• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1270-1273
• /
• 2004

The combination of methane-chemical activation and Self-propagating High-temperature synthesis (SHS) has widened the possibilities for both methods. For YBCO systems the investigation showed that a short-term mechano-chemical activation of initial powders before SHS leads to single-phase and ultra-fine products. A new technique for preparation ultra-fine high-temperature superconductors of YBCO composition with a grain size d < $1{\mu}m$ is developed. The specific feature of the technique is formation of the $YBa_2Cu_3O_{7-x}$ crystalline lattice directly from an X-ray amorphous state arising as a result of mechanical activation of the original oxide mixture. The technique allows the stage of formation of any intermediate reaction products to be ruled out. X-ray and magnetic studies of ultra-fine high temperature superconductors (HTS) are carried out. Dimension effects associated with the microstructure peculiarities are revealed. A considerable enhancement of inter-grain critical currents is found to take place in the ultra-fine samples investigated.

• 전자공학회논문지S
• /
• 제34S권4호
• /
• pp.42-49
• /
• 1997

A conventional adaptive noise canceller (ANC) using LMS algorithm suffers from the misadjustment of adaptive filter weights due to the gradient-estimate noise by input speech signal at steady state. In this paper, an ANC is proposed which uses the combination of VSLMS (variable step size LMS) and SA (sign algorithm) to improve steady state performance and convergence rate. SA algorithm is applied in speech region to prevent the weights from perturbing by output speech of ANC and VSLMS algorithm is applied to improve convergence rate and channel tracking ability in silence region and adaptive transient region. In compute rsimulation, the performance of the proposed VSLMS-SA combination algorithm is much better than LMS algorithm and the algorithm, recently proposed by greenberg, with adaptation step-size parameter determine dby sum method in convergence rate, channel tracking and steady state performance.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.658-667
• /
• 1996

A computer vision system was developed to automatically detect and locate the oyster hinge line, one step in shucking an oyster. The computer vision system consisted of a personal computer, a color frame grabber, a color CCD video camera with a zoom lens, two video monitor, a specially designed fixture to hold the oyster, a lighting system to illuminate the oyster and the system software. The software consisted of a combination of commercially available programs and custom designed programs developed using the Microsoft CTM . Test results showed that the image resolution was the most important variable influencing hinge detection efficiency. Whether or not the trimmed -off-flat-white surface area was dry or wet, the oyster size relative to the image size selected , and the image processing methods used all influenced the hinge locating efficiency. The best computer software and hardware combination used successfully located 97% of the oyster hinge lines tested. This efficienc was achieve using camera field of view of 1.9 by 1.5cm , a 180 by 170 pixel image window, and a dry trimmed -off oyster hinge end surface.

• Management Science and Financial Engineering
• /
• 제9권1호
• /
• pp.4-10
• /
• 2003

We introduce a new estimator of the uncertainty of a jackknife estimate of standard error: the jack-knife-after-jackknife (JAJ). Using Monte Carlo simulation, we assess the accuracy of the JAJ in a variety of settings defined by statistic of interest, data distribution, and sample size. For comparison, we also assess the accuracy of the jackknife-after-bootstrap (JAB) estimate of the uncertainty of a bootstrap standard error. We conclude that the JAJ provides a useful new supplement to Tukey's jackknife, and the combination of jackknife and JAJ provides a useful alternative to the combination of bootstrap and JAB.

• Management Science and Financial Engineering
• /
• 제9권1호
• /
• pp.1-10
• /
• 2003

We introduce a new estimator of the uncertainty of a jackknife estimate of standard error: the jack-knife-after-jackknife (JAJ). Using Monte Carlo simulation, we assess the accuracy of the JAJ in a variety of settings defined by statistic of interest, data distribution, and sample size. For comparison, we also assess the accuracy of the jackknife-after-bootstrap (JAB) estimate of the uncertainty of a bootstrap standard error. We conclude that the JAJ provides a useful new supplement to Tukey's jackknife, and the combination of jackknife and JAJ provides a useful alternative to the combination of bootstrap and JAB.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.82-92
• /
• 2016

