• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.229-236
• /
• 2015

This paper describes the effect of aggregate size on compressive behavior of high-strength steel fiber reinforced concrete. The Specified compression strength is 60 MPa and the range of fiber volume fraction is 0~2%. The main variable is the aggregate size, which was used for the aggregate size of 8 and 20 mm. So, ten concrete mixtures were prepared and tested to evaluate the fresh and hardened properties of SFRC at curing ages (7, 14, 28, 56 and 91 days), respectively. Items estimated in this study are the fresh properties (air contents, slump), hardened properties (compressive strength, modulus of elasticity, post-peak response and compressive toughness). As a result, the aggregate size has little effect on the compressive strength and modulus of elasticity. On the other hand, the ductile behavior was shown after post peak and the compressive toughness was increasing as decreasing the aggregate size. These effects are clearly represented in the fiber volume fraction 2%, which are the point appeared fiber ball. It is considered that the decreasing the aggregate size has effect on the fiber dispersibility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7781-7787
• /
• 2015

The purpose of This paper is to address the development on supply-demand outlook model of aqua-cultured korean Flatfish and introduces a projection of supply-demand and market prices during 2015-2017 using developed model. The supply-demand outlook model is composed as a partial equilibrium model of Korean Flat fish. Each equation in the model is estimated by the econometric techniques. A reviews of the demand-outlook model stability is also carried out by the references based on RMSPE. MAPE, and Theil's inequality coefficients. According to the reference of RMSPE, the error rates of the forecasting values of the aqua culture area, culturing quantity, production quantity, market price show less than 4%, The production quantity and farm price are predicted respectively to be 42,561MT and 10,191KW per kg in 2017.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.21-30
• /
• 2015

Korean government has promoted the projects of National Geographic Information Systems since 1995 and the utilization level of Korean National Spatial Data Infrastructure based on them has also developed. However, due to the limit to domestic market size and the legal regulation on prohibition of large sized companies' expansion into domestic spatial information markets, Korean spatial information markets are tied up in term of industrial competitiveness. To overcome those problems and evade the domestic red oceans, it is necessary to find new one in overseas' blue ocean markets. It is estimated that overseas spatial information market will be grown to 125 billion-dollar size and the annual growth rate of it will be reached to 10.5% until 2015. Thus, Asian spatial information market has a huge growth potential and it is newly rising blue oceans for Korea. Advanced countries such as Finland, Germany, Sweden, and Japan have already expanded their market size into the newly industrializing countries. To step with advanced countries, it is time to set up the new globalization strategy of Korean spatial information for expansion into newly industrializing markets. The purpose of this study is to analyze the SWOT of domestic spatial information, investigate the status on spatial information of Asian developing countries, and suggest the globalization strategy of Korean spatial information for expansion into them. The globalization strategy can be labelled as K-FBI composed of 4 domains such as Knowledge sharing platform, Frontier, Back to the basic, and Internalization. In near future, the establishment and performance of road map based on the strategy will be the milestone for Korean spatial information companies' advance into Asian developing countries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.147-156
• /
• 2016

This study analyzed the impact of changes in the construction business on construction company insolvency according to their size using the vector error correction model. First, this study applied EDF (Expected Default Frequency), which was calculated by KMV (Kealhofer, McQuown and Vasicek) model, as a variable to indicate the insolvency of construction companies. This study set 30 construction companies listed to KOSPI/KOSDAQ for estimating the EDF by size and construction companies were divided into two groups according to their size. To examine the construction business cycles, the amount of construction orders according to the type-residential, non-residential, and civil work- was used as a variable. The serial data was retrieved from TS2000 established by the Korea Listed Companies Association (KLCA), Statistics Korea. The analysis period was between the second quarter of 2001 and fourth quarter of 2015. As a result of calculating the EDF of construction companies by size, as it is generally known, the large-sized construction companies showed lower levels of insolvency than relatively smaller-sized construction companies. On the other hand, impulse response analysis based on VECM confirmed that the level of insolvency of large-scaled companies is more sensitive to business fluctuations than relatively smaller-sized construction companies, particularly changes in the residential construction market. Hence it is a major factor affecting the changes in insolvency of large-sized construction companies.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.5
• /
• pp.185-193
• /
• 2015

Anodization of die-casted AZ91D magnesium alloy was carried out using silicate based electrolyte solution instead of fluoride based solution to improve biocompatibility of oxidized layers. The anodic layer obtained from silicate based solution has smaller size of pore and smoother surface, resulting in lower corrosion rate in simulate body solution (SBF). Effect of enhanced structural and chemical properties in oxidized layer on biocompatibility was carefully considered.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.905-911
• /
• 2015

