• Title/Summary/Keyword: Skeletal malocclusion

Search Result 405, Processing Time 0.018 seconds

SOFT TISSUE CHANGES FOLLOWING BIMAXILLARY SURGERY IN SKELETAL CLASS III MALOCCLUSION PATIENTS (골격성 III급 부정교합 환자에서 양악 수술후 연조직 변화에 대한 연구)

  • Park, Hong-Ju;Choi, Hong-Ran;Ryu, Sun-Youl
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.20 no.4
    • /
    • pp.284-290
    • /
    • 1998
  • The purpose of this study was to assess the soft tissue changes using twenty skeletal class III malocclusion patients who treated with bimaxillary surgery for the correction of dentofacial deformities. Patients were divided into two groups. One was impaction and advancement of maxilla with mandibular set-back (Group 1), the other was downward and advancement of maxilla with mandibular set-back (Group 2). Preoperative and postoperative one year cephalometric data were analyzed and compared. Results obtained were as follows: 1. The ratio of horizontal changes of soft tissue to hard tissue at Nt to ANS, Ls to UI, Li to LI, sPog to Pog were 1:0.60, 1:0.79, 1:0.47, 1:0.63 in group 1 respectively, and 1:0.59, 1:0.48, 1:0.83, 1:1.09 in group 2 respectively. Soft tissue changes were highly predictable at the upper lip, lower lip, and chin area. 2. The ratio of vertical changes of soft tissue to hard tissue at Nt to ANS, Li to LI were 1:0.72, 1:0.06 in group 1, and others showed no statistically significant difference. 3. The ratio of horizontal changes of Ls to hard tissue movements at LI(h) was 1:-0.82 in group 1 and at UI(h), LI(h) were 1:0.48, 1:0.01 in group 2. These ratios of group 1 were greater than those of group 2. 4. The direction of horizontal change of Li was the same as that of hard tissue change. The ratio of horizontal changes of Li to LI was 1:0.47 in group 1 and others showed no statistically significant difference. 5. The changes of upper lip thickness and length were -1.6mm, -1.4mm in group 1, and -1mm, -2.7mm in group 2. 6. The ratios of thickness of upper lip to ANS, UI, LI were 1:-0.83, 1:-0.37, 1:0.11 in group 1. There was similar trend in group 2, and there were no statistically significant difference. These results suggest that prediction of changes in soft tissue of upper lip, lower lip, and chin were 79%, 47%, and 63% in group 1, and 48%, 83%, and 109% in group 2. There was a tendency to decrease in thickness and increase in length of the upper lip.

  • PDF

Three dimensional cone-beam CT study of upper airway change after mandibular setback surgery for skeletal Class III malocclusion patients (Cone-beam CT를 이용한 골격성 III급 부정교합자의 하악골 후퇴술 후 상기도 변화에 관한 연구)

  • Kim, Na-Ri;Kim, Yong-Il;Park, Soo-Byung;Hwang, Dae-Seok
    • The korean journal of orthodontics
    • /
    • v.40 no.3
    • /
    • pp.145-155
    • /
    • 2010
  • Objective: Lateral cephalometric radiographs have been the main form of resource for assessing two dimensional anteroposterior airway changes. The purpose of this study was to evaluate the three dimensional volumetric change in the upper airway space in Class III malocclusion patients who underwent mandibular setback surgery. Methods: Three dimensional cone-beam computed tomographs (CBCT) and their three dimensional reconstruction images were analyzed. The samples consisted of 20 adult patients (12 males and 8 females) who were diagnosed as skeletal Class III and underwent mandibular setback surgery. CBCTs were taken at 3 stages - Baseline (1.8 weeks before surgery), T1 (2.3 months after surgery), and T2 (1 year after surgery). Pharyngeal airway was separated according to the reference planes and reconstructed into the nasopharynx, the oropharynx and the hypopharynx. Measurements at Baseline, T1, and T2 were compared between groups. Results: The result showed the volume of the pharyngeal airway decreased significantly 2.3 months after surgery (p < 0.001) and the diminished airway did not recover after 1 year post-surgery. The oropharynx was the most decreased area. Conclusions: These findings suggest that mandibular setback surgery causes both short-term and long-term decrease in the upper airway space.