The reduction of carbon dioxide emission is hot issue in the world because we are confronted with serious global warming and climate change. As a part of carbon dioxide reduction efforts, various approaches for increasing filler loading have been carried out in order to decrease the energy consumption in papermaking processes. Effects of the pretreatment of GCC with cationic starch and MFC on the flocculation behaviour of GCC were investigated in this study. Pretreatment of GCC with cationic starch caused the change of electric charge of suspension and flocculation behaviour of GCC. Largest flocculation size was obtained near the isoelectric point in the case of cationic starch treatment. When MFC (30 times grinded) was added after preflocculation of GCC with cationic starch, the flocculation size was increased, but largest flocculation size was obtained at -150 mV of electric charge of suspension in this study. However the addition of highly grinded MFC (60 times grinded) caused smaller flocculation size of GCC than those of MFC (30 times grinded). When GCC and MFC were mixed first, and then cationic starch was added, the characteristics of MFC and the change of electric charge which could be brought by cationic starch did not affect the flocculation size of GCC at all. The flocculation size obtained by the combination of cationic starch and MFC was smaller than those of cationic starch. These results show that flocculation behaviour could be controlled by the change of electric charge of suspension and the combination methods of cationic starch and MFC.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1140-1145
• /
• 2004

Laser-induced incandescence (LII) is introduced as a valuable tool for the characterization of nanoparticles in flame environments. This technique is based on the heating of the particles by a short laser pulse and the subsequent detection of the thermal radiation. It has been applied successfully for the investigation of soot in different fields of application. The evaluation of the temporal decay of the laser-induced incandescence (LII) signal from soot particles is introduced as a technique to obtain two-dimensional distributions of particle sizes and is applied to a laminar diffusion flame. This novel approach to soot sizing exhibits several theoretical and technical advantages compared with the established combination of elastic scattering and LII, especially as it yields absolute sizes of primary particles without requiring calibration. With this technique a spatially resolved 2-D measurement of soot primary particle sizes is feasible in a combination process form the ratio of emission signals obtained at two delay times after a laser pulse, as the cooling behavior is characteristic of particle size.

• 한국의류학회지
• /
• 제28권5호
• /
• pp.626-636
• /
• 2004

The purpose of this study was to show a theoretical system of expressional area, the characteristics and the effects which is applied to fashion illustration by metaphor theory. The theoretical system of expressional area was analyzed by category analysis and 150 fashion illustrations from 1900 to 1999 were analyzed by contents analysis. The results of this study were as follows: Metaphor in fashion illustration was categorized to replacement, parody, heterogeneous combination, surrealism, magnification and reduction of size, optical illusion, juxtaposition and distortion of form. In detail, First, replacement was showed omission of form, non-object color, texture. Second, parody was showed using the part in artistic work, differentiation of original work. Third, heterogeneous combination was showed unreal body combining between animal and plant. Fourth, surrealism was showed creation of object which is impossible to present. Fifth, magnification and reduction of size was showed bizarre magnification of part of body, size of clothing. Sixth, optical illusion was showed ambiguity of object because of creation of new form. Seventh, juxtaposition was showed the parallel of contradicting idea and change of meaning between heterogeneous objects. Eighth, the distortion of form was showed grotesque distortion of part of body and disgusting object.

• 건축역사연구
• /
• 제28권5호
• /
• pp.19-26
• /
• 2019

The subjects of this study were limited to Silla buddhist temple remains in the 6~8th century, where the excavation survey report was published and the details of the remains of the corridor are revealed. Since the corridor completes the structure of temple and is involved in formation of the space, the building plan for corridors is thought to have an intention linked to the entire temple. Thus, more closer study is required for this construction plan to identify the role of corridors. The corridor is a building that has a low architectural hierarchy and completes the layout and composition of the temple. In the unit planning of the corridor, unit were designed to be of a certain size in the temple layout. Then, the overall scale was made by adding the fixed size of unit. The combination of corridors are the combined points of paths and were used as visual points. The structure of the corridor was constructed to be adjusted according to the size of the main compartment of the building to which it was connected and inserted under the roof of the building. The adjustment of the unit changed in the range of 0.5 to 2 of Silla's system of measurement. The usage of embedded pillar in the corridor presents a new perspective on Silla architecture.

• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.375-382
• /
• 1999

The purpose of this article is to present the clinical and laboratory procedures for single tooth restoration using 'Combination Implant Crown'. It is cemented on implant abutment and that abutment is screw-retained over implant body. This type of implant restorations has the advantages of cement-retained restoration while being antirotational and retrievable. And, more esthetic and functional result can be achieved by minimizing the size of access hole. The results were as follows : 1. Preparation of abutment below the cuff line should be avoided 2. Axial reduction of implant abutment should not be excessive because it may weaken the abutment 3. More esthetical and functional occlusal surface was achieved with a minimal access hole which is slightly larger than the diameter of hex driver to enable future total retrievability. 4. Combination Implant Crown has the advantages of both the cement-retained and screw-retained type implant restoration. 5. Cementation between implant crown and abutment reduces screw loosening through even force distribution