• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.417-422
• /
• 2011

This paper presents the characteristics of PM eddy current loss and harmonic iron loss for PM step-skewed Interior Permanent Magnet Synchronous Motor (IPMSM) with concentrated windings and multi-layered PM under the running condition of maximum torque per ampere (MTPA) and flux-weakening control. In particular, PM eddy current loss and harmonic iron loss in IPMSM have been numerically computed with three-dimensional Finite Element Analysis (3D FEA), whereby IPMSM with concentrated windings and multi-layered PM has been designed to identify the optimized skew angle contributing to the reduced PM eddy current loss and torque ripples, while maintaining the required average torque. Furthermore, numerical investigation on PM eddy current loss and iron loss at MTPA and flux-weakening control has been carried-out in terms of PM step-skew.

• Journal of Korean Society for Atmospheric Environment
• /
• v.1 no.1
• /
• pp.9-15
• /
• 1985

For the purpose of obtaining the index that represents the contaminated status due to polychlorinated biphenyls (PCB) in the human body, the authors investigated the contents of PCB in the plasma of 183 subjects who were not exposured to the massive amount of PCB occupationaly in the past. The obtained results were as follows; 1. The mean contents of PCB in plasma were 3.35 $\pm$ 1.48 ppb in male and 3.04 $\pm$ 1.06 ppb in female. $Cl_4$ and $Cl_3$ were the main isomers in both sexes. 2. The distribution of total-PCB by the age group was showed increasing tendency with the age in both sexes. 3. The tendency of freqyency distribution of total-PCB level were skewed to the higher level in malo and skewed to the lower level in female. 4. There was satistically significant interrelationship between age and total-PCB in plasma in both sexes.

• The Journal of the Korean life insurance medical association
• /
• v.3 no.1
• /
• pp.219-232
• /
• 1986

A study on establishment of normal range of cardiothoracic ratio calculated from photofluorography film of chest by age and sex in a total of the 6,598 insureds was undertaken. The results were as follows: 1. In male group, the frequency distribution of cardiothoracic ratio was skewed weakly to the right in second decade, symmetrical in third and fourth decade, and was skewed weakly to the left in fifth and sixth decade; in female group, it was skewed weakly to the left in second, third and fourth decade, and was skewed weakly to the right in fifth and sixth decade. 2. On assumption that normal range of cardiothoracic ratio should comprise about 85% of all cardiothoracic ratios in each age group of both sexes, the sites of deviation from mean value of cardiothoracic ratio corresponding to maximum and minimum cardiothoracic ratio in the range of about 85% above mentioned were detected by statistical method on the frequency distribution of log tranformed cardiothoracic ratio, and $M{\pm}1.3$ sindicating normal range of cardiothoracic ratio was determined. In male group, normal range of cardiothoracic ratio determined by statistical method is 35-45%, 40-50%, 40-50%, 40-50% and 40-50% succesively in order from second to sixth decade; in female group, 40-50%, 40-50%, 40-50%, 45-55% and 45-55%.

• Journal of Institute of Convergence Technology
• /
• v.1 no.2
• /
• pp.6-15
• /
• 2011

This paper reports the design and fabrication of a micro-electro-mechanical-system(MEMS)-based electrostatic angular microactuator for a dual-stage servo. The proposed actuator employs a novel electrode pattern named "skewed electrode array(SEA)" scheme. It is shown that SEA has better linearity than a parallel plate type actuator and stronger force than a comb-drive based actuator. The moving and the fixed electrodes are arranged to make the driving force perpendicular to the rotating moment of arm. By changing the electrode overlap length, the magnitude of electrostatic force and stable displacement will be changed. In order to optimize the design, an electrostatic FE analysis was carried out and an empirical force model was established for SEA. A new assembly method which will allow the active electrodes to be located beneath the slider was developed. The active electrodes are connected by inner and outer rings lifted on the base substrate, and the inner and outer rings are connected to platform on which the slider locates. Electrostatic force between active electrodes and platform can be used for exiting out of plane modes, so this provides the possibility of the flying height control. A microactuator that can position the pico-slider over ${\pm}0.5{\mu}m$ using under 20 volts for a 2 kHz fine-tracking servo was designed and fabricated using SoG process.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.216-219
• /
• 2013

