• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.4
• /
• pp.298-302
• /
• 2010

We investigated the resistance change behavior of SABiT (Samsung Advanced Bump interconnection Technology) technology-applied PCB (Printed Circuit Board) with the various bump sizes and fabrication conditions. Many testing samples with different bump size, prepreg thickness, number of print on the formation of Ag paste bump, were made. The resistance of Ag paste bump itself was calculated from the Ag paste resistivity and bump size, measured by using 4-point probe method and FE-SEM (Field Emission Scanning Electron Microscope), respectively. The contact resistance between Ag paste bump and conducting Cu line were obtained by subtracting the Cu line and bump resistances from the measured total resistance. It was found that the contact resistance drastically changed with the variation of Ag paste bump size and the contact resistance had the largest influence on total resistance. We found that the bump size and contact resistance obeyed the power law relationship. The resistance of a circuit in PCB can be estimated from this kind of relationship as the bump size and fabrication technique vary.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.464-467
• /
• 2003

In this paper, to reduce the patch size of microstrip antenna, folded surface-type patch antenna is designed and fabricated. Size reduction could be achieved because of the downed resonant frequency by the extended current path passing along below the transformated patch surface. Comparison of the patch size at the 1.575 GHz between plane type(length 82 mm${\times}$width 90 mm) and "ㄷ"-shaped folded type is carried and comparision of frequency variation at the same patch size is carried. The result is like that the patch size was reduced than the plane type by 60 mm(73.17 %) at the same frequency. Therefore, it could be checked that "ㄷ"-shaped folded type antenna is advantageous than the plane type in size reduction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.772-776
• /
• 2002

This study was made with 631 does of 3 genetic groups and 1,112 of their kids allocated into 3 different locations to examine gestation length, litter size and litter weight in goats. Attributes studied were genetic group, parity, age of dam at kidding, weight of dam at breeding, season and location. Genetic group of dam affected significantly (p<0.01) size of litter but not gestation length and weight of litter. Selected Black Bengal (SBB) genetic group performed better in litter size and litter weight than random bred Black Bengal (RBB) and its crossbreds with Jamunapari ♂ (JBB). Litter size and weight were significantly affected by age of dam at kidding (p<0.01), weight of dam at service (p<0.001) and parity (p<0001). Size and weight of litter were found highest in SBB does, or does having 35-40 months of age at kidding, or does with 19-20 kg live weight at service, or at 4th parity. Season, location and parity also affected significantly (p<0.05) gestation length. Shortest gestation length was found in 5th parity or in summer season, whereas the longest was in 2nd parity or in winter season.

• Journal of the Korean Society of Costume
• /
• v.58 no.6
• /
• pp.54-68
• /
• 2008

The purpose of this study is to investigate the effect of dot pattern size(0.8, 1.8, 2.5, 5, 8), color combination(BG/R, Y/B), area-ratio on image formation. Sets of stimulus and response scales(7 point semantic) were used as experimental materials. The stimuli were 20 color pictures manipulated with the combination of dot pattern size, color combination, and area-ratio using computer simulation. The subjects were 240 female undergraduates living in Gyeongnam-do. Image factor of the stimulus was composed of 5 different components, visibility, attractiveness, cuteness, stability and high class image. In the cuteness, color combination, dot pattern size showed independent effect. In the stability, area-ratio, dot pattern size showed independent effect. Interaction effects of color and area-ratio combination was significant on cuteness. For visibility image 8cm yellow dot/blue background, for attractiveness image BG/R coloration, for cuteness image Y/B coloration and for stability image 0.8cm yellow dot/blue background were effective. According to the variation of dot pattern size, color combination and area-ratio, it was investigated that the images for a dress wearer were expressed diversely, were shown differently in image dimensions, and could be produced to different images.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.204-209
• /
• 2001

The effects of size distribution of oil particles on the emulsion stability of mayonnaise were studied as follows; The stability of mayonnaise has concerned closely with the viscosity and the size distribution of oil particles. Mostly, if the viscosity was increased, the stability was improved, and the distribution of oil particles was uniform and the less the variation, the more the stability. 75% of oil concentration of sample showed the highest viscosity, also the size of sample was the most uniform, compared to other concentration. Mayonnaise prepared with whole egg was unstable, and the size of oil particles was double larger than the case prepared with only the yolk. Addition of xanthan gum increased, the viscosity and the stability by centrifuge so that the more stable mayonnaise could be prepared. The result of using log-normal density function by Heldmann represented that the normal size of sample adding 0.6%-soluble starch and sample N in non-adding control was increased, while those of sample adding xanthan gum and soluble starch at the same time didn't change.

• The Journal of Engineering Geology
• /
• v.8 no.1
• /
• pp.1-12
• /
• 1998

The fracture size among geometric parameters of the fracture system is treated as one of the most important factors in the geotechnical and hydrogeological analysis. However, several uncertainties in data acquisition and analysis pmcess about the fracture size are not clear yet. This study presents the current status on the estimation of the fracture size and verifies the estimating method using forward modeling approach. The factors considered are the variation of fracture intersection probabilities with different assumptions on the orientation of sampling planes and fracture size by using a simulated tleee dimensional fracture network model. If it is possible to analyze precisely the fracture intersection probabilities and the characteristics of probabilistic distnbution fiom cavern walls, outcrops or boreholes,the actual fracture size developed in rock rnass can be estimated confidently.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.268-268
• /
• 2020

