• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.3
• /
• pp.118-125
• /
• 2013

This paper deals with the picking batch size which a bi-directional carousel system can be feasible. The items that customers order are retrieved from the bins of carousel with batch size. The mathematical equations representing rotary travel distance and retrieval lead time to pick a given batch size are derived. Rotary travel distance represents the distance which carousel system rotates to retrieve items in a batch. The bi-directional carousel system rotates to minimize the travel distance in retrieving the items in a batch. Rotary travel distance and retrieval lead time are analyzed for the batch size through the simulation approach. From the simulation, the retrieval batch size that carousel system can be feasible is obtained. A numerical example is shown to explain the solution procedure.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.509-521
• /
• 2021

In this paper, from a review of the size distribution of the bubbles during pool scrubbing obtained from experiments by EPRI, we apply the bubble size distributions to analyses on the decontamination factors of pool scrubbing via I-COSTA (In-Containment Source Term Analysis). We perform sensitivity studies of the bubble size on the various mechanisms of deposition of aerosol particles in pool scrubbing. We also perform sensitivity studies on the size distributions of the bubbles depending on the diameters at the nozzle exit, the molecular weights of non-condensable gases in the carrier gases, and the steam fractions of the carrier gases. We then perform analyses of LACE-ESPANA experiments and compare the numerical ~ results to those from SPARC-90 and experimental results in order to show the effect of the bubble size distributions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.1
• /
• pp.7-12
• /
• 1997

This study was intended to investigate the proper shape and size of calcium carbonate for the improvement of paper properties and its end use performance. We loaded calcium carbonate of various shapes and size in the handsheet and measured their physical and optical properties. Results obtained from the study are summarized as follows : 1. Due to different particle shapes and sizes, precipitated calcium carbonate (PCC) contributed greater to bulk improvement than ground calcium carbonate (GCC). Scalenohedral form of PCC produced the bulkiest sheet, GCC made the sheet bulkier as average particle size increases. 2. Tensile strength increased as average particle size was increasing. GCC kept tensile strength more effectively than PCC. The effect of particle size on tensile strength was much more pronounced as filler addition level was increasing. 3. Over the average particle size of 6.99$\mu$m, GCC gave much higher burst strength and internal bond than PCC did. In the filler levels of 20% and 30%, GCC by using bigger size fillers showed 50~100% improvement in some cases than PCC at the same filler content. 4. Tear strength increased as average particle size was increasing. At the filler level of 30%, PCC decreased tear greatly. 5. Over the average particle size of 13.56$\mu$m, GCC kept bending stiffness greater than PCC. Due to its shape, Scalenohedral form of PCC showed higher stiffness than others at the same particle size. 6. Cubic and acicular form of PCC improved light scattering coefficient very effectively. Light scattering coefficient of GCC decreased as average particle size increased. 7. Both of particle shape and size of filler were important factor in developing optical properties and bending stiffness. Particle size was the only important factor in developing other strength properties

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.1
• /
• pp.55-62
• /
• 2016

The least-mean fourth (LMF) algorithm is well known for its fast convergence and low steady-state error especially in non-Gaussian noise environments. Recently, there has been increasing interest in the least mean square (LMS) algorithms with variable step size. It is because the variable step-size LMS algorithms have shown to outperform the conventional fixed step-size LMS in the various situations. In this paper, a variable step-size LMF algorithm is proposed, which adopts an algebraic optimal step size as a variable step size. It is expected that the proposed algorithm also outperforms the conventional fixed step-size LMF. The superiority of the proposed algorithm is confirmed by the simulations in the time invariant and time variant channels.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.6
• /
• pp.923-934
• /
• 2021

Most apparel products have national standards for sizing; however, for gloves, national sizing standards have not yet been established. This study aims to analyze children's hand dimensions and propose a size specification for children's gloves that shows children's hand-related size information. Among the 3D measurements of sixth Size Korea Project, the measurement data of 19 dimensions related to the hands of 1,057 boys and girls aged 7-13 years old were analyzed. The distribution and growth trend of hand measurements for boys and girls demonstrated considerable mean differences and distribution trends by gender and age as per hand dimensions, which leads to the conclusion that it is necessary to show these results in the children's glove design. Based on these results, the cross-distribution maps of children's hand length and hand circumference were drafted; furthermore, the distribution relationship with an adult hand size was identified. Based on the distribution of hand sizes, the distribution of adult hand sizes overlapped with children's hand sizes was verified, and children's glove size specifications were presented. The results can be used as useful data such as measures for setting the size range and sizing system for children's gloves.

