• 제목/요약/키워드: Size selectivity

검색결과 293건 처리시간 0.031초

삼중자망에 채집된 동해 흥해 연안어류의 종조성 (Species Composition of Fish Collected by Trammel Net off Heunghae, Korea)

  • 황선도;박영조;최수하;이태원
    • 한국수산과학회지
    • /
    • 제30권1호
    • /
    • pp.105-113
    • /
    • 1997
  • 흥해 연안에서 1989년 5월에서 1990년 10월 사이 삼중자망으로 어류를 채집하여 채집시기에 따른 종조성을 파악하고, 우점종의 체장 분석을 통하여 망목에 따른 어종별 체장 선택성을 분석하였다. 총 28종의 어류가 채집되었으며, 개체수와 생물량은 뚜렷한 계절 변화를 보이지 않았다. 겨울에서 여름 사이에는 주거종인 볼락, 노래미 및 쥐노래미가 우점하였고, 가을에는 회유종인 쥐치와 말쥐치가 우점하였으며 주거종의 수는 감소하였다. 자망 100m 당 12시간 평균 어획량은 11마리, 1,938 g이었으며, 채집된 주어종들은 3세 이상의 체장 20cm 이상의 개체가 주를 이루었다.

  • PDF

Gas Permeation of SiC Membrane Coated on Multilayer γ-Al2O3 with a Graded Structure for H2 Separation

  • Yoon, Mi-Young;Kim, Eun-Yi;Kim, Young-Hee;Whang, Chin-Myung
    • 한국재료학회지
    • /
    • 제20권9호
    • /
    • pp.451-456
    • /
    • 2010
  • A promising candidate material for a $H_2$ permeable membrane is SiC due to its many unique properties. A hydrogen-selective SiC membrane was successfully fabricated on the outer surface of an intermediate multilayer $\gamma-Al_2O_3$ with a graded structure. The $\gamma-Al_2O_3$ multilayer was formed on top of a macroporous $\alpha-Al_2O_3$ support by consecutively dipping into a set of successive solutions containing boehmite sols of different particle sizes and then calcining. The boehmite sols were prepared from an aluminum isopropoxide precursor and heated to $80^{\circ}C$ with high speed stirring for 24 hrs to hydrolyze the precursor. Then the solutions were refluxed at $92^{\circ}C$ for 20 hrs to form a boehmite precipitate. The particle size of the boehmite sols was controlled according to various experimental parameters, such as acid types and acid concentrations. The topmost SiC layer was formed on top of the intermediate $\gamma-Al_2O_3$ by pyrolysis of a SiC precursor, polycarbosilane, in an Ar atmosphere. The resulting amorphous SiC-on-$Al_2O_3$ composite membrane pyrolyzed at $900^{\circ}C$ possessed a high $H_2$ permeability of $3.61\times10^{-7}$ $mol{\cdot}m^{-2}{\cdot}s^{-1}{\cdot}Pa^{-1}$ and the $H_2/CO_2$ selectivity was much higher than the theoretical value of 4.69 in all permeation temperature ranges. Gas permeabilities through a SiC membrane are affected by Knudsen diffusion and a surface diffusion mechanism, which are based on the molecular weight of gas species and movement of adsorbed gas molecules on the surface of the pores.

실리콘 기판 위에 화학적 방법으로 증착된 구리 박막의 특성 연구 (A study on copper thin film growth by chemical vapor deposition onto silicon substrates)

  • 조남인;박동일;김창교;김용석
    • 한국결정성장학회지
    • /
    • 제6권3호
    • /
    • pp.318-326
    • /
    • 1996
  • 본 연구는 초고집적회로의 금속 배선으로써 보다 유용할 것으로 기대되는 구리박막의 화학적인 증착기술에 관한 것으로 precursor 물질로는 (hfac)Cu(I)VTMS ; (hevaflouoroacetylacetonate trimethyvinylsilane copper)로 명명된 금속 유기 물질을 사용하였다. 실험시스템의 초기 압력은 $10^{-6}$ Torr를 유지하고, 시스템의 챔버압력과 기판온도가 조정 가능하도록 설계, 제작되었다. 공정 조건에 따른 구리 박막 결정의 성장속도, Grain size, 전기적 성질을 측정하였다. 구리 박막을 증착하기 전에 W(tungsten) 또는 TiN(titanium nitride)이 증착되어 있는 실리콘 웨이퍼를 사용하였다. 본 연구에서는 $250^{\circ}C$이하의 상대적으로 낮은 실리콘 웨이퍼 온도에서의 실험이 가능하였으며 헬륨을 carrier gas로 사용하였는데 연구 결과 구리 박막 증착율이 $220^{\circ}C$에서 최대 $1,800\;{\AA}/분$으로 증가한 반면 표면 거칠기는 $200\;{\AA}$를 갖는 다결정 구리 박막을 관찰하게 되었다. 기판 온도가 $250^{\circ}C$이하일 때의 W(또는 TiN)과 $SiO_{2}$ 기판사이에서 구리 증착 선택성이 관찰되었으며, 최적의 기판 증착 온도는 약 $180^{\circ}C$와 반응용기 압력 0.8 Torr로 나타났다.