Positional change in mandibular condyle in facial asymmetric patients after orthognathic surgery: cone-beam computed tomography study

  • Choi, Byung-Joon;Kim, Byung-Soo;Lim, Ji-Min;Jung, Junho;Lee, Jung-Woo;Ohe, Joo-Young
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.40
    • /
    • pp.13.1-13.8
    • /
    • 2018
  • Background: We evaluated change in the mandibular condyle after orthognathic surgery using cone-beam computed tomography (CBCT) in patients with facial asymmetry. Methods: Thirty patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry were classified into two groups according to the amount of menton deviation (MD) from the facial midline on anteroposterior (AP) cephalogram: group A (asymmetry, MD ≥ 4 mm; n = 15) and group B (symmetry, MD < 4 mm; n = 15). Position and angle of condylar heads on the axial, sagittal, and coronal views were measured within 1 month preoperatively (T0) and postoperatively (T1) and 6 months (T2) postoperatively. Results: On axial view, both groups showed inward rotation of condylar heads at T1, but at T2, the change was gradually removed and the condylar head returned to its original position. At T1, both groups showed no AP condylar head changes on sagittal view, although downward movement of the condylar heads occurred. Then, at T2, the condylar heads tended to return to their original position. The change in distance between the two condylar heads showed that they had moved outward in both groups, causing an increase in the width between the two heads postoperatively. Analysis of all three-dimensional changes of the condylar head positions demonstrated statistically significant changes in the three different CBCT views in group B and no statistically significant changes in group A. Conclusions: There was no significant difference between the two groups in condylar head position. Because sagittal split ramus osteotomy can be performed without significant change in symmetrical and asymmetrical cases, it can be regarded as an effective method to stabilize the condylar head position in patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry.

Comparison of treatment effects between four premolar extraction and total arch distalization using the modified C-palatal plate

  • Jo, Sung Youn;Bayome, Mohamed;Park, Justyn;Lim, Hee Jin;Kook, Yoon-Ah;Han, Seong Ho
    • The korean journal of orthodontics
    • /
    • v.48 no.4
    • /
    • pp.224-235
    • /
    • 2018
  • Objective: The purpose of this study was to compare the skeletal, dental, and soft-tissue treatment effects of nonextraction therapy using the modified C-palatal plate (MCPP) to those of premolar extraction (PE) treatment in adult patients with Class II malocclusion. Methods: Pretreatment and posttreatment lateral cephalographs of 40 adult patients with Class II malocclusion were retrospectively analyzed. The MCPP group comprised 20 patients treated with total arch distalization of the maxillary arch while the PE group comprised 20 patients treated with four PE. Fifty-eight linear and angular measurements were analyzed to assess the changes before and after treatment. Descriptive statistics, paired t-test, and multivariate analysis of variance were performed to evaluate the treatment effects within and between the two groups. Results: The MCPP group presented 3.4 mm of retraction, 1.0 mm of extrusion, and $7.3^{\circ}$ lingual inclination of the maxillary central incisor. In comparison, the PE group displayed greater amount of maxillary central incisor retraction and retroclination, mandibular incisor retraction, and upper lip retraction (5.3 mm, $14.8^{\circ}$, 5.1 mm, and 2.0 mm, respectively; p < 0.001 for all). In addition, the MCPP group showed 4.0 mm of distalization and 1.3 mm of intrusion with $2.9^{\circ}$ distal tipping of the maxillary first molars. Conclusions: These findings suggest the MCPP is an effective distalization appliance in the maxillary arch. The amount of incisor retraction, however, was significantly higher in the PE group. Therefore, four PE may be recommended when greater improvement of incisor position and soft-tissue profile is required.