• The Korean Journal of Malacology
• /
• v.20 no.1
• /
• pp.35-43
• /
• 2004

To know the effects on temperature and body size on the clearance rate (CR) of a small tidal flat bivalve, Coecella chinensis, laboratory experiments were performed with 20 individuals of different sizes (ranging from 7 to 25 mm) at 3 different temperatures (10, 15, $20^{\circ}C$). The relationship between body size and CR was determined by an allometric equation. The CR of C. chinensis varied greatly ranging from 0.003 to 0.103 L/individual/hr. Both temperature and body size affected significantly on the CR of C. chinensis. The CR at $20^{\circ}C$was 1.5 times higher than that at $15^{\circ}C$ and 2.8 times than $10^{\circ}C$. The temperature coefficient ($Q_10$) between 10 and $15^{\circ}C$ was higher than that between 15 and $20^{\circ}C$, which indicates that C. chinensis changes its CR more rapidly in lower temperature range. As body size increased, the CR increased more than 10-fold at all temperatures. The CR relative to flesh dry weight (FDW) were fitted well to the power function: CR = a ${\times}$ $(FDW)^b$. The exponent value (b) of the fitted equation ranged from 0.64 to 0.70, which are similar to those of other bivalves. The weight-specific CR ($CR_w$) was still affected by body size (p < 0.05). This implies that smaller individuals require more energy per unit biomass for growth, and the energy requirement for growth decreases as body size increases.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.157-164
• /
• 2023

The purpose of this study is to compare and analyze bust point information presented in literature and the 8th Korean Anthropometric Survey (Size Korea 2021) as a basis for pattern making for Korean adult women. Therefore, the the bust point position was analyzed through the length from the side neckline to the bust point and the horizontal length from the bust point to the chest. The results are as follows. First, Size Korea's population shows an increase in bust circumference and Side Neck Point to Bust Point with age, with the largest Bust-Point Breadth in the 30s, followed by the 20s, 40s, 60s, and 50s. Second, the Bust-Point Breadth in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created from the bust circumference measurements of Size Korea's population, was wider than the measurements, and the difference was verified as a highly significant. Third, in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee created with the bust circumference dimensions of Size Korea's population, the length of Neck Point to Bust Point was shorter than the measured value, and the difference was highly significant. Fourth, the Bust-Point Breadth and Neck Point to Bust Point in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created with the bust circumference of the population of Size Korea by age, were analyzed in different age groups and showed significant differences from the measurements of Size Korea.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.347-349
• /
• 2008

The primitive of Identity-Based Broadcast Encryption allows a sender to distribute session keys or messages for a dynamically changing set of receivers using the receiver's identity as a public key. We already know that the trade-off exists the efficiency between the public parameter size and the ciphertext size. So, if the ciphertext size is O(1), then the public parameter size may be O(n). Some of IBBE scheme take the public parameters as input in decryption phase. Thus, a decryption device (or client) has to store the public parameters or receive it. This means that a decryption device (or client) has to have the proper size storage. Recently, delerabl$\square$e proposed an IBBE which have the O(1) size ciphertexts and the O(n) size public parameters. In this paper, we present an IBBE scheme. In our construction the ciphertext size and the public parameter size are sub-linear in the total number of receivers, and the private key size is constant.

• The Korean Journal of Ecology
• /
• v.21 no.4
• /
• pp.401-403
• /
• 1998

Body size of the Russet Sparrow (Passer rutilans) was investigated during the breeding seasons of 1994 to 1996, in south-eastern Hokkaido, Japan. Both male and female arrived slightly earlier in isolated forests than in shelter belts during the study. Wing lengths of males and females were significantly longer in isolated forests than those in shelter belts, but the other body size characteristics were not differ significantly. The results indicate habitat selection of the birds depended on their body constructions, in which wing length as an indicator, body size may be an important factor. Large-sized birds select the better quality habitat than birds of small size.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.41-50
• /
• 2021

In this study, the flow path width (Gap Size), which is the flow path of fluid, was selected differently among various factors that determine the Ccontrol Force of MR damper, and the change of Control Force was confirmed accordingly. For this purpose, two MR dampers with a Gap Size of 1.0mm and 1.5mm were fabricated, respectively, and dynamic load experiments were conducted according to changes in applied current and vibration conditions The experimental results showed that the minimum Control Force was 3.2 times higher than 1.5mm in the case of 1.0mm Gap Size, and the maximum Control Force was 2.3 times higher than 1.5mm in the case of 1.0mm Gap Size. In addition, the increased width of the Control Force according to applied current was 34N for Gap Size 1.0mm, and 12.7N for Gap Size 1.5mm. As the gap Size increased, the overall Control Force and the increase in the Control Force by the applied current decreased. Next, the dynamic range, which is a performance evaluation index of the semi-active Control device, was 2.3 on average under 1.0mm condition and 2.8 on average under 1.5mm condition, confirming the possibility of utilization as a semi-active Control device.