In this study, to examine the effect of a hole size change(smaller hole diameter) in the outer region of the lower-support-structure-bottom plate(LSSBP) on the reactor core-inlet flow-distribution, simulations were conducted with the commercial CFD software, ANSYS CFX R.15. The predicted results were compared with those of the original LSSBP. Through these comparisons, it was concluded that a more uniform distribution of the mass flow rate at the core-inlet plane could be obtained by reducing the hole size in the outer region of the LSSBP. Therefore, from the nuclear regulatory perspective, design change of the hole pattern in the outer region of the LSSBP may be desirable in terms of improving both the mechanical integrity of the fuel assembly and the core thermal margin.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2015

The environmental regulations for CO2 emissions from the ship have been established recently, and fuel oil price has been increased continuously. In order to overcome these circumstances, Energy Saving Devices (ESDs) have been developed continuously to reduce the fuel oil consumption and improve the propulsive efficiency. This paper describes the trial performance of PBCF (Propeller Boss Cap Fins), SCHNEEKLUTH duct, Asymmetric rudder bulb and Mewis duct applied to handy-size bulk carriers. As a result, SCHNEEKLUTH duct is more effective than other energy saving devices at the reducing the fuel oil consumption and the improvement of the propulsive efficiency. In addition, it is confirmed that SCHNEEKLUTH duct is really effective in the vibration of the deck house. And the fuel oil consumption can also be reduced through main engine de-rating.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2015

Various types of inorganic and organic colloids are present in natural water including groundwater. Previous studies showed that Fe, Mn and Al are colloid-forming elements and dissolved concentrations can be erroneous for these elements if water samples are not properly filtered. Dissolved concentrations of elements including Ca, Na, Mg, K, Fe, Mn, Si and Al in groundwater from alluvial and bedrock aquifers, and surface water near Nakdong River were determined to evaluate effects of colloids on dissolved concentrations in natural water samples using various pore sizes of filters. Groundwater is mostly anoxic and have elevated concentrations of Fe and Mn, which provides a unique opportunity to observe the effects of colloids on dissolved concentrations of colloid-forming elements. Membrane filters with four kinds of pore sizes of 1000 nm, 450 nm, 100 nm, and 15 nm were used for filtration of water samples. Concentrations of dissolved concentrations in each filtrate did not show significant differences from 1000 nm to 100 nm. However, concentrations of all elements considered were decreased in the filtrates obtained using 15 nm pore size filters by 10 to 15% compared to those using 450 nm except for bedrock groundwater. Al in surface water showed a distinct linear decrease with the decrease of filter pore sizes. These results showed that 100 nm pore size had little effect to remove colloidal particles in alluvial groundwater and surface water in our study. In contrast, significant concentration decreases in 15 nm pore size filtrates indicate that the presence of 15 to 100 nm colloidal particles may affect determination of dissolved concentrations of elements in natural water.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.132-141
• /
• 2015

We focus on the fire scheduling problem (FSP), the problem of determining the sequence of targets to be fired at, for the objective of minimizing makespan to achieve tactical goals. In this paper, we assume that there are m available weapons to fire at n targets (> m) and the weapons are already allocated to targets. One weapon or multiple weapons can fire at one target and these fire operations should start simultaneously while the finish time of them may be different. We develop several dominance properties and a lower bound for the problem, and suggest a branch and bound algorithm implementing them. Also, In addition, heuristic algorithms that can be used for obtaining an initial upper bound in the B&B algorithm and for obtaining good solutions in a short time were developed. Computational experiments are performed on randomly generated test problems and results show that the suggested algorithm solves problems of a medium size in a reasonable amount of computation time. The proposed lower bound, the dominance properties, and the heuristics for upper bound are tested in B&B respectively, and the result showed that lower bound is effective to fathoming nodes and the dominance properties and heuristics also worked well. Also, it is showed that the CPU time required by this algorithm increases rapidly as the problem size increases. Therefore, the suggested B&B algorithm would be limited to solve large size problems. However, the employed heuristic algorithms can be effectively used in the B&B algorithm and can give good solutions for large problems within a few seconds.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.19-32
• /
• 2016

Due to the increasing fiscal burden and structural unbalanced premium/benefit costs, the new reform on the government employees pension system (GEPS) was considered even after the recent reform in 2009. This article examines the various effects of recent amendment in 2015 on GEPS using a simple probabilistic model. We consider effects on both sides, the pensioners and the government. First of all, the expected net value of pension payment for an individual employee was calculated based on the supposed survival distribution. The fairness of individual pension holders was compared using the benefit-cost ratio. Secondly, from pension system users' point of view, the default probability and the government subsidy were examined by Monte-carlo simulation. From the simulation experiment, we could see that the 2015 reform plan indeed reduces the default probability and the size of the fiscal burden of government by increasing the premium and decreasing the benefit. However, the size of the effect is not very standout at this moment because the number of new employees who are fully subject to the reform will be much smaller than the number of previous employees for a while. Thus, the effect of the reform is expected to appear in a slow manner.