In this paper, the influence of inverter switching harmonics on iron loss and PM loss of Permanent Magnet Synchronous Motor (PMSM) is numerically investigated by Finite Element Method (FEM). In particular, nonlinear FEM is applied for a multi-layered PM Synchronous Motors (PMSMs), Interior buried PMSM (IPMSM) and PM assisted Synchronous Reluctance Motor (PMa-SynRM), which are adoptively designed and compared for Electric Vehicle (EV) propulsion. In particular, iron loss and PM eddy-current loss under the real current waveform including the carrier harmonics from inverter switching are numerically analyzed with nonlinear FEM by considering the skewed stator structure employed for minimizing spatial harmonics.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.614-626
• /
• 2006

Using the data of three environmental monitoring sites in Pohang area(KME112, KME113, and KME114), statistical forecasting models of the daily maximum and mean values of PM10 have been developed. Since the distributions of the daily maximum and mean PM10 values are skewed, which are similar to the Weibull distribution, these values were log-transformed to increase prediction accuracy by approximating the normal distribution. Three statistical forecasting models, which are regression, neural networks(NN) and support vector regression(SVR), were built using the log-transformed response variables, i.e., log(max(PM10)) or log(mean (PM10)). Also, the forecasting models were validated by the measure of RMSE, CORR, and IOA for the model comparison and accuracy. The improvement rate of IOA before and after the log-transformation in the daily maximum PM10 prediction was 12.7% for the regression and 22.5% for NN. In particular, 42.7% was improved for SVR method. In the case of the daily mean PM10 prediction, IOA value was improved by 5.1% for regression, 6.5% for NN, and 6.3% for SVR method. As a conclusion, SVR method was found to be performed better than the other methods in the point of the model accuracy and fitness views.

• Journal of Food Hygiene and Safety
• /
• v.24 no.4
• /
• pp.385-390
• /
• 2009

This survey was conducted to monitor the total sugar, sodium, and artificial sweetener contents of light meals from the school zone in Gwangju, from November, 2008 to April, 2009. A total of 100 samples were tested. HPLC/ELSD was used for the determination of total sugar contents and AAS for sodium contents. Total sugar amounts were the sum of both mono-and disaccharide according to nutritional information standard defined by the Korea Food and Drug Administration. The results were as follows by the form of total sugar content(sodium content): $5.7\;{\pm}\;1.9%$($4.6\;{\pm}\;1.6\;mg/g$) for Tteokbokki, $7.6\;{\pm}\;5.1%$($5.4\;{\pm}\;2.7\;mg/g$) for Chicken(skewed), $15.4\;{\pm}\;3.2%$($3.0\;{\pm}\;0.9\;mg/g$) for Bun(fish-shaped), $0.6\;{\pm}\;0.3%$($3.7\;{\pm}\;1.0\;mg/g$) for Sundae, $0.9\;{\pm}\;0.3%$($7.4\;{\pm}\;1.4\;mg/g$) for Oden(with broth), $20.5\;{\pm}\;6.2%$($2.9\;{\pm}\;0.6\;mg/g$) for Waffle, $6.8\;{\pm}\;2.2%$($4.7\;{\pm}\;1.0\;mg/g$) for Hotdog, $14.2\;{\pm}\;2.8%$($3.1\;{\pm}\;1.6\;mg/g$) for Hotteok, $6.6\;{\pm}\;2.1%$($3.9\;{\pm}\;0.6\;mg/g$) for Toast, $10.1\;{\pm}\;3.7%$($2.3\;{\pm}\;0.7\;mg/g$) for Fry(sweet potato), $1.6\;{\pm}\;0.7%$($4.0\;{\pm}\;0.7\;mg/g$) for Fry(etc), and $9.3\;{\pm}\;2.4%$($4.0\;{\pm}\;0.6\;mg/g$) for Doughnut. In addition, sodium saccharin, one of the artificial sweeteners, was tested. Among 60 samples from February to April, 2009, 11 samples had sodium saccharin(6.7~101.0 mg/kg).