토양수분량은 수문연구에 있어 중요한 인자 중의 하나이며, 그 필요성이 점차 강조되고 있다. 국내에서도 최근 새로운 관측기기의 도입이나 수자원위성의 개발 등에 관한 연구가 점차 활발하게 이뤄지고 있으나, 토양수분량 자료의 생산, 품질관리 및 배포 시스템에 관한 연구 및 개발이 부족한 실정이다. 반면에 해외에서는 International Soil Moisture Network(ISMN)을 통해 토양수분량 자료의 품질관리 및 배포가 활발하게 이루어지고 있는데, ISMN에서는 토양특성, 강우에 대한 반응, 토양온도, 시계열특성을 이용해 토양수분량 관측 자료를 품질관리 하고 있다. 본 연구에서는 ISMN의 spike 검출 알고리즘에서 그래프 평활화(smoothing)를 위해 이용되는 Savitzky-Golay 필터의 window size와 polynomial order(filter order)를 다양하게 변화시키고, 이를 설마천 관측소에서 측정한 토양수분량 원시자료에 적용하여 window size와 polynomial order별로 편의(bias), 변동(variation), 평균 제곱근 오차(Root Mean Square Error, RMSE)를 산정하였다. 통계산정 결과 원시자료와의 bias는 window size가 3이고 polynomial order가 2인 필터를 적용했을 때 가장 작은 것으로 나타났으며, variance는 window size가 3이고 polynomial order가 2인 필터를 이용했을 때가 원시자료와 가장 유사한 것으로 나타났다. 또한, RMSE는 window size가 5이고 polynomial order가 3일 때 가장 작은 것으로 나타났다. 이는 추후 토양수분량 품질관리를 수행하기 위해 적절한 필터 계수 값을 제시할 수 있는 논문으로 사료된다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.41-54
• /
• 1996

The secondary electrons developed by interaction between primary beam and a tray mounted for blocks in Megavoltage irradiation result in excess soft radiation dose to the surface layer. To reduce this electron contamination, electron filters have been used to be attached under a tray. Various filters with Cu and Al plates in six different thickness and Cu/Al combined plates in 3 different thickness were tested to measure the reduction rate of secondary electron contamination to the surface layer. The measurement to find optimal filter was performed on 6MV linear accelerator in $10 cm{\times}10 cm$ field size and fixed 78.5cm source to measurement points distance from surface to maximum build up point in 2mm intervals. The result was analyzed as the ratio of measured doses with using filters, to standard doses of measured open beam. The result of this study was fellowing : 1. The contaminated low energy radiation were mainly produced by blocking tray. 2. The surface absorbed dose was slowly increased by increasing irradiation field size but rapidly increased at field size above $15cm{\times}15cm$. 3. Al plate upto 2.5mm thickness used as a filter was found to be inadequate due to the failure of reduction of the surface absorbed dose below doses of the under surface upto the maximal build up. Cu 0.5mm plate and Cu 0.28mm/A1 1.5mm compound plate were found to be optimal filters. 4. By using these 2 filters, the absorbed dose to the surface were effectively reduced $5.5\%$ in field size $4cm{\times}4cm,\;11.3\%$ in field size $10cm{\times}10cm,\;22.3\%$ in field size $25cm{\times}25cm$. 5. In field size $10cm{\times}10cm$, the absorbed dose to the surface of irradiation was reduced by setting TSD 20cm at least,. but effective and enough dose reduction could be achieved by setting TSD 30cm as 2 optimal filters used. 6. More surface dose absorbed at TSD less than 7.4cm with a tray and filters together indicated that soft radiation was also developed by filters. 7. The variation of PDD by the different size of irradiation field was minimal as 2 optimal filters used. There was also not different in variation of PDD according to using any of two different filters. 8. PDD was not effected either by various TSD or by using the different filter among two.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.4 s.48
• /
• pp.543-548
• /
• 2004

For pearl pigments used for splendor or gloss effect of make-up products, especiallv point make-up products like eye-shadow and blusher, we studied the variation of particle size distribution by the grinding time and by the binder used as a binding agent. In this study. high speed mixer was used and the particle sire distribution was measured by using the light scattering method. In case of pearl pigments, its median diameter of $5{\;}{\mu}m$, the particle size was reduced to 4.6 um when it was ground for 120 s. When it was applied for the pearl pigment of $45{\;}{\mu}m$, the particle size was reduced to $27{\;}{\mu}m$. We confirmed that the latter was reduced more largely and the original gloss was reduced too. For the binder, we studied the correlation between particle size of raw material and grinding time. We also investigated the effects of the binder contents on the variation of particle size distribution of products by aggregation of particles.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.304-309
• /
• 2012

Size verification of small and large bubbles in a bubble column was investigated by employing the dynamic gas disengagement (DGD) method and dual electrical resistivity probe (DRP) method, simultancously. The holdups of large and small bubbles in the bubble column in a given operating condition were obtained by means of the DGD method by measuring the pressure drop variation in the column with a variation of time after stopping the gas input into the column. The size and frequency of bubbles were measured by the DRP method in the same operating condition, from which the bubble holdup of each range of size was obtained. The verification of size in determining the large or small bubbles was decided by comparing the holdups of large or small bubbles measured by the DGD method with that measured by the DRP method. Filtered compressed air and tap water were used as a gas and a continuous liquid medium. The diameter and height of the bubble column were 0.102 m and 1.5 m, respectively. The demarcation size between the large and the small bubbles in the bubble column was 4.0~5.0 mm; the demarcation size was about 5.0 mm when the gas velocity was in the relatively low range, but about 4.0 mm when the gas velocity was in the relatively high range, within this experimental conditions.