• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.2
• /
• pp.76-90
• /
• 2018

To determine the distribution of mercury (Hg) in the coastal surface sediments around the Korean peninsula, the baseline concentration of Hg was estimated, the extent of contamination was assessed, and the factors controlling the distribution were discussed. The concentrations of Hg in surface sediments were significantly high in Jinhae-Masan Bay in the South Sea, Ulsan-Onsan Bay and Yeongil Bay in the East Sea, but Hg in other sediments showed a similar distribution to Cs and relatively very low concentration between 0.21 and $39.5{\mu}g/kg$ ($13.6{\pm}7.80{\mu}g/kg$). Compared to the sediment quality guidelines in Korea, 8 % of the surface sediments (n=282) analyzed in this study exceeded the values of the threshold effects level (TEL), and six sediments collected around Onsan Port were higher than the value of the probable effects level (PEL). The contamination levels of Hg were assessed by the enrichment factors using the baseline concentration (2.06Cs+1.75) based on the residual analysis from the linear regression line for Cs, and further, factors controlling the distribution of Hg were discussed by the comparison with geochemical substances depending upon the Hg enrichment level. Hg concentrations were correlated well with Cs concentration in the range of less than 1.69 of EF implying grain size control, while in the range of 1.69 and 4.03 Hg concentrations were correlated well with Fe oxyhyroxide and organic carbon contents, which indicates Hg was enriched by superior sorption capability. On the meanwhile, samples with higher EFs (4.03 to 74.9) showed fairly positive correlations with other metals (Cu, Zn, Pb) rather than geochemical substances. For samples in Youngil Bay and Ulsan-Onsan Bay (n=30), Hg concentrations were correlated only with other metals rather than geochemical substances implying simultaneous supply of metal particles from metal refineries. But samples at Gosung, Sokcho and Uljin coast were correlated well with organic carbon even though they had high EFs. In addition, samples in Jinhae-Masan Bay with high contents of S were enriched by relatively high sulfide formation.

• Korean Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.108-114
• /
• 2015

Single - and combined effects of a domestic freshwater bivalve Unio douglasiae (7.6~8.6 cm in shell length) and zooplankton Daphnia magna (1~2 mm in body size) were examined to understand whether they inhibit the growth of harmful cyanobacterial bloom (i.e. Microcystis aeruginosa) in a eutrophic lake. The experiments were triplicated with twelve glass aquaria (40 L in volume); three aquaria without mussel and zooplankton, served as a control, three zooplankton aquaria (Z, density=40 indiv. $L^{-1}$), three mussel aquaria (M, density=0.5 indiv. $L^{-1}$), and three mussel plus zooplankton aquarium (ZM, density=40 indiv.Z $L^{-1}$ plus 0.5 indiv.M/L), respectively. Algal growth inhibition (%) calculated as a difference in the concentration of chlorophyll-a (Chl-a) before and after treatment. Chl-a in all aquaria decreased with the time, while a greatest algal inhibition was seen in the ZM aquaria. After 24 hrs of incubation, Chl-a concentration at the mid-depth (ca. 15 cm) in ZM aquaria reduced by 90.8% of the control, while 63.2% and 79.8% in Z and M aquaria, respectively. Interestingly, during the same period, the surface Chl-a was diminished by 51.9% and 65.4% relative to the control in Z and ZM aquaria, while 27.4% of initial concentration decreased in M aquarium, respectively. These results suggest that 1) this domestic freshwater filter-feeding bivalve plays a significant role in the control of cyanobacterial bloom (M. aeruginosa), and 2) the combination with zooplankton and mussel has a synergistic effect to diminish them, compared to the single treatment of zooplankton and mussel.

• Journal of Animal Environmental Science
• /
• v.15 no.2
• /
• pp.171-182
• /
• 2009

Conventionally, many pig producers have utilized a continual sow managements system that the matings, farrowings and weanings are done weekly basis. But this transitional method is not able to cut the cycle of diseases and fully apply all-in/all-out system because of the continuous flow of sows and pigs. Conventional weekly management system is currently limiting in small farm to work efficiently both for workers and pigs. Therefore, pig producers have found novel management methods for applying all-in/all-out system, improving pig health, leading to better growth, lowering mortality and reducing medication costs nowadays. Moreover, all-in/all-out pig management system has known as a strategy for improving productivity in swine farm. The batch system is one of the best management methods to adopt all-in/all-out pig management system that prevent spreading diseases in pig and remove cycle of diseases. Batch farrowing system is a concept for providing a group of sows that delivery within a specific farrowing interval and inducing a large enough scale of piglets to fill the weaner facilities. There are different types of batch farrowing system with batch size and interval of farrowing when several factors at the swine farm are considered such as total number of sows, available facilities in the farm, and the efficiency of workforce. Sow managements such as farrowing, weaning and breeding, every 3 weeks rather than weekly, 2 or 5-week interval have advantages for workers and reproductive cycle of sows as well as pig flow. Because there are several pros and cons both in weekly and batch management system, various factors should be considered to apply the most suitable management system in each individual farm. To improve poor swine productivity in Korea compared to ED, batch system for sows will be an alternative choice which is able to prevent high incidence of diseases in swine farm such as PMWS, PRRS, PRDC and PED because all-in/all-out pig management can be also applied automatically by using this management system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.149-155
• /
• 2015

