• 펄프종이기술
• /
• 제44권5호
• /
• pp.54-62
• /
• 2012

The main role of surface sizing of linerboard is to improve surface and strength properties. Since surface sizing solution is applied on once dried web, substantial amount of drying energy is required. Saving of the drying energy associated with surface sizing can be made by increasing the solids content of the starch solution in size press. Therefore, it is highly desirable to develop low viscosity starches for surface sizing. A low viscosity oxidized starch was prepared and compared its effect of surface sizing with a conventional oxidised starch. Results showed increase in solids content of the starch solution decreased evaporation energy and drying time. Low viscosity starch penetrated deeper into paper and this improve various mechanical properties of linerboard.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.1-7
• /
• 2000

Alkaline Sizing behavior and mechanism of handsheets, which were prepared from thermomechanical pulp (TMP) with alkylketene dimer (AKD), were studied in terms of the conditions of the handsheet-making. AKD content in the TMP handsheets was increased with increasing of AKD addition level and the addition of a polyamideamine-epichlorohydrin resin (PAE) clearly enhanced AKD retention as well as the resultant sizing performance of TMP handsheets. Although drying of the AKD sized TMP webs at $20^{\circ}C$ led to no or quite low sizing level, but TMP handsheets sized with AKD had higher sizing degrees with increasing of the temperature of heat treatment. Scanning electron microscopic observations of the AKD-sized TMP handsheets showed that AKD emulsion particles were present on pulp fiber surfaces independently without coagulation in the TMP handsheets dried at $20^{\circ}C$. Heat treatment of the AKD-sized handsheets resulted in disappearance of the AKD emulsion particles because of their melting and spreading. The addition of calcium carbonate filler to the TMP suspensions did not influence on AKD content in the TMP handsheets. Nevertheless, their sizing degrees clearly increased by the addition of $CaCO_3$filler. Probably, AKD molecules adsorbed on the $CaCO_3$filler particles contribute to the enhancement of sizing performance. Thus, AKD can give sizing features effectively to the TMP handsheets, when they are made under suitable conditions.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.148-151
• /
• 2001

The effect of main chain structure of anion-containing copolyesters on the properties of copolyester sizing agents was investigated. The copolyesters were prepared by conventional two step polymerization technique from DMT, DMI, DMS, EG, and DEG. The copolyesters synthesized were characterized by atomic absorption spectroscopy, $^1$H-NMR Spectroscopy, GC, FTIR Spectroscopy, and DSC. The solubility decreased as the DMT content increased. The copolyesters having DMT:DMI = 1:1 showed the minimum viscosity. The effect of EG content on the solution stability was not clear and the samples having high DMI content showed better solution stability. The water resistance was best when only DMI and EG were used, while it was worst when DMT:DMI was 1:0.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.391-394
• /
• 2006

Studied that the relationship between the charge density of PAC and its alkalinity, as well as the influences of PAC in paper sizing. Study results showed that PAC with higher charge density brought higher sizing degree when the same amount of $Al_{2}O_{3}$ content was dosed. However, there was no direct relationship between PAC charge density and its alkalinity, and higher PAC alkalinity can't improve its charge density. It was also found that the admixture (PPAC) of polyamine and PAC had higher charge density than PAC. The effects of PPAC on DRS and RAKD sizing were better than PAC sizing, when dosage and other sizing condition were the same.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.737-748
• /
• 1998

This study was carried out on 132 obese women who satisfied both of conditions for obesity: equal to or over 1.6 in Rohrer index and 90 in bust girth. The purpose of the study was to set up a sizing system using the loss function which would be a guide for obese women to select ready-to-wear of suitable size. The results were as follows. 1) In the sizing system for large size apparel industry, each company has 4 to 7 sizes that differ in their content and number. Producing only 5 sizes was trying to minimize the producti on expenses. 2) The sizing system according to the loss function was the follwings. The height was 3: 149, 154.5 and 161 cm. The bust girth was 5:96.5, 100.5, 104, 107.5, 112 cm. The hip girth was 5: 95, 99, 102.5, 105.5, 110 cm. 3) In comparing the cover ratio of the newly suggested sizing system for obese women's garment with that of the Korea Sizing system for women's garment, the former was founded to have the greater cover ratio.