  • PDF

주조된 매크로 다공성 Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) 막대를 이용한 카페인과 트립토판의 분리 (Separation of Caffeine and Tryptophan Using Molded Macroporous Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) Rods)

  • 김룡매;염홍원;노경호
    • Korean Chemical Engineering Research
    • /
    • 제43권5호
    • /
    • pp.603-608
    • /
    • 2005
  • 주조된 매크로 다공성 poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) 막대를 간단한 주형 과정을 거쳐서 실험실 내 튜브모양의 주형인 크로마토그래피 칼럼($4.6{\times}100mm$)을 사용하여 자유 라디칼 중합에 의해 만들었다. 이는 에폭시 그룹이 유도된 일체형 칼럼과 황산을 이용한 에폭시드 그룹의 화학적인 변형과정을 이용하였다. 단량체 및 포로겐(세공을 생성하는 물질)의 비율, 온도 등 중합반응의 조건을 변화시켜서 세공크기를 조절하여 물질의 체류시간에 영향을 미쳤다. 본 연구에서는 주조된 일체형 칼럼을 이용하여 카페인과 트립토판을 분리하였으며, 중합원료조성이 일체형 칼럼의 효율과 선택도 그리고 분리도에 미치는 영향을 고찰하였다.

산화망간이 첨가된 혼합 연마제 실리카 슬러리의 산화막 CMP 특성 (Chemical Mechanical Polishing Characteristics of Mixed Abrasive Silica Slurry (MAS) by adding of Manganese oxide (MnO2) Abrasive)

  • 서용진
    • 전기전자학회논문지
    • /
    • 제23권4호
    • /
    • pp.1175-1181
    • /
    • 2019
  • 논문에서는 1:10으로 희석된 실리카 슬러리에 산화망간(MnO2) 연마제를 첨가하여 재처리된 혼합연마제 슬러리(Mixed Abrasive Slurry; MAS)의 화학기계적연마(CMP) 특성을 연구하였다. 최적의 연마 성능을 갖는 슬러리를 설계하기 위해서는 높은 연마율, 하부층에 대한 적절한 연마선택비, 연마 후의 낮은 표면결함, 슬러리의 안정성 등을 얻어야 한다. 산화망간이 첨가된 MAS의 연마 성능은 연마율 및 비균일도와 같은 CMP 성능, 입도 분석, 표면 형상에 대해 평가하였다. 실험결과, 높은 연마율과 낮은 비균일도 측면에서 볼 때 원액 실리카 슬러리와 대등한 슬러리 특성을 얻을 수 있었다. 따라서 본 연구에서 제안하는 MnO2-MAS를 사용하면 고가의 소모재인 슬러리를 절약하는데 매우 유용할 것이다.

묵납자루, Acheilognathus signifer (Cyprinidae; Acheilognathinae)의 패 내 산란과 적응전략 (Spawning in Mussel and Adaptation Strategy of Acheilognathus signifer (Cyprinidae: Acheilognathinae))

  • 백현민;송호복
    • 한국어류학회지
    • /
    • 제17권2호
    • /
    • pp.105-111
    • /
    • 2005
  • A. signifer의 숙주 조개인 U. douglasiae sinuolatus 각 장이 30~45 mm에서 대부분의 알과 자어가 발견되었으며, 각장이 30 mm 이상에서는 크기에 따른 선택성의 차이는 없었다. 조개 내에서 발견된 난 및 전기자어의 수는 1~7개(마리)이었으며, 난 또는 자어의 보유율은 1개(마리)가 50.0%로 가장 높았고, 조개 1개체 당 평균 보유수는 2.5개 (마리)였다. A. signifer의 전기자어는 조개내에서 유영능력을 갖추면 상새방으로 이동하였으며, 상새방에서 성장기간은 4~6주 정도로 추정되었다. 전기자어의 표피상 돌기는 부화 직후부터 관찰되었다. 부화 7일째부터 표피상돌기의 흡수가 진행되기 시작하였으며, 부화 13일째부터 대부분의 표피상돌기는 흡수되었고, 난황이 완전히 흡수된 직후인 부화 20일 후에는 표피상돌기가 완전히 흡수되었다.

결정성 Thiourea에 의한 유기 이성체 및 유사비점 혼합물의 분리 (Separation of Isomers and Close Boiling Mixtures by Crystalline Thiourea)

  • 김광주;이철호;이정민
    • 공업화학
    • /
    • 제7권1호
    • /
    • pp.129-135
    • /
    • 1996
  • 여러 가지 탄화수소를 분리할 수 있는 활성화된 결정성 thiourea의 포접성능이 조사되었다. $C_6$부터 $C_9$의 탄화수소의 단일성분, 이성분계에 대한 포접 평형 자료가 제시되었다. 만일성분에 대한 활성 thiourea의 포접능력은 탄화수소의 분자크기에 불규칙적인 거동을 하였으며 온도에 무관함 알 수 있었다. 이성분계 분리에서 분자량이 낮은 탄화수소가 분자량이 높은 탄화수소보다 활성 thiourea에 선택성이 컸다. $C_9$방향족 이성체의 분리를 통하여 활성 thiourea는 메틸그룹의 위치 즉 분자의 형상(configuration)에 따라 영향을 미침을 알 수 있었다. $C_9$방향족 잔사유로부터 pseudocumene은 활성 thiourea에 의하여 99.5wt%순도로 분리가 가능하였다. 본 연구에서 조사된 이성분계에 대한 활성 thiourea의 분리능력은 증류, 추출결정화, 부가결정화보다 큼을 알 수 있었다.

