• 제목/요약/키워드: Size of loop

검색결과 460건 처리시간 0.029초

Fluoride single crystals for UV/VUV nonlinear optical applications

  • Shimamura Kiyoshi;Villora Encarnacion G.;Muramatsu Kenichi;Kitamura Kenji;Ichinose Noboru
    • 한국결정성장학회지
    • /
    • 제16권4호
    • /
    • pp.133-140
    • /
    • 2006
  • The growth characteristics and properties of large size $SrAlF_5$ single crystals are described and compared with those of $BaMgF_4$. Transmission spectra in the vacuum ultraviolet wavelength region indicate a high transparency of $SrAlF_5$ (about 90% without considering surface reflection loses) down to 150 nm, on contrast to the optical loses observed for $BaMgF_4$. The ferroelectric character of $SrAlF_5$ is evidenced by the reversal of the spontaneous polarization in a hysteresis loop. The higher potential of $SrAlF_5$ in comparison with $BaMgF_4$ for the realization of all-solid-state lasers in the ultraviolet wavelength region by the quasi-phase matching (QPM) technique is pointed out. $SrAlF_5$, besides a higher grade of transparency, shows a nonlinear effective coefficient similar to that of quartz and uniaxial nature, on contrast to the one order smaller nonlinear coefficient and biaxial character of $BaMgF_4$. The refractive index of $SrAlF_5$ from the ultraviolet to the near-infrared wavelength region is measured by the minimum deviation method. The Sellmeier and Cauchy coefficients are obtained from the fits to the curves of the ordinary and extraordinary refractive indices, and the grating period for the first order QPM is estimated as a function of the wavelength. The poling periodicity for 193 nm SHG from 386 nm is $4{\mu}m$.

규소 결정 표면의 구조 결함의 형성에 미치는 기계적 손상의 영향 (The influence of mechanical damage on the formation of the structural defects on the silicon surface during oxidation)

  • 김대일;김종범;김영관
    • 한국결정성장학회지
    • /
    • 제15권2호
    • /
    • pp.45-50
    • /
    • 2005
  • 규소 표면의 기계적 손상은 산화 공정 중에 규소 표면에 여러 가지 형태의 결함들을 발생 시킨다. 규소 표면에 손상을 주는 마모 입자가 커짐에 따라 OISF보다는 etch pit의 형상이 동굴형인 선 결함(line defects)들이 많이 발생된다. 이들 결함들은 실리콘 결정을 성장시키는 단계에서 형성되는 결함들과는 상호 관련이 없다. 방향성 응고법으로 성장된 규소 결정속에 존재하는 결함들은 주로 twin과 stacking fault들이며 응고과정에서 발생이 예상되는 응력에 의한 전위는 거의 발견되지 않았다. 따라서 Czochralski 법으로 성장된 단 결정 규소뿐 아니라 방향성 응고법으로 성장된 다 결정 규소 기판도 표면의 결함들을 이용하여 extrinsic gettering을 통한 규소 결정 내부의 불순물 제거의 가능성이 높다.

Analysis and reduction of thermal magnetic noise in liquid-He dewar for sensitive low-field nuclear magnetic resonance measurements

  • Hwang, S.M.;Yu, K.K.;Lee, Y.H.;Kang, C.S.;Kim, K.;Lee, S.J.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제15권2호
    • /
    • pp.20-23
    • /
    • 2013
  • For sensitive measurements of micro-Tesla nuclear magnetic resonance (${\mu}T$-NMR) signal, a low-noise superconducting quantum interference device (SQUID) system is needed. We have fabricated a liquid He dewar for an SQUID having a large diameter for the pickup coil. The initial test of the SQUID system showed much higher low-frequency magnetic noise caused by the thermal magnetic noise of the aluminum plates used for the vapor-cooled thermal shield material. The frequency dependence of the noise spectrum showed that the noise increases with the decrease of frequency. This behavior could be explained from a two-layer model; one generating the thermal noise and the other one shielding the thermal noise by eddy-current shielding. And the eddy-current shielding effect is strongly dependent on the frequency through the skin-depth. To minimize the loop size for the fluctuating thermal noise current, we changed the thermal shield material into insulated thin Cu mesh. The magnetic noise of the SQUID system became flat down to 0.1 Hz with a white noise of 0.3 $fT/{\surd}Hz$, including the other noise contributions such as SQUID electronics and magnetically shielded room, etc, which is acceptable for low-noise ${\mu}T$-NMR experiments.