RADIX AUGMENTATION USING TEMPORALIS FASCIA GRAFT (측두근막 이식을 이용한 비근증대술)

  • Ryu, Sun-Youl;Ryu, Jae-Young;Kim, Hyun-Syeob
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.29 no.2
    • /
    • pp.167-173
    • /
    • 2007
  • The temporalis fascia graft has been widely used in the correction of nasal deformities. The fascia can be used alone or combined for augmentation rhinoplasty. The fascia graft provides adequate coverage, contour, and bulk on the profile of the nose, as well as an inconspicuous donor site. A depressed radix area can be successfully corrected by the fascia graft. We present two cases of nasal radix augmentation by using temporalis fascia graft. Two male patients presented with the skeletal class III malocclusion and the depressed radix. A planned orthognathic surgery and the temporalis fascia graft to the radix were performed. The malocclusion and the profile of the patients were markedly improved after the operation. Not only the radix but also the nose was improved in its size and length. There was no noticeable resorption or displacement of the radix area at follow-up. The temporalis fascia graft could be an appropriate surgical technique in radix augmentation and nose lengthening.

Three-dimensional cone beam computed tomography analysis of temporomandibular joint response to the Twin-block functional appliance

  • Jiang, Yuan-yuan;Sun, Lian;Wang, Hua;Zhao, Chun-yang;Zhang, Wei-Bing
    • The korean journal of orthodontics
    • /
    • v.50 no.2
    • /
    • pp.86-97
    • /
    • 2020
  • Objective: To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment. Methods: Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption. Results: Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG. Conclusions: We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.

Unilateral maxillary central incisor root resorption after orthodontic treatment for Angle Class II, division 1 malocclusion with significant maxillary midline deviation: A possible correlation with root proximity to the incisive canal

  • Imamura, Toshihiro;Uesugi, Shunsuke;Ono, Takashi
    • The korean journal of orthodontics
    • /
    • v.50 no.3
    • /
    • pp.216-226
    • /
    • 2020
  • Root resorption can be caused by several factors, including contact with the cortical bone. Here we report a case involving a 21-year-old female with Angle Class II, division 1 malocclusion who exhibited significant root resorption in the maxillary right central incisor after orthodontic treatment. The patient presented with significant left-sided deviation of the maxillary incisors due to lingual dislocation of the left lateral incisor and a Class II molar relationship. Cephalometric analysis demonstrated a Class I skeletal relationship (A point-nasion-B point, 2.5°) and proclined maxillary anterior teeth (upper incisor to sella-nasion plane angle, 113.4°). The primary treatment objectives were the achievement of stable occlusion with midline agreement between the maxillary and mandibular dentitions and appropriate maxillary anterior tooth axes and molar relationship. A panoramic radiograph obtained after active treatment showed significant root resorption in the maxillary right central incisor; therefore, we performed cone-beam computed tomography, which confirmed root resorption along the cortical bone around the incisive canal. The findings from this case, where different degrees of root resorption were observed despite comparable degrees of orthodontic movement in the bilateral maxillary central incisors, suggest that the incisive canal could be an inducing factor for root resorption. However, further investigation is necessary to confirm this assumption.

Changes in atlas position with Class ll activator treatment in Class II malocclusion patients (II급 부정교합자에서 액티베이터 사용에 따른 atlas의 위치 변화에 관한 연구)

  • Cho, Moon-Ki;Cha, Kyung-Suk;Chung, Dong-Hwa;Lee, Jin-Woo
    • The korean journal of orthodontics
    • /
    • v.37 no.1 s.120
    • /
    • pp.44-55
    • /
    • 2007
  • Objective: Previous studies have reported that morphological features of the first cervical vertebra (atlas) have been associated with mandibular growth direction. The purpose of this study was to show the possible positional and morphological changes of the Atlas from activator treatment in Class II malocclusion patients. Methods: Lateral cephalometric radiograph tracings were made at initial, middle and final stages of treatment. Angular and linear measurements of skeletal and morphological features were measured on the anatomical landmarks and reference planes. Results: The skeletal effects of activator treatment on Class II malocclusion patients were evident on ramal height, body length, effective body length, ANB, and overjet. Clockwise rotation of the long axis of the Atlas was found in Group 1, but there was no inclination change of the Atlas in groups 2 and 3. There was no significant correlation between anterior and posterior positions of the atlas or morphological change in all groups. - except for posterior movements of the Atlas found in group 1. Conclusion: Clockwise rotation of the atlas axis resulted from activator treatment in Cl II malocclusion patients. Change in atlas axis can be thought of as an indicator for success of activator treatment.