  • PDF

Recent advances in the characterization and the treatment methods of effluent organic matter

  • Ray, Schindra Kumar;Truong, Hai Bang;Arshad, Zeshan;Shin, Hyun Sang;Hur, Jin
    • Membrane and Water Treatment
    • /
    • 제11권4호
    • /
    • pp.257-274
    • /
    • 2020
  • There are many previous review articles are available to summarize either the characterization methods of effluent organic matter (EfOM) or the individual control treatment options. However, there has been no attempt made to compare in parallel the physicochemical treatment options that target the removal of EfOM from biological treatments. This review deals with the recent progress on the characterization of EfOM and the novel technologies developed for EfOM treatment. Based on the publications after 2010, the advantages and the limitations of several popularly used analytical tools are discussed for EfOM characterization, which include UV-visible and fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), size exclusion chromatography (SEC), and Fourier transform-ion cyclotron resonance-mass spectrometry (FT-ICR-MS). It is a recent trend to combine an SEC system with various types of detectors, because it can successfully track the chemical/functional composition of EfOM, which varies across a continuum of different molecular sizes. FT-ICR-MS is the most powerful tool to detect EfOM at molecular levels. However, it is noted that this method has rarely been utilized to understand the changes of EfOM in pre-treatment or post-treatment systems. Although membrane filtration is still the preferred method to treat EfOM before its discharge due to its high separation selectivity, the minimum requirements for additional chemicals, the ease of scaling up, and the continuous operation, recent advances in ion exchange and advanced oxidation processes are greatly noteworthy. Recent progress in the non-membrane technologies, which are based on novel materials, are expected to enhance the removal efficiency of EfOM and even make it feasible to selectively remove undesirable fractions/compounds from bulk EfOM.

커피 잔류물을 함유한 폐종이컵의 촉매 열분해 (Catalytic Pyrolysis of Waste Paper Cup Containing Coffee Residuals)

  • 신동익;정석민;김영민;이형원;박영권
    • 공업화학
    • /
    • 제29권2호
    • /
    • pp.248-251
    • /
    • 2018
  • 고정층 반응기와 파이롤라이저-가스크로마토그래피/질량분석기를 이용하여 커피 잔류물이 함유된 폐종이컵의 열분해 및 촉매 열분해를 진행하였다. 커피 잔류물이 함유된 종이컵의 무촉매 열분해에서는 많은 양의 오일이 가스 및 촤와 함께 형성되었다. HZSM-5와 HY 촉매의 사용에 따른 추가적인 분해 반응에 의해 오일의 양은 줄고 가스의 양은 증가하였다. HZSM-5와 HY의 산촉매 특성 때문에 커피 잔류물이 함유된 종이컵의 촉매 파이롤라이저-가스크로마토그래피/질량분석기 분석은 생성오일 중 방향족 화합물의 선택도를 증가시켰다. HY보다 강한 산세기와 중간 기공을 가진 HZSM-5의 특성으로 인해, HZSM-5상에서 커피 잔류물이 함유된 종이컵을 촉매 열분해한 경우 HY를 사용한 경우보다 휠씬 더 많은 양의 방향족 화합물이 생성되었다.

마산만 해역에서 서식하는 어류군집의 종조성 및 출현량 변동 (Temporal Variation in Species Composition and Abundance of Fish Assemblages in Masan Bay)

  • 곽성남;허성회
    • 한국어류학회지
    • /
    • 제19권2호
    • /
    • pp.132-141
    • /
    • 2007
  • 마산만 해역에서 유자망을 이용하여 어류군집의 종조성 및 출현량 변동을 조사하였다. 조사기간 동안 총 27종이 출현하였으며, 우점종은 전어(Konosirus punctatus), 숭어(Mugil cephalus), 멸치 (Engraulis japonicus), 샛돔 (Psenopsis anomala), 농어 (Lateolabrax japonicus), 주둥치(Leiognathus nuchalis), 등줄숭어(Chelon affinis), 전갱이(Trachurus japonicus)였는데, 이들 어종은 전체 개체수의 87.6%와 총 생체량의 95.4%를 차지하였다. 어류군집의 종조성 및 출현량 변동이 뚜렷하였는데, 출현 개체수는 2005년 3월과 7월, 생체량은 2005년 9월과 11월에 높게 나타났다. 한편 출현개체수 및 생체량은 모두 2005년 11월에 가장 낮게 나타났다. 수온이 어류군집의 종조성 및 출현량 변동에 가장 큰 영향을 주는 요인이었다. 유자망은 어획대상 어종이나 어획 체장에 강한 선택성을 가지고 있었지만, 상업성어종의 채집에 효율적이었다.