Analytical Modeling of TCP Dynamics in Infrastructure-Based IEEE 802.11 WLANs

  • Yu, Jeong-Gyun;Choi, Sung-Hyun;Qiao, Daji
    • Journal of Communications and Networks
    • /
    • 제11권5호
    • /
    • pp.518-528
    • /
    • 2009
  • IEEE 802.11 wireless local area network (WLAN) has become the prevailing solution for wireless Internet access while transport control protocol (TCP) is the dominant transport-layer protocol in the Internet. It is known that, in an infrastructure-based WLAN with multiple stations carrying long-lived TCP flows, the number of TCP stations that are actively contending to access the wireless channel remains very small. Hence, the aggregate TCP throughput is basically independent of the total number of TCP stations. This phenomenon is due to the closed-loop nature of TCP flow control and the bottleneck downlink (i.e., access point-to-station) transmissions in infrastructure-based WLANs. In this paper, we develop a comprehensive analytical model to study TCP dynamics in infrastructure-based 802.11 WLANs. We calculate the average number of active TCP stations and the aggregate TCP throughput using our model for given total number of TCP stations and the maximum TCP receive window size. We find out that the default minimum contention window sizes specified in the standards (i.e., 31 and 15 for 802.11b and 802.11a, respectively) are not optimal in terms of TCP throughput maximization. Via ns-2 simulation, we verify the correctness of our analytical model and study the effects of some of the simplifying assumptions employed in the model. Simulation results show that our model is reasonably accurate, particularly when the wireline delay is small and/or the packet loss rate is low.

A Comparison of Surge Behaviors in Multi-Stage and Single-Stage Axial Flow Compressors

  • Yamaguchi, Nobuyuki
    • International Journal of Fluid Machinery and Systems
    • /
    • 제9권4호
    • /
    • pp.338-353
    • /
    • 2016
  • Information on the surge behaviors and stall stagnation boundaries for a nine-stage axial flow compressor are summarized on the basis of analytical data in comparison with those for a single-stage one, with attention to the pressure ratio effect. The general trends of the surge loop behaviors of the pressure-mass flow are similar for both compressors including the fact that the subharmonic surges tend to appear very near the stall stagnation boundaries. With respect to the nine-stage compressor, however, the mild loops in the subharmonic surges tend to be very small in size relative to the deep loops, and at the same time, insufficient surge recovery phenomenon, which is a kind of subharmonic surge, appears also far from the stagnation boundary for relatively short delivery flow-paths. The latter is found to be a rear-stage surge caused by unstalling and re-stalling of the rear stages with the front-stages kept in stall in the stalled condition of the whole compressor, which situation is caused by stage-wise mismatching in the bottom pressure levels of the in-stall multi-stage compressor. The fundamental information on the stall stagnation boundaries is given by a group of normalized geometrical parameters including relative delivery flow-path length, relative suction flow-path length, and sectional area-pressure ratio, and by another group of normalized frequency parameters including relative surge frequencies, modified reduced resonance frequencies, and modified reduced surge frequencies. Respective groups of the normalized parameters show very similar tendency of behaviors for the nine-stage compressor and the single-stage compressor. The modified reduced resonance frequency could be the more reasonable parameter suggesting the flow-induced oscillation nature of the surge phenomena. It could give the stall stagnation boundary in a more unified manner than the Greitzer's B parameter.

타원 1-타원형 인벌루트-타원 2 로브 형상의 제로터 최적 설계 (Optimal Design of Gerotor with Combined Lobe Profiles (Ellipse 1-Elliptical Involute-Ellipse 2))

  • 곽효서;이승환;김철
    • 대한기계학회논문집A
    • /
    • 제39권12호
    • /
    • pp.1237-1244
    • /
    • 2015
  • 제로터(Gerotor) 오일펌프는 구조가 간단하고 1 회전당 토출량이 많기 때문에 소형화에 유리하며, 자동차의 엔진 윤활유 공급원 및 자동 변속기의 유압원으로 널리 사용되고 있다. 최근 자동차 산업에서는 연비향상 및 소음저감이 가장 중요한 문제로 대두되는데, 내접형 기어펌프 측면에서는 제로터의 치형설계 및 포트형상 설계를 통하여 이를 대처하고 있다. 이에 본 논문에서는 유량맥동이 매우 작은 값을 가지도록 조합된(타원 1-타원형 인벌루트-타원 2) 외부로브 형상에 대하여 치형의 기구학적 조건을 만족하는 식을 유도하여 내부로브 형상을 창출하였으며, 이에 대한 첨점 및 루프가 발생하지 않는 설계인자 범위를 결정하였다. 또한 설계인자의 변화가 치형의 형상 및 성능인자(유량, 유량맥동)에 미치는 영향을 파악하여 최적의 치형을 구하고자 하였다.

자기장 차이 측정용 플럭스게이트 마그네토미터 제작 (Construction of a Fluxgate Magnetometer for the Measurment of Magnetic Field Difference)

  • 최근하;손대락;조육
    • 한국자기학회지
    • /
    • 제5권4호
    • /
    • pp.304-308
    • /
    • 1995
  • 일차코일에 흐르는 전류에 의하여 코아의 피상 보자력을 측정하여 자기장을 측정 할 수 있는 두개의 플럭스게이트센서로, 두 지점에서 자기장 차이를 측정할 수 있는 플럭스게이트 마그네토미터를 제작하였다. 센서코아는 교류 자기이력곡선상에서 각형성이 좋은 Co-계 비정질리본 $VITROVAC^{\circledR}6030$$2\;mm{\times}30\;mm$의 크기로 에칭하여 사용 하였으며, 일차코일 및 이차코일은 각각 315회 권선하였다. 두 센서의 일차코일은 외 부 자기장의 차이를 측정하기 위해 같은 극성으로 병렬로 연결하였고, 이차코일은 직렬 연결하여 적분하므로서 두 코아의 평균 자속밀도를 얻게 하였다. 본 연구에서 제작 한 자기장 차이 측정용 플럭스게이트 마그네토미터는 $1.6{\times}10^{6}V/T$의 민감도와 1 Hz 주파수 대역폭에서 1nT의 분해능을 얻었다.