Tooth implant is located in oral cavity and affects neck, skull base, and facail image. These magnetic inhomogeneities are usually frequency encoding direction which cause artifacts due to change of signal strength and geometric distortion. First, to evaluate signal to noise ratio (SNR) of magnetic resonance image caused by tooth implant this study uses meat phantom which is similar to human body and is consisted with fat, muscle, and water to measure signal to noise ratio. Second, signal to noise ratio by using custom-made fixed phantom is measured, and then signal to noise ratio size of different tooth implant types is compared and analyzed. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for meat phantom were 2.76, 2.22, 1.88, and 1.57 on T1 SE, 1.88, 1.78, 1.65, and 1.79 on T2 FLAIR, 2.28, 2.25, 2.88, and 2.05 on T2 FSE, and 2.74, 1.94, 1.67, and 1.48 on T2 GRE. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for fixed water phantom were 1.2, 1.06, 1.12, and 1.22 on DWI, 1.93, 1.87, 1.93, and 2.06 T1 SE, 1.83, 1.76, 1.82, and 1.92 on T2 FLAIR, 1.85, 1.79, 7.86, and 1.97 on T2 FSE, and 1.97, 1.93, 1.99, and 2.06 on T2 GRE. By considering through the results, patients and dentists need to consider some impacts from testing many aspects although their main purpose of having tooth implants is a dental restoration. Moreover, depending on the tooth implant characteristics of individual patients this study results can be used as baseline data when choosing test protocol.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.47-56
• /
• 2009

The purpose of this study is to present an alternative improving the efficient and reasonable of the physical distribution system management is influenced by many factors. Therefore, the study depends on the documentary method and survey method to achieve the purpose of this study. The major components of a physical distribution system are refers to as elements, include warehouse·storage system, transportation system, inventory system, physical distribution information system. The factors used in this study are ① factor of product(quality·A/S·added value of product·adaption of product·technical competitive power to other enterprises), ② factor of market(market channel·kinds of customer·physical distribution share), ③ factor of warehouse·storage(warehouse design·size·direction·storage ability·warehouse quality), ④ factor of transportation(promptness·reliability·responsibility·kinds of transportation·cooperation united transportation system·national transportation network), ⑤ factor of packaging (packaging design·material·educating program·pollution degree measure program), ⑥ factor of inventory(ordinary inventory criterion·consistence for inventories record), ⑦ factor of unloaded(unloaded machine·having machine ratio), ⑧ factor of information system (physical distribution quantity analysis·usable computer part), ⑨ factor of physical distribution cost(sales ratio to product) ⑩ factor of physical distribution system(physical distribution center etc). The implication of this study can be summarized as follows: ① In firms that have not adopted a systems integrative approach, physical distribution is a fragmented and often uncoordinated set of activities spread throughout various functions with function having its own set of priorities and measurements. ② The physical distribution is recognized as more an important strategic factor than a simple cost reduction factor, ③ It can be used a strategic competition tool to enterprise.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.629-636
• /
• 1999

Gonadal development, gametogenesis, reproductive cycle, egg-diameter and composition, condition factor, and the first sexual maturity of the clam, Potamocorbula amurensis were investigated by histological observation. Samples were collected monthly from the tidal flat of Moonpo, Puan-gun, Chollabuk-do, west coast of Korea from November 1996 to October 1997. P. amurensis is dioecious and oviparous. The gonads were composed of a number of gametogenic follicles. The oogonia and fully ripe oocytes were $9\~12\mu$m and $50\~60\mu$m in diameter, respectively. Each of the spermatogenic follicle formed stratified layers composed of spermatogonia, spermatocytes spermatids, and spermatozoa in groups on the follicular wall. The reproductive cycle of P. amurensis could be classified into five successive stages: early active, late active, ripe, partially spawned, and recovery. Spawning occurred twice a year from May to July and from September to October, the main spawning seasons also appeared twice a year between May and June, and in October when the water temperatures reached above $18^{\circ}C$. The monthly changes in the condition factor were closely related with the reproductive cycle. Minimum size for the sexual maturation of female and male were 8.1 mm in shell length. There were two patterns for the gametogenesis: 1. After spawning, the undischarged ripe oocytes and spermatozoa in the follicles were degenerated and absorbed, but in part, the existing follicles were not contracted significantly and then they took part in new gametogenesis within one or two months (especially, in summer). 2. After spawning, each follicle was contracted, thereafter gametogenesis again occurred in newly formed follicles.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.3-12
• /
• 2006