A Study on Basal and Dental Arch Width in Skeletal Class III Malocclusion (골격성 III급 부정교합자의 치열궁 폭경에 관한 연구)

  • Lee, Hae-Kyung;Son, Woo-Sung
    • The korean journal of orthodontics
    • /
    • v.32 no.2 s.91
    • /
    • pp.117-127
    • /
    • 2002
  • The purpose of this study was to compare the arch width of the hyperdivergent group with that of the neutral group in Class III malocclusion based on the vertical patterns and to compare the arch width of Class III neutral group With that of normal occlusion group based on sagittal patterns. The subjects consisted of 118 pairs of studty casts, divided into three groups , 37 Class III hyperdivergent group(18 males and 19 females, SN-Mn plane angle>39.5$^{\circ}$), 40 Class III neutral group(20 males and 20 females, SN-Mn plane angle : 32 ${\pm}$ 2.5$^{\circ}$) and 41 Class I normal occlusion group(20 males and 21 females). The intercanine, interpremolar, and intermolar width of the maxillary and mandibular study casts were measured, then the ratios of dental width to basal width and mandibular width to maxillary width were obtained. Basal arch width and dental arch width were measured to obtain the pure basal arch relation in transverse plane as ruled out the transverse dental compensation. The results were as follows 1. There were no significant differences in any ratios between Class III hyperdivergent group and Class III neutral group as different vertical pattern. 2. As the ratios of dental arch width to basal arch width between normal occlusion group and Class III neutral group were compared, the maxillary teeth flared buccally to the basal bone, and the mandibular teeth tilted lingually to the basal bone in Class III neutral group. 3. The ratios of mandibular arch width to maxillary arch width in basal arch level were significantly different in all regions. Maxillary basal arch width of Class III neutral group was narrower than that of normal occlusion group. 4. The ratios of mandibular arch width to maxillary arch width in teeth level were not significantly different between normal occlusion group and Class III neutral group. In spite of discrepancies of maxillary and mandibular basal arch width, the dental arch width of Class III malocclusion group compensated very well. At the presurgical orthodontic treatment in clinic, it would not be desirable to decompensate for compensated dental arch width too much, for obtaining an appropriate arch compatibility and good results for orthognathic surgery.

A CROSS-SECTIONAL LONGITUDINAL CEPHALOMETRIC STUDY ON CRANIOFACIAL SKELETAL CHARACTERISTICS IN KOREAN CHILDREN AGED 6 TO 14 WITH CLASS III MALOCCLUSIONS (III급 부정교합을 지닌 $6\sim14$세 아동의 중두개저각에 따른 안면두개골의 형태적 특징: 측두방사선규격사진을 이용한 횡단누년적 연구)

  • Park, Soo-Bae;Choi, Yeong-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.27 no.1
    • /
    • pp.135-145
    • /
    • 2000
  • It is well known that there are different craniofacial skeletal groups in the same malocclusion types. The present study was performed to determine morphologic sub-groups in Korean children with Class III malocclusions, and to find out morphological differences between subgroups by means of a cross-sectional longitudinal cephalometric study. In this study, 135 children aged 6 to 14 year-old with untreated Class III malocclusions were selected. The samples were divided into two groups depending on the angulation of middle cranial fossa (MCF). That is, when the MCF of an individual was measured smaller than 40.3, he/she was tossed into mandibular protrusive-effect group(MREG), while when an individual was measured larger than 40.3, he/she was tossed into mandibular retrusive-effect group(MREG). Thereafter, the grouped samples were divided into 4 age groups(7, 9, 11 and 13 year-old). Thirty four linear and angular measurements on the tracings of lateral cephaloradiographs were measured, and the morphological characteristics and differences were compared and analysed by means of Wilcoxon test. It was found that Korean children with Class III malocclusions were divided into two groups, in which 39.3% were belonged in the MREG and 60.7% were in the MREG. In the MREG, anterior-posterior length of cranial base, nasomaxillary complex, maxilla and mandible were larger than the MREG. And although there was no difference in the total length of mandible (Co-Gn), mandibular body length (Go-Gn) was larger in the MREG during the majority of the observed periods. These results would suggest that a majority of the samples, 60.7%, demonstrated many of configurations of craniofacial skeletal relationships that can be found in the leptoprosopic faceform.

  • PDF