• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.27-35
• /
• 1998

An experimental study was performed to investigate the optimum cycle of an inverter heat pump as a function of frequency. The performance of the inverter heat pump with the rated cooling capacity of 4,141 W(3,550kcal/h) was measured with a variation of frequency, indoor and outdoor temperature, and length of capillary tube in the psychrometric test room. As a base case, the inverter heat pump with the standard capillary length of l,000mm(optimum size for the frequency of 60Hz) and ASHRAE Test condition "A" was tested by varying frequency from 30Hz to 80Hz. Then, the optimum cycles were investigated by varying the length of capillary tube at each frequency level of 30, 60 and 80Hz. Based on the experimental data, the change of system characteristics between the optimum and the base case were analyzed for each selected frequency level. Generally, for low frequency level(30Hz), the longer length of the capillary tube compared with the standard size showed the higher energy efficiency ratio(EER), while for high frequency level(80Hz) the shorter length of the capillary tube showed the higher EER.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.1
• /
• pp.64-72
• /
• 1997

An experiment study was performed to investigate the optimum cycle of an inverter heat pump as a function of frequency. The performance of the inverter heat pump with the rated cooling capacity of 4141W(3550kcal/h) was measured with a variation of frequency, indoor and outdoor temperature, and length of capillary tube in the psychrometric test room. As a base case, the inverter heat pump with the standard capillary length of 1000mm which was optimum size for the frequency of 60Hz and ARHRAE Test condition A was tested by varying frequency from 30Hz to 80Hz. Then, the optimum cycle was invesigated by varying the length of capillary tube at each frequency levels of 30, 60 and 80Hz. Based on the experimental data, the change of system characteristics between the optimum and the base case were analyzed for each selected frequency levels. Generally, for low frequency level(30Hz), the longer length of the capillary tube compared with the standard size showed the higher EER, while for high frequency level(80Hz) the shorter length of the capillary tube showed the higher EER.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.206-211
• /
• 1990

Total suspended particles were collected and size-fractionated by an Andersen high-volume air sampler at Chungang University located near the Han River, Seoul, Korea, during the period form March, 1986 to August, 1986 and from March, 1987 to February, 1988. The concentrations and the particle size distributions of anions such as chloride, nitrate and sulfate were determined by ion chromatography. The averages of concentrations were $125.43\;{\mu}g/m^3$ in 1986 and $189.19\;{\mu}g/m^3$ in 1987 for total suspended particles (TSP), $2.12\;{\mu}g/m^3$ in 1986 and $4.14\;{\mu}g/m^3$ in 1987 for chloride, $4.39\;{\mu}g/m^3$ in 1986 and $5.95\;{\mu}g/m^3$ in 1987 for nitrate and $11.98\;{\mu}g/m^3$ in 1986 and $19.29\;{\mu}g/m^3$ in 1987 for sulfate. Size distribution of TSP was found to be generally bimodal. Chloride exhibited a seasonal variation in the distribution; fine particles were predominant in the winter whereas the concentration of coarse ones was almost same through four seasons. Nitrate showed a distribution similar to that of chloride. Such variation was less significant for sulfate. For chloride and nitrate, the relationship between the monthly averaged distribution pattern and air temperature was analyzed in terms of fine fraction (FF). The FF decreased with increasing air temperature.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.24-29
• /
• 2016

One of the main applications of digital image processing is the estimation of the number of certain types of objects (cells, seeds, peoples etc.) in an image. Difficulties of these counting problems depends on various factors including shape and size variation, degree of object clustering, contrast between object and background, object texture and its variation, and so on. In this paper, a new automatic colony counting algorithm is proposed. We focused on the two applications: counting the bacteria colonies on the agar plate and estimating the number of seeds from images captured by smartphone camera. To overcome the shape and size variations of the colonies, we adopted the distance transformation and peak detection approach. To estimate the reference size of the colony robustly, we also used k-means clustering algorithm. Experimental results show that our method works well in real world applications.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.159-163
• /
• 2002

So far, many kinds of researches on the chip components and MCM-C RF module especially on the 3-dimensional ceramic module using embedded passives have been performed. LTCC system has many kinds of advantages, like low loss, low cost of process, stability of process etc..The electrical behaviors of components are affected by that of the material systems including dielectrics and conductors. In this study, many kinds of conductor pastes in the variation with metal content and grain size are fabricated and their effect on the characteristics of stripline resonator are examined upto 6 ㎓.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.85-107
• /
• 1993

The cosmetic fine powders were mixed with variation of mixing time(5) in the mixers (ribbon mixer, powder mixer, micropulverizer and fine impact mill). The powders were nixed with small amount of ferric oxide. as tracer. The mixed powders ere measured the particle size distribution, specific surface area and surface color with mixing time (s). The color variation, particle size distribution and specific surface area of the mixed powder exist a relationship with mining time(s) that can be expressed as mathematical equations to show the degree of the mixing of the powder mixture. The linear velocity of the impellar tip is the main factor contributing to he mixing efficiency of the mixers un this study. According to the linear velocity, he mixers used are devieded as convection mixing (ribbon mixer), sclera mixing powder mixer) and diffusion mixing (micropulverizer/fine impact mill).

• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.119-124
• /
• 2008

To increase pot life in the formulation mixed with bisphenol F epoxy resin, anhydride-based curing agent, and imidazole-based curing accelerator powders as a paste material for high-speed RFID chip bonding, size variation of the imidazole-based powders and a coating method of the powders were adopted in this study. In experiment with regard to the size variation, the pot life was not outstandingly increased. Through the idea using the coating method, however, the pot life was increased up to 4.25 times in comparison with the addition of initial imidazole-based powders. Consequently, successive bonding of RFID chip could be performed with very short time of 5sec using the suggested formulation having improved pot life.

• The Journal of Korean Society for Radiation Therapy
• /
• v.10 no.1
• /
• pp.97-101
• /
• 1998

In recent days, although many kinds of beam modifiers are developing and using for clinical purposes in accordance with progressing medical engineering, physical wedges are preferred to use as a beam modifier by a lot of institutions until now because of cost, complexities of dosimetry and mechanical uncertainties. According to progressing technology, available field size of wedge is more enlarger than that of old model LINAC. Because field size dependence of wedged fields increases in new model LINAC, we was trying to know that how much different PSFs are in enlarged wedged fields compared with open fields. In small or middle size of fields($4{\times}4{\sim}15{\times}15cm$), there are only a few percents of PSF variation between open and wedged fields. But there are $2{\sim}8\%\;variations\;in\;relatively\;large\;fields(20{\times}20{\sim}30{\times}40cm)$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.108-114
• /
• 2018

In this study, the thermal and rheological characteristics of a 10 wt.% addition of aluminum particles and the effect of the particle size were investigated to qualitatively analyze the paraffin fuel entrainment regression rate. The results revealed that the addition of aluminum particles and their relative particle size affected the rheological characteristics, rather than the thermal characteristics. Moreover, it was found that the variation of thermal properties had a minor effect on the entrainment regression rate, in comparison to the variation in rheological properties.

• 한국데이터정보과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.17-23
• /
• 2004

At the conclusion from the hypothesis testing, there is a possibility of making Type I error and Type II error. The purpose of this article is to use this program in statistics teaching through developing the program for studying on the concept about these two errors, two kinds of the probability of errors by the variation of rejection region, two kinds of the probability of errors by the variation of sample size, the relations of the probability $\alpha$ and $\beta$ by these two errors, and power function, power curve.