• 대한가정학회지
• /
• 제23권1호
• /
• pp.11-17
• /
• 1985

This paper aims to examine the variety of the absorption of cotton, T/C and hemp fabrics seperately seperaterly sized by rice, wheat, potato, corn flour and pp.V.A.. Experimental variables occurring in the concentration of sizing agents, the water content of unsized fabrics and an iron temperature show the following results, 1. When fabrics sized, the rate of absorption increases according to the order of rice, corn, pp.V.A., potato, wheat flour for cotton fabrics, of rice, corn, pp.V.A., wheat, potato flour for hemp fabrics and of the rice, pp.V.A., potato, corn, wheat flour for T/C fabrics : rice flour shows an absorption rate highest among all the others mentioned above. 2. To a certain extent, the stronger the concentration of sizing agents, the higher the rate of absorption. 3. The higher fabrics density, the higher absorption rate. 4. The structure and hydrophilic property of the sized fabrics affect the rate of absorption. 5. The fabrics with water content of 20% before sizing it shows the rate of absorption highest. 6. An iron temperature after sizing fabrics shows the rate of absorption highest at the properest at the properest one : $180^{\circ}C$ for cotton, $150^{\circ}C$ for T/C and $200^{\circ}C$ for hemp fabrics.

• 펄프종이기술
• /
• 제46권2호
• /
• pp.1-7
• /
• 2014

Causticizing calcium carbonate (CCC) is produced as a by-product in the causticization step of the kraft pulping process. It is often calcined in a rotary lime kiln after being dewatered and reused in the causticizing process. But for the China mill, the conventional recycled way is difficult because the CCC is mainly obtained from non-wood pulping materials, which higher silicon content led to serious silicon obstacle. So it is often discarded as solid waste or used in landfill after dewatering and secondary pollution is brought. In order to prevent its secondary pollution, recent years, the CCC is used as a filler in China papermaking industry. In mill trials, the CCC can be used to replace an amount of precipitated calcium carbonate (PCC). Unfortunately, the application scope and dosage of CCC have been limited due to its lower sizing efficiency than PCC. In this study, the reason for the lower sizing efficiency of alkyl ketene dimer (AKD) when CCC was used as a filler was investigated. The results showed that the materials in green liquid, such as insoluble matter in green liquid, silicon and metal ions, were a little influence on the sizing efficiency of AKD. The higher BET and BJH pore volume of the CCC were the main reason for lower sizing efficiency of AKD when it was used as filler.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.9-15
• /
• 2013

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.50-55
• /
• 2014

An oxidized starch was modified for surface sizing via etherification and esterification. Propylene oxide (PO), sodium monochloroacetate (SMCA), and acrylonitrile (AN) were used as etherification, and vinyl acetate monomer (VAM), maleic anhydride (MA), fumaric acid (FA), and itaconic acid (ITA) were used for esterification. Esterification and etherification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14 to 16%. Surface sizing performance of starches in tensile strength, stiffness and compressive strength was improved by esterification and etherification of the oxidized starch. Especially, SMCA etherification was found to be the most effective modification method.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.453-462
• /
• 2003

The pantyhose is a close-fitting garment, and consumers are highly sensitive to any progress made in fitting the garment to their lower body and increasing comfort. However, the pantyhose manufactured in Korea are only one-sized. The purpose of this study is to suggest a sizing system for pantyhose. The results of this study are as follows: 1. As a results of questions regarding the sizing system of pantyhose, 88.2% of people who responded to our questionnaire preferred multi-sized pantyhose. In particular, larger women opposed to thin women expressed some dissatisfaction in the length and the width of the pantyhose. In addition, most of women preferred an indication of the sizing system and the body size of the control dimension (body mass and height). 2. The 13 species of pantyhose that were manufactured abroad are of all sizes, and only one type of pantyhose is one-sized. However, most domestic pantyhose except one, are one-sized. 3. As a result of the experiment, the spandex content in pantyhose was approximately 12∼18%. Moreover, the elongation rate was approximately 200-370%, which differed according to the features of the material. The stretch size of the pantyhose had varies greatly, add has not yet been standardized. 4. The methods for indicating the pantyhose size in this study are the square method and the stair method. The characteristics of the square method are simple, but the coverage is relatively low. The characteristic of the stair method are so complicated that older women have a low preference for this method. However, the coverage rate is high.