  • PDF

강한 압력파동에 구속된 액체 추진제 연소응답의 지배인자 (Controlling Factors of Open-Loop Combustion Response to Acoustic Pressures in Liquid Propellant Rocket Engine)

  • 윤웅섭;이길용
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제23회 추계학술대회 논문집
    • /
    • pp.267-273
    • /
    • 2004
  • 본 논문에서는 강한 압력파동에 구속된 액체 추진제 연소응답의 지배인자를 규명하고 비정상 거동 특성을 평가한다. 외부 압력섭동에 의해 교란된 탄화수소 계열 액체 추진제의 비정상 거동을 수치계산하고 연소응답의 관점에서 분석한다. 2상 사이의 평형을 고려한 1차원 액적기화 모델을 적용하고 압력파동은 인위적인 조화함수식으로 설정한다 외부 기상의 압력과 온도, 액적의 초기 직경과 내부온도, 외부 압력파동의 진폭과 구동 주파수 등 액체 로켓의 주요 설계인자 및 작동변수의 영향을 고찰한다. 본 연구를 통해 외부 압력파동의 구동 주파수와 외부 기상압력은 연소응답의 크기와 위상을 결정하는 지배인자임이 규명된 반면 외부 기상온도, 액적의 초기 직경과 외부온도 및 압력파동의 진폭 등은 연소응답과 약한 상관관계를 갖거나 그 영향이 미미하다. 기화열 섭동의 위상 및 액적표면과 내부의 파동에너지 전파특성이 연소응답의 크기와 위상을 결정한다.

  • PDF

STM32F4 기반의 실시간 임베디드 시스템의 가동시간 향상을 위한 긴 꼬리 와치독 타이머 기법 (Long-Tail Watchdog Timer for High Availability on STM32F4-Based Real-Time Embedded Systems)

  • 최하연;윤지완;박서연;김예솔;박상수
    • 한국멀티미디어학회논문지
    • /
    • 제18권6호
    • /
    • pp.723-733
    • /
    • 2015
  • High availability is of utmost importance in real-time embedded systems. Temporary failures due to software or hardware faults should not result in a system crash. To achieve high availability, embedded systems typically use a combination of hardware and software techniques. A watchdog timer is a hardware component in embedded microprocessors that can be used to automatically reset the processor if software anomalies are detected. The embedded system relies on a single watchdog timer, however, can be permanently disabled if the timer is not properly configured, e.g. falling into an indefinite loop. STM32F4 provides two different types of watchdog timer in terms of timing accuracy and robustness. In this paper, we propose a hybrid approach, called long-tail watchdog timer, to utilize both timers to achieve self-reliance in embedded systems even though one of timers fails. Experimental results confirm that the proposed approach successfully handles various failure scenarios and present performance comparisons between single watchdog timer and hybrid approach in terms of configuration parameters of watchdog timers in STM32F4, counter value and window size.

MIMO 시스템에서 M-PSK 성운을 이용한 새로운 차분 동 이득 전송 기술 (A Novel Differential Equal Gain Transmission Technique using M-PSK Constellations in MIMO System)

  • 김영주;서창원;박노윤
    • 전자공학회논문지
    • /
    • 제52권1호
    • /
    • pp.24-31
    • /
    • 2015
  • 코드워드의 인자로 M진 위상 편이 방식(M-ary phase shift keying, M-PSK)를 사용하는 차분 코드북은 Long term Evolution (LTE), LTE-Advanced (LTE-A) 그리고 WiMax 시스템 등에 제안된다. 인접하는 무선 채널의 시간 상관 특성에 의해 연속된 선부호화 행렬 내 양자화된 채널 정보는 천천히 변화된다. 이는 전체 무선 채널 공간을 양자화 하지 않고, 시간 상관 특성에 따른 채널 공간 내 일부분만을 양자화하여 피드백하기 때문에 기존과 동일한 크기의 코드북을 구성해도 가상적으로 보다 정확한 채널정보를 양자화할 수 있어 채널 용량이 증가하는 효과를 갖는다. 제안하는 코드북은 constant modulus, complexity reduction, 그리고 nested property와 같은 LTE release-8 코드북 특성을 갖는다. 또한 동 이즉 전송 특성을 갖기 때문에 상대적으로 저렴한 비선형 증폭기를 사용할 수 있어 가격의 제한을 받는 단말기 설계에도 이점을 갖는다. 컴퓨터 시뮬레이션을 통해 제안하는 차분 동 이득 전송 기술은 동일한 피드백 비트 수를 갖는 기존의 LTE-8 코드북보다 향상된 성능을 보인다.