• Restorative Dentistry and Endodontics
• /
• v.27 no.3
• /
• pp.299-309
• /
• 2002

The purposes of this study were to evaluate the microtensile bond strength of one-step adhesives accord ing to various dentin surface treatments and to observe the interface between resin(Z-100$^{TM}$) and dentin under SEM. In this study forty-five non-caries extracted human molars and three adhesive systems were used ; AlI-Bond 2(AB), One-Up Bond F(OU), AQ-Bond(AQ). ; In Group 1, 2, 3, AB was used and tooth surfaces were treated by smearing(S), ultrasonic cleansing(US), etching(E) respectively. In Group 4. 5, 6, One-Up Bond F was used and tooth surfaces were also treated as the same way above. In Groups 7, 8, 9, AQ Bond was used and tooth surfaces wet$.$e treated as the same way. Each specimen was prepared for microtensile bond testing, and were stored for 24hrs in 37$^{\circ}C$ distilled water. After that, microtensile bond strength for each specimen was measured. Specimens were fabricated to examine the failure patterns of interface between resin and dentin and observed under the SEM. The results were as follows ; 1. The results(mean$\pm$SD) of microtensile test were group 1, 25.69$\pm$4.31MPa; group 2, 40.93$\pm$10.94MPa; group 3, 47.65$\pm$8.85MPa； group 4, 35.98$\pm$9.14MPa； group 5, 39.66$\pm$8.45MPa; group 6, 43.26$\pm$13.01MPa; group 7, 25.07$\pm$4.2MPa；group 8, 30.4$\pm$4.74MPa；group 9, 33.61$\pm$7.88MPa. 2. One-Up Bond F was showed the highest value of 36.98$\pm$9.14MPa in dentin surface treatment with smearing, and there were significant differences to the other groups (p<0.05). 3. All-Bond 2 was showed the highest value of 40.93$\pm$10.94MPa in dentin surface treatment with ultra-sonic cleansing, but was no significant difference to One-Up Bond F(p>0.05) 4. All-Bond 2 was showed the highest value of 47.65$\pm$8.85MPa in dentin surface treatment with etch ing(10%phosphoric acid), and there were significant differences to the other groups(p<0.05). 5. All-Bond 2 was showed the highest value of 47.65$\pm$8.85MPa in dentin surface treatment according to manufacture's directions. but was no significant difference to One-Up Bond F(p>0.05). 6. AQ Bond was skewed the lowest microtensile bond strength with various dentin surface treatment, and the were significant differences to the other groups(p<0.05).

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.2 s.38
• /
• pp.172-179
• /
• 1992

The author investigated the zinc concentrations in sera of 110 methamphetaimine abusers (male 87, female 23) and of 41 healthy official workers(male 29, female 12) using inductively coupled plasma emission spectrometer. The serum zinc concentrations were analysed according to hepatitis C virus antibody(Anti HCV), hepatitis B surface antigen(HBsAg) and alanine aminotransferase(ALT) value in both groups. The analytical results were obtained as follows 1. The mean zinc concentration of MAP abuser group($298.5{\pm]246.9{\mu}g/100ml$) was 2.5 times higher than that of control group($118.8{\pm}25.4{\mu}g/100ml$). 2. The distributions of zinc concentration in both groups were skewed pattern. 3. The zinc concentrations were higher in Anti HCV-positive group and abnormal ALT value group than Anti HCV-negative group and normal ALT value group. But HBs-Ag positive group had lower zinc concentration than HBs-Ag negative group. 4. The number of anti HCV-positive subjects was increased and the zinc concentrations were decreasd in proportion to the abusing duration of MAP.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.2
• /
• pp.58-61
• /
• 2015

Objective: The XIST gene is considered to be an attractive candidate gene for skewed X-chromosome inactivation and a possible cause of primary ovarian insufficiency (POI). The purpose of this study was to investigate whether the XIST gene promoter mutation is associated with idiopathic POI in a sample of the Korean population. Methods: Subjects consisted of 102 idiopathic POI patients and 113 healthy controls with normal menstrual cycles. Patients with the following known causes of POI were excluded in advance: cytogenetic abnormalities, prior chemo- or radiotherapy, or prior bilateral oophorectomy. Genotyping was performed using polymerase chain reaction-restriction fragment length polymorphism analysis. Results: The mean age of onset of ovarian insufficiency was $28.7{\pm}8.5years$ and the mean values of serum luteinizing and follicle-stimulating hormones and estradiol in the POI group were $31.4{\pm}18.2mIU/mL$, $74.5{\pm}41.1mIU/mL$, and $30.5{\pm}36.7pg/mL$, respectively. We found no cytosine to guanine (C43G) variation in the XIST gene in both POI patients and controls. Conclusion: The C43G mutation in the promoter region of the XIST gene was not present in the Korean patients with idiopathic POI in our study, in contrast to our expectation, suggesting that the role of XIST in the pathogenesis of POI is not yet clear.