The feasibility for the employment of manganese nodule as an adsorbent for $SO_{2}$ gas has been investigated. The specific surface area of manganese nodule particle, which used in the experiments, was ca. $221.5m^{2}/g$ and the content of sulfur in manganese nodule was observed to significantly increase after $SO_{2}$ was adsorbed on it. The EPMA for the distilled water-washed and methanol-washed manganese nodule particle after $SO_{2}$ adsorption showed that its sulfur content was slightly decreased to 14.7% and 13.1% respectively, from 15.4% before washing. The XRD analysis of manganese nodule showed that todorokite and birnessite, which are manganese oxides, and quartz and anorthite were the major mineralogical components and weak $MnSO_{4}$ peaks were detected after $SO_{2}$ was adsorbed on manganese nodule. For an comparative investigation, limestone was also tested as an adsorbent for $SO_{2}$, however, no peaks for $CaSO_{4}$ were found by XRD analysis after the adsorption of $SO_{2}$. As the size of adsorbent increased, time for breakthrough was decreased and the adsorbed amount of $SO_{2}$ was also diminished. The $SO_{2}$ adsorption was hindered when its flow rate became high and the adsorption capacity of manganese nodule was observed to be superior to that of limestone. In addition, the mixture of manganese nodule and limestone did not show an increase in the adsorption of $SO_{2}$. Finally, as the temperature was raised, the adsorbed amount of adsorbate on manganese nodule was found to be decreased.

• Journal of Korean Society of Forest Science
• /
• v.6 no.1
• /
• pp.27-31
• /
• 1967

The bamboo is a plant whose culm grows straight up. This growing characteristics has been widely utilized in industry and craft. But the developments of handcraft making and horticultural techniques in recent years become to demand the bent bamboo culms. This study has been conducted at the experimental grove located at Hyunnae Ri, Okkye Myun, Myungju Gun, Kangwon Do since 1960. Although it has been known that the secret for which bamboo shoots complet growth within 40 odd days lies in their rhizomes, this writer felt the bamboo culm sheath might be another factor in addition. Hence some were stripped of sheath in this bending study as the following: 1. Time of sheath stripping. 2. Direction of sheath stripped for arbitrary bending. 3. Accuracy of bending following the size (growth) of bamboo shoots. The following results were obtained: 1. Bamboo shoots begin to appear in April. But the bamboo shot up in June showed the best bending result with 68% of bending efficiency. 2. Bending of the culm was facilitated by stripping off the sheath located on the side of the direction toward which bending was desired. By doing this, the culm could be bent as much as 90 degrees. But the culm totally stripped of sheath could be bent in any direction. 3. In order to determine the accuracy of bending of bamboo shoots growing, sheath were stripped off the shoots of which height ranged from 10 centimeter to 150 centimeters. The shoots with height of 110 centimeters showed the best result with 90%.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.299-303
• /
• 2008

An Oriental lily cultivar 'Pacific Wave' was released in 2007 at National Institute of Horticultural and Herbal Science, Rural Development Administration (RDA), Suwon, Korea. The crossing was made in 1999 between Oriental lily 'Simplon', an outward-facing and white colored cultivar, and 'Spinoza', pink colored cultivar. The first selection was done in 2003 with a line of 'O-03-16'. Multiplication and bulb growth, and performance test was conducted from 2004 to 2006. This selection was later on given as 'Pacific Wave' in 2007 at NHRI. Flowering time of 'Pacific Wave' in plastics house culture is mid June and grows average 115 cm. Flowers are upward-facing with 20.1 cm in diameter and white with yellow centered (RHS W155C + Y9A). Mean petal length and width is 12.2 cm and 4.2 cm, respectively. Leaves are 12.3 cm long, 2.9 cm wide. The throat color is green. It shows gray and purple stigma, and red brown pollen. The weight and size of bulb is 82.5 g and 19.6 cm, respectively. Year-round flowering can be by storing the bulb under -1 to $-2^{\circ}C$ conditions. It is necessary to add calcium to the fertilizer or remove side scales to prevent leaf scorch. It is needed to control Botrytis disease in summer wet season.

• The Korean Journal of Malacology
• /
• v.29 no.3
• /
• pp.189-195
• /
• 2013

Experiments for net cage culture at sea were conducted in each $2.4{\times}2.4$ m in area and took the samples from four different densities: 150, 300, 450 and 600 per cross-sectional area ($m^2$) of shelter. The same stocking densities applied to indoor tank culture to investigate the growth and survival rate. The size of juvenile abalone sample was $36.14{\pm}2.28$ mm for net cage culture and $38.62{\pm}3.22$ mm or indoor tank. Feed such as raw brown sea mustard, raw kelp and dried kelp was sufficiently provided to the abalone. In net cage culture experiment, the growth of the spat of juvenile abalone was the fastest $60.53{\pm}5.75$ mm in the 150 abalone cage per square meter ($m^2$), followed by the 300 abalone cage at $54.01{\pm}5.17$ mm, 450 abalone cage at $51.48{\pm}5.37$ mm and 600 abalone cage at $51.09{\pm}4.96$ mm in order. In the meantime, in the indoor tank experiment, the 150 abalone indoor tank was the fastest $47.50{\pm}6.31$ mm per square meter, followed by the 300 abalone tank at $45.92{\pm}5.23$ mm, the 450 abalone tank at $44.24{\pm}5.59$ mm and the 600 abalone tank at $43.62{\pm}4.44$ mm in order. The survival rate was more than 97.9% in all the experiments, not showing a significant difference.