와 관련된 프로그램 문장을 포함하는데 초점을 맞추고 있다. 그 대상은 대부분 구조적 프로그램 언어로 이루어졌으며 이러한 슬라이싱은 주로 오류 검출, 소프트웨어의 유지보수, 유연한 테스팅을 위한 주제로 연구가 되어 왔다. 본 논문에서는 그 대상 범위를 객체 지향 언어로 확장시키고, 분석단계에서 테이블 구성형태를 링크형태로 구성함으로써 보다 정보관리의 효율을 높일 수 있고, 이 테이블을 이용한 최적화 시스템 구현을 통해 필요한 알고리즘을 제시하였다. 이러한 과정을 통해 불필요한 멤버데이터, 멤버함수, 클래스 상속관계를 제거함으로 프로그램 코드의 간소화, 시스템 성능의 향상을 가져올 수 있다.

• 한국재료학회지
• /
• 제21권6호
• /
• pp.334-340
• /
• 2011

Saw wires have been widely used in industries to slice silicon (Si) ingots into thin wafers for semiconductor fabrication. This study investigated the microstructural and mechanical properties, such as abrasive wear and tensile properties, of a saw wire sample of 0.84 wt.% carbon steel with a 120 ${\mu}M$ diameter. The samples were subjected to heat treatment at different linear velocities of the wire during the patenting process and two different wear tests were performed, 2-body abrasive wear (grinding) and 3-body abrasive wear (rolling wear) tests. With an increasing linear velocity of the wire, the tensile strength and microhardness of the samples increased, whereas the interlamellar spacing in a pearlite structure decreased. The wear properties from the grinding and rolling wear tests exhibited an opposite tendency. The weight loss resulting from grinding was mainly affected by the tensile strength and microhardness, while the diameter loss obtained from rolling wear was affected by elongation or ductility of the samples. This result demonstrates that the wear mechanism in the 3-body wear test is much different from that for the 2-body abrasive wear test. The ultra-high tensile strength of the saw wire produced by the drawing process was attributed to the pearlite microstructure with very small interlamellar spacing as well as the high